Це відео не доступне.
Перепрошуємо.
Schrader Valve Ghetto Tubeless
Вставка
- Опубліковано 22 кві 2020
- From Schrader with tubes to Schrader tubeless
this is pretty cool, using gorilla tape and a stans notubes 32mm
universal valve, its an easy and cheap upgrade for everyone
Subscribe TO MY CHANNEL
/ mcmtb
Check out PK's Bike Shop's Channel
www.youtube.co....
Follow me on STRAVA
/ strava
FOLLOW ME ON FACEBOOK
/ markchance08
FOLLOW ME ON INSTAGRAM
MARKCHANCE
#GHETTOTUBELESS
Using an adapter on a presta valve to fill a TON of air into the tire while doing a tubeless set up is a PAIN IN THE ASS. That schrader valve stem for tubeless is a god send ! THANK YOU !
Love it! I've always hated Presta valves so I'm going to convert just to have the Schrader.
I did my first tubeless conversion last week. I dry fit the tire,pumped it up with a floor pump and it set the bead. So I let the air out , bead held, and put the sealant thru the valve. I couldn’t believe how easy it was, I heard horror stories
Very lucky! I gave up and bought a compressor on sale. But I got 3 bikes all tubeless
So far I haven't used my compressor on any tubeless stuff yet
i just had one of those horror stories last night. which carried into this morning. it mounted though
Sounds crazy but works great .
Spray some starter fluid ( like for Diesel engines) a short spray into the tire . Throw a match . It ignites . Blows the tire up and into the bead . Then fill quickly . The fire sucks up the air and deflates it . 1st time I saw that was the mechanic putting a backhoe tire on the rim . I used it ever since . Motorcycle tires , lawnmower tires etc .
Inner tubes smells like fish😂
Jerzem Manuel yep I tell people that and they say I’m crazy.
Some sandpaper smells like fish when you wet sand with it. Probably has fish guts in its manufacture. Ive never smelled fishy innertubes though. My nose doesn't always smell well due to allergies. Tubes just stink like rubber to me. Maybe they used fish guts in yours!
There’s something so cool about a Schrader tubeless setup
GREAT JAY-OH-BEE Master MC... yeahh boy.. you got 'em . Gorilla tape; Stan's brand sealant and schraeder valve... you got it. excelent . Great info. Thank you for sharing .
Thanks Bro :)
@@MCMTB bro
A tip for converting non tubless rims to tubless is you double wrap the rim tape to get the extra width so you have a nice seal beetween the tire bead and the wheel
Did a ghetto with the ground control flak jacket. Just put more rim tape to thicken the bead area of the non tubeless rim. It will work, but is a tough job. Needed a lot of soap and water.
How did it hold up ?
@@volcomchristo held up like a champ. Hard to remove the tire after a puncture though. Of all the luck a cow horn protruding from the dirt.
Schrader is much better than presta, very much universal and tougher, less problem especially when pumping air, in gas stations, no need for adaptor, great video very informative, stay safe. 👍
That’s not ghetto tubeless. That’s legit tubeless
Nah it’s ghetto cause it’s gorilla tape and shrader
Ghetto is inner tube rim strips, gorilla tape, valves cut from tubes, etc
Wrap a tie down around tire circumference to force beads to tighten / move outwards.
Spay soapy water generously around both beads and hit it with a medium blast from any compressor.
My Ryobi 18v One Gallon tank works fab for this - this method is legit on every FAT or MTB tubeless conversion I've tried.
Dude, love your videos man, learnt something new every time. Good job, keep it up.
With car tires if you can’t get it seated you can use a ratchet strap or even some rope with a stick twisted in it to press in the center of the tire to force the sidewalls out so the bead seats. Seems like if you have a stiff enough sidewalk it should work with bikes as well.
I don't think they should make a dad bod shirt in that size haha
I love your channel dude.
I did almost the same thing to my pitch comp1x. I just cut out the valve from the inner tube and used the same tire on the wheel. But I think your way was an upgrade from what I did.
hi alfredo, u use the same tyre , ground control ? and fit well ? have any problem in this time with that tyre? i have a pitch to with that tyre ground control like the video.
@@manuelmtgful yeah same tire. I used gorilla tape to seal the holes of the spokes and then filled it with stans tire sealant. Then I used an air compressor to fill my tire. I also pulled the edges of the tire closer to the rim, so the bead can catch on the rim. And VUALÁ!!
