Couple things. WTT group B is still possible with assists, although fairly difficult and usually depends on the track. I typically run steering off, brakes low, TC on, with 5 sensitivity and tilt A controls. I’ve gotten to the top 1000 this way, although often parts of the lap will require entirely disabling brakes, especially if there’s a chicane (Le Mans Mulsanne, Porsche test track, COTA national, etc). 21 upgrades to the best car is usually enough to be comfortably in group C though. Second, Ahmed is driving an Agera R 🙂
Just an observation for anyone struggling with 4.4. When you push ahmed offtrack, make sure that you dont go off track with him. If you do go off track, it may the not fail you immediately but once you finish the race, you’ll be failed no matter how many times you pushed him off the track
I managed only to finish, when I made sure all 8 or 9 cars got off track at least once. I believe actual Ahmeds car, is not necessarily the one with his name written. This might happen because of bot slowing or something...
Nice to see a glimpse of the “old” ME7 again, smashing and forcing people off track etc. You have been driving a bit to clean as of late to the point it’s get a bit boring to watch. A pit maneuver every once in a while is refreshing to see!
Some of the earlier stages were a lot harder than later ones and it really messed with my head I thought I wouldn’t have enough funds to keep upgrading lol. As I had upgrades prioritizing braking, in 4.3 I was only able to hit speed twice on main straight with a slipstream. I had a slipstream on the main back straight so I hit twice there then once more on main straight and once more on back straight but threw it in really deep.
That’s a good point. Maybe it’s down force. Although then the brakes should get worse and worse as the car slows down. I checked and it has LMP1 brakes. Still, it’s a pretty heavy car at 1100 kg or 2420 pounds! In comparison of Formula One car on average is 798 kg or 1759 pounds. I shouldn’t say average, I believe that’s the regulated minimum weight.
For 4.3 I don’t think there are any places than the main straight can hit the required speed There are no wall to bounce it and if you drive in deep you will go into the sand and waste all the 2 second off track
@@GoldenChen_screen_recording for the latter straight, u need to brake early for the chicane going to the straight so you could full throttle out that chicane while carrying higher speed. The moment u hit 354 kph there, BRAKE immediately and start drifting as there is not enough road to brake fully. My setup is this: 121222, as the brakes on this are very bad.
About the whole Ahmed discussion. Different countries pronounce the name Differently. The way u did would be how Middle Eastern people would pronounce the name. Where I'm from, the name's pronounce more differently. At the end of the day, it's the lingo from where you've lived or grown up from. Like from where I'm from, even the guys who's name is that, doesn't pronounce it the way u tried. It's pronounce differently here with the same spellings.
Thank you, that is the point I was trying to make. Names are known differently all over the world. It doesn’t make any one of them wrong. I do understand that passionate car people would like to see the car name said properly. After I did this video, I found a Rimac interview where they actually say they purposely chose an international pronunciation of their name. That pronunciation is “Rih-Mack”, exactly the way most people say it. The last thing you want when you’re trying to have a successful business is people feeling embarrassed every single time they say your name. However, in multiple videos, I watched the founder, of course always calls the car company by the name he knows.
Just speak in your accent. Languages are meant to understand each other. So as long as the 2nd person understands your words, it will be completely fine. Pronouncing words from other languages is really difficult.
@@incognitohuman1959 bhai mere. International ho yah gali gali ka ho kya farak padta hai? Agar tum alphabet ka pronounce karoge toh Rimac hi ayega . Woh to ME7 pata nahi kis planet ka hai jo Rimask bula Raha hai . Ekdom lodu ki tarah 😂😂😂😂😂😂🤣
To be fair, it’s both. I’ve watched multiple videos done by the Rimac company. During the video they constantly called their company “Rih-mats”. However, they are good businessman, and understand that an international pronunciation is a good idea when you want to sell cars internationally😅😎👍. Of course they really appreciate it when people say the name as they know it. He seems like a really great guy. In multiple interviews he never corrects anybody. It takes the pressure off the conversation when you go with an international spelling.
Couple things. WTT group B is still possible with assists, although fairly difficult and usually depends on the track. I typically run steering off, brakes low, TC on, with 5 sensitivity and tilt A controls. I’ve gotten to the top 1000 this way, although often parts of the lap will require entirely disabling brakes, especially if there’s a chicane (Le Mans Mulsanne, Porsche test track, COTA national, etc). 21 upgrades to the best car is usually enough to be comfortably in group C though.
Second, Ahmed is driving an Agera R 🙂
Just an observation for anyone struggling with 4.4. When you push ahmed offtrack, make sure that you dont go off track with him. If you do go off track, it may the not fail you immediately but once you finish the race, you’ll be failed no matter how many times you pushed him off the track
This did not help for me 😢
I managed only to finish, when I made sure all 8 or 9 cars got off track at least once. I believe actual Ahmeds car, is not necessarily the one with his name written. This might happen because of bot slowing or something...
