Hot Toys Hulkbuster 1/6 Figure Articulation Demo (4K)

Поділитися
Вставка
  • Опубліковано 2 жов 2017
  • Enjoy this beast. Have to make one correction though, the knees actually do articulate, however you will definitely have to lay this monster down on your bed or the carpet to be able to do it. The figure is just too heavy.
  • Розваги

КОМЕНТАРІ • 47

  • @Sunstreaker68
    @Sunstreaker68 2 роки тому +2

    The knees have articulation as well. So far I've gotten one click above the knee, and two clicks below the arc reactor. And I suspect the upper joint can straighten out further.

  • @1968KID
    @1968KID 6 років тому

    The lower leg can bend under the arc reactor. I got mine yesterday and put it through the paces. Your video did me a solid because I couldn't close the helmet until I saw your video today. Thanks again!

  • @kahouwong6981
    @kahouwong6981 6 років тому

    Great review!!! Thanks!!! Would like to ask how talk it is if displaying like how you do, opening the heltmet? my cabinet only got 57cm, not sure if it will suit

  • @cdogcdog4814
    @cdogcdog4814 6 років тому +2

    *The knees DO articulate and thighs have a thigh swivel.*
    I believe there is side to side ankle tilts as well but don't quote that. Cool to see this thanks bro 😉

    • @blakewilkey7647
      @blakewilkey7647 2 роки тому

      The thights have a thigh swivel? where? I cannot get it to rotate lol

  • @ddiaz28
    @ddiaz28 6 років тому +1

    Great video. Wanted to see how much the legs move before I went and posed it. Initially trying to move the legs I was nervous as to how much torque to put into it. I was worried I might break it. It's definitely tricky to move on your own simply because it's so heavy. Did you have any issues closing the chest up? I really had to force the inner bottom chess pieces to close enough to be able to magnetically attach that Y shaped piece to both sides. The chest pieces seem to cover the central chest light on mine which was kind of a bummer. I also had to figure out how to put the helmet back on with the bust in. Ended up having to remove the head to get it on properly. It's an amazing figure. Just a bit finicky in places. Maybe I was doing something wrong though.

  • @ianr94
    @ianr94 6 років тому

    great ,thanks

  • @rafaeldelpozo1902
    @rafaeldelpozo1902 4 роки тому

    What is the song of the beginning of the video?

  • @j4lex0329
    @j4lex0329 6 років тому +1

    Hi, you think this is better than the King arts battle damage Hulkbuster?

  • @floppysocks4489
    @floppysocks4489 3 роки тому

    At 5:46 anyone else this same issue where the the left toe is not flat to the ground like the right foot. I’ve had mine for a while and I never figured out how to fix it.

  • @coollectionFun
    @coollectionFun 6 років тому

    Please let me know when or if you try. Thanks

  • @briantidwell651
    @briantidwell651 5 років тому

    I'm super new to Hot Toys (just made 1st purchase)... I got this, the Mk.43 and some other stuff... you've got me kinda nervous now lol... REALLY don't wanna break or scratch anything lol

  • @paullomeli
    @paullomeli 6 років тому

    What's the secret no at the beginning? Great video by the way!!

  • @senng9760
    @senng9760 6 років тому

    The ironman inside is mark 46 right?

  • @coollectionFun
    @coollectionFun 6 років тому

    I'm hoping to maybe get in on an angle cause I see it's 17"wide

  • @stormshadow_3000
    @stormshadow_3000 6 років тому +1

    I am waiting for mine. Honestly, after seeing your review and Budget Stark's, I would have preferred they gave us a remote controlled open and close head mechanism like when he suits up in the movie. And/or a jackhammer arm add on switch out that has jackhammer action too.
    Serious question: Do you really see the point of being able to insert an entire iron man figure?!?! I do not. Seriously, the bust accessory was and is enough to pose with.....I don't know how I fell for the hype of how cool it was that hot toys was modifying it in order to accommodate a full figure that now I realize will never be noticed....Never!!! You put it in and you just see the head anyway.....Correct me if I am wrong, but doesn't the additional bust accessory do the same freakin thing...WTF!?
    The original idea of just a bust was perfect and the additional time we waited and money they spent on this nonsensical modification baffles my mind now. Money and time better spent on a freakin jackhammer arm and remote feature.
    Do you see what I am saying? Someone, give me an Amen!
    Just for laughs, I guess I can try to put in a hot toys Tony Stark, naked from the waist down. It will be my own private joke on everyone who sees my Hulkbuster. RDJ free-ballin it, why the hell not? He could be fappin to a picture of Miley Cyrus pissin on the side of the road for all we know...Why the hell not?!
    It will be my own special and personal protest to the absurdity that went down in designing what could have been a truly epic Hot Toys grail piece.
    Don't get me wrong, I still can't wait for it. Peace out Mofos!!!