Innertubes Smells like A Dead Rat for me AHAHAHAHA
Cool setup, pang bakbakan na sa trails! 💪😎 very informative.
The mounting of the Michelin tire was piece of cake. Try out org UST tires on an UST rim... I managed to break at least 5 pretty expensive tire levers and still the tire wasn't in correct place on the rim... UST was horrendous to mount but oh boy did it work wonders in the woods with super low pressure and you did not need to use any sealant at all. Even though my rear started to leak after 5 years.
You deserve one million subs
It does smell like weird stuff lol. I think u are some tipe of McGyver good job..👍👍🤜💥🤛
Nice DIY erp...man, this vid made me go back and tinker on my old cannondale 29er.
The fish smell is from ground up fish bones inside the tube, to stop the tube sticking together. That's why if you cut open a tube it seems dusty
Did this 3 years ago with stock Weinmann non-tubeless rims and wired WTB Vigilante 2.3s and Schrader valves. Worked like a charm but i could be better if I used legit sealant intended for bike use. I used the cheap sealants from local motorcycles shops that almost doesnt work LOL
Nice procedure.
6:18 You can actually get loose tires to seat but you just have to put the wheel down and focus on pumping as fast as you humanly can (might not want to show that on camera though).
And pulling the tires out on both sides towards the beads
@@ns671fr tricky but helps for sure
Can u tell me on long term if this tubeless conversion holds the air? I have the same rims and I thought they are not tubeless ready...
Just has to be double walled thats basically how tlr wheels are
I did this - I tried gorilla tape and gorilla tape clear. Both tapes lasted about 2 months for me but then failed so ultimately I went with proper rim tape and that's lasted for much longer. IMO worth the hassle of using the wrong product.
you should have done this outside man :D lol your floors T_T
Great content. Just subbed. Keep up the good work. 👍🏻
Hahahaha pampa good vibes ko lagi panonood sa channel mo idol 🤣💪
Good to know, I'm tired of replacing inner tubes, and don't feel like paying $60+ for each tubeless tire.
Dude wtf you just demotivated me with that double wall rim stuff and I've been working on this for 2 days.
Send it dude
You lost me with the natural light hahaha
You know it 🤣
Specialized really needs to make their ground control tires tr I have like two pairs from old bikes and I wish I could use them
Just bought a set of Specialized tires, ground control for the rear and fast trak for the front, both are 2bliss ready(as they put it)
We need more quarantine entertainment
Great video! what size mm Schrader valve did you use?because there is a few different sizes. I have a 20x4.0 rim for a fat stroke tire but don't know what MM valve size I need.
Noice. Mines using presta valves and since I'm also a roadie I can use the old presta valve cores in case my others get damaged
Looks easy to do 😂
How did you do it?
nice idol..nice vid. tagal kong dna napapanood ang mga blog mo..
nakaka ingit nmn bike mo... hehe.. herap ang maherap talga...celphone na nga lang dpa makabili...kaya sa comp. rental nalng..makapanood ng mga blog. mo..ingat lagi...ka erp.
Presta is way easier to fill up tire, with smaller pump and 1 gram plastic presta>schrader adapter would've fixed it ;)
Yes, old air inside tubes always smell like fish, over 30y smelling bike stuff
Hmmm tube less .idk . I cut a old tube down the middle and inserted it between the tire and tube. I have hit a couple of jagged little rocks they use here to fill holes in the road and so far it's holding up . Worth thinking about though .
Very informative!👏
Nice build time new shaved erp..like the shirt men but it doesnt significe you,skinny erp lol..✌💪
I have a question I got a used mtb. All tubeless. The front tire is flat and when I checked there’s a lot of sealant dried up on the inside, resembles a “booger” texture. Can I add sealant over this?
Yes
I think about weight that the tape you used it’s very heavy,
Thanks for your videos
you need an air compressor. bet that specialized would have mounted right up. never could have mounted my ust tire on my ust rim
Wondering what sealant smells like
The rim was Jalco if its from Specialized Pitch bike
Yea double wall rim and be shure your tires are tubeless ready. If not, It don’t work
The worst is a fat tire bike. Nightmare to set up tubless if the rim profile is boxed vs V shaped. My 80mm Kona wheels are a pain to set up
i used an automotive schrader valve and worked perfectly, just need to cut some rubber
Greetings, hey, do you think the hub is compatible from 9 to 11sp but on a road bike?