Nice to see a glimpse of the “old” ME7 again, smashing and forcing people off track etc. You have been driving a bit to clean as of late to the point it’s get a bit boring to watch. A pit maneuver every once in a while is refreshing to see!
Some of the earlier stages were a lot harder than later ones and it really messed with my head I thought I wouldn’t have enough funds to keep upgrading lol. As I had upgrades prioritizing braking, in 4.3 I was only able to hit speed twice on main straight with a slipstream. I had a slipstream on the main back straight so I hit twice there then once more on main straight and once more on back straight but threw it in really deep.
The same thing in Endurance is carried over to Elimination. Upon Elimination, bots will ONLY COAST in their final four secs of presence.
That’s interesting, I don’t think I’ve ever encountered it before. Pretty funny!
4:08 the IDR has one of the best brakes. Maybe because it has a lot of downforce that actually gives a chance to make powerful brakes.
That’s a good point. Maybe it’s down force. Although then the brakes should get worse and worse as the car slows down. I checked and it has LMP1 brakes. Still, it’s a pretty heavy car at 1100 kg or 2420 pounds! In comparison of Formula One car on average is 798 kg or 1759 pounds. I shouldn’t say average, I believe that’s the regulated minimum weight.
U might see me spam this.
To FU this car, R$3,370,900 and 1510 gold is needed.
It is advised to wait for a sale for cheaper costs.
Why spam? It is bcos there may be ppl who only watch this stage and question the FU costs
For 4.3 I don’t think there are any places than the main straight can hit the required speed
There are no wall to bounce it and if you drive in deep you will go into the sand and waste all the 2 second off track
There are 2: one is the straight aft passing the lap line; the other is the straight coming to the sharp hairpin (need drifting)
@@icyb5975 I found neither of them possible even with heavy drifting
Or maybe I have less upgrades so I have to drive even deeper
@@GoldenChen_screen_recording for the latter straight, u need to brake early for the chicane going to the straight so you could full throttle out that chicane while carrying higher speed. The moment u hit 354 kph there, BRAKE immediately and start drifting as there is not enough road to brake fully.
My setup is this: 121222, as the brakes on this are very bad.
You should be able to drift just nicely (or barely) into the sharp hairpin at the end w/o going off-track.
Your brakes are still way better than mine
I only have 113111 so I don’t think it’s possible
Race 4.4, Drove ahmed off track on uphil last hairpin, finished 1st- GOAL FAILED!!! WTF ????!!!!
I was worried about that myself. That’s why I ended up smashing everyone a whole bunch of times. I don’t know why that happens sometimes.
Ahmed or Ehmed is the same thing in pronouncing but it just depends on the accent
In This One Upgrades 333333.
About the whole Ahmed discussion. Different countries pronounce the name Differently. The way u did would be how Middle Eastern people would pronounce the name. Where I'm from, the name's pronounce more differently. At the end of the day, it's the lingo from where you've lived or grown up from.
Like from where I'm from, even the guys who's name is that, doesn't pronounce it the way u tried. It's pronounce differently here with the same spellings.
Thank you, that is the point I was trying to make. Names are known differently all over the world. It doesn’t make any one of them wrong. I do understand that passionate car people would like to see the car name said properly. After I did this video, I found a Rimac interview where they actually say they purposely chose an international pronunciation of their name. That pronunciation is “Rih-Mack”, exactly the way most people say it. The last thing you want when you’re trying to have a successful business is people feeling embarrassed every single time they say your name. However, in multiple videos, I watched the founder, of course always calls the car company by the name he knows.
Just speak in your accent. Languages are meant to understand each other. So as long as the 2nd person understands your words, it will be completely fine. Pronouncing words from other languages is really difficult.
It's Rimac nevera 😂😂😂😂
Kya bol raha hai re. His pronunciation is right. Watch his stage 1 video
@@incognitohuman1959 tu stage 5 wala video dekh
@@aniketdutta1567 haa. International pronunciation accept kiya hai
@@incognitohuman1959 bhai mere. International ho yah gali gali ka ho kya farak padta hai? Agar tum alphabet ka pronounce karoge toh Rimac hi ayega . Woh to ME7 pata nahi kis planet ka hai jo Rimask bula Raha hai . Ekdom lodu ki tarah 😂😂😂😂😂😂🤣
To be fair, it’s both. I’ve watched multiple videos done by the Rimac company. During the video they constantly called their company “Rih-mats”. However, they are good businessman, and understand that an international pronunciation is a good idea when you want to sell cars internationally😅😎👍. Of course they really appreciate it when people say the name as they know it. He seems like a really great guy. In multiple interviews he never corrects anybody. It takes the pressure off the conversation when you go with an international spelling.