I don’t think so my friend
Wazzup erp from Philippines again 😂🤣
Bagong upload medyo madagaldagal naghintay pero ok lng
That is so nice... Saw ur vid converting the Specialized to 1x8 thats nice also... Question... Can you make it 1x10?...or the rear hub can only use 8 speed cassette?... Thanks...
Most 8 speed freehubs can fit 8/9/10
Trust me I will shove an 11 speed cassette on it
You can fit 10 speed cassette in it
I totally can relate to the fish smell of innertubes
Muy bien..... Sin tanto merchandizing
right, now I understand.
Yeah i used the Gorilla tape before they work good bro👍
My specialized pitch came tubeless ready
Yown may pag asa na pla ma tubeless ang rim ko na shrader valve ang butas....salamat erp...meron ba sa amazon nyan
Meron bro search mo lang tubeless schrader
true my inner tubes smell bad too
Im sure this is going to be on the pitch. What’s the max size tire can I fit in the rear? Can someone help me? Idol Mark?
Yun oh...thanks erp✅
Yes i smell the same thing too sir... I tought there is something wrong with my innertube....
Ayuz erp naka tubeless na si Specialized
can't find any stan's tubeless schrader valve here in the Philippines.
Try mO sa Quiapo Erp, or as Lazada shoppee
When the sealant dries you have to take 1 part of the tyre apart right?
Nice tip.. i wonder if i can do this on my 2015 Pitch Sport.... can you tell me how wide are your tires? Mine are 2.4 in front and 2.2 on rear. I think that i will try to go tubeless. Of course, i don't have the original tires ( Ground control ) , i have a pair of Continental Mountain King.
The only way to figure it out is to try it
Gorilla tape makes a 1" wide tape. Cheap at Wally $3. I used to see a 3/4" at ACE True Value but last time I checked they no longer carry it.
Nice content erp!
I always get that fish smell aswel,i wish someone could tell me why that happens
okay na sana pero nong nagsabi ka na yung presta nozzle bka madali ng mga kahoy sa trail, bakit wala kbang cap nyan,
Yes innertubes stink worth the old air 🤣😍🇬🇧
Ayus! Gamitin na!
Swak na swak sa XC trails Dito samin :)
Cool tires😎
i have the same bike... the stock rims r tubeless ready
Cool thanks
Is there no schrader rim that is tubeless ready on the market?
Why mine doesn't hold air?
Ganyan talaga pag hindi tubeless iba ang amoy😂..pa shout out po
Better sealant than Stans:
1 Part RV Antifreeze solution
1Part "Mold Builder" liquid latex
1 Part Slime tire sealant
Make a gallon for less than quart of Stans.
Won't dry out & form "Stanimals" - those dried latex boogers, lol...
Gorilla type is sick
Did you leave it at 60psi?or air out a bit after install??nice video by the way I'm gonna try this aswell
I let it sit on 60psi all night then I set it down to 21psi
Have you try tubuless rim tape from aliexpress?
I would not call it ghetto, my specialized pitch came with tubes that were threaded tight to rim, made for easy filling when pressure was low. When i went tubeless i used shrader valve stems, just easier and fit my pump i have mounted on frame.
You can make a compressor out of a 10 usd garden sprayer
29 er is the best
Is it just a normal Shrader valve use from cars or is there a specific one for a bike?
VALVE STEM PAIR, UNIVERSAL, SCHRADER, 32MM, 10MM BASE www.amazon.com/dp/B01G67MP2Q/ref=cm_sw_r_cp_api_glt_fabc_F8Q6Z20MG9PMZGC86Y9B
Does it really guarantee kuya?
Will it work for any type of rims? As long as its double wall?
I have here a Mavic XM 119, I guess? 😅😅
Double wall ✔
You can make a presta valve fit in a Schrader hole by cutting down a valve cap
hey bro, just so you know, with those rims you can change it to presta and it works well
How
@@mathew_chank by drilling out the hole
Try making the tape thicker for the non tubeless-ready tire to work..
Ayus Noy. trails n yan. Godbless and Ride Safe Noy
Inner tubes do smell like fish
What tire model is that? I know it’s Michelin but I couldn’t find what the name was
I cant stress this enough but duuuuude please METRIC UNITS
you can do it on a single wall too, I guess. why not?
No
Frame is all I had haha...
Wish i could buy equipment to make my own mtb
Sir how much po ung Schrader valves na stans salamt