  • @leunghon8920
    @leunghon8920 6 років тому +1

    Grettings friend, incredible collection, unique! Im from colombia and im starting in this world of 1/6 figures , my quiestion is what do u recomend, buy this hulkbuster or 3 or 4 hot toys figure , sorry for the question:)

    • @IAmToys
      @IAmToys  6 років тому

      leung hon
      Unless you’re a diehard iron man fan, or this is must have for you, I would just buy 3 or 4 separate figures instead.

    • @OfficialDeadEndz
      @OfficialDeadEndz 6 років тому

      3 or 4 separate figures

    • @mdk29
      @mdk29 6 років тому

      Get the Hulkbuster if you still can. It is a must have for most collectors. It is a very beautiful, gigantic and unique piece.

    • @jamesgordon1520
      @jamesgordon1520 6 років тому

      They all are nice, But you have gotten all they will ever be. That's because they made so many now that what you paid for them will be it and no more. They are valuable if it's like a 100th made are something like that, and if you don't know are have the first HulkBuster when it was put out it was smaller but if you have it, it's bigger than the New ones $$$$

  • @cram2979
    @cram2979 4 роки тому

    What's the width on this?

  • @jjg8945
    @jjg8945 6 років тому

    Where have you displayed this, I have a couple of detolfs and was wandering if it woukd fit at an angle in the bottom area??? Thanks

    • @IAmToys
      @IAmToys  6 років тому

      PokeCollector UK
      It definitely doesn’t fit straight in, and diagonally, just barely. And it doesn’t look to good on an angle. I’m going to build a separate shelf with lighting for it.

    • @jjg8945
      @jjg8945 6 років тому

      I Am Toys thanks for the reply mate

  • @coollectionFun
    @coollectionFun 6 років тому

    Does it fit in your IKEA shelves, If you take a shelf out?

    • @IAmToys
      @IAmToys  6 років тому

      727272frank
      I haven’t tried yet, but it might be a tad too wide.

  • @mrgorgun
    @mrgorgun 6 років тому

    I am dying to get this but i'm in Europe where sideshow dont send it..i can get it from Hong Kong for 1150$. Think its worth it?

    • @Oscar_Charlie_Delta
      @Oscar_Charlie_Delta 6 років тому +1

      QueensRock
      Hello QueensRock! I have it and it's AWESOME! $1150 from Hong Kong is not bad, slightly less than I've seen from most sellers.

    • @mrgorgun
      @mrgorgun 6 років тому

      and why am i a fucking idiot?

    • @Oscar_Charlie_Delta
      @Oscar_Charlie_Delta 6 років тому

      QueensRock
      Hello again QueensRock! Did you end up purchasing the Hulkbuster from Hong Kong?

    • @mrgorgun
      @mrgorgun 6 років тому

      not yet,they are out of stock at the moment.

    • @sunnychan7574
      @sunnychan7574 6 років тому

      Hello QueensRock, have you purchase this Hulkbuster yet? I have one for sale in Hong Kong. If you are interested, we can discuss furthermore.

  • @Patrickchan621
    @Patrickchan621 6 років тому

    knees do bend about 45 degrees it looks like from the toystv video. Check it out at the 14:57 mark

    • @IAmToys
      @IAmToys  6 років тому +1

      Patrick Chan
      Thanks man, but yeah I know. I added an edit to the video description last night to explain that as well. I couldn’t get them to budge, but then Anthony (budget) let me know he had the same problem, but then laid it down flat and was able to get it to articulate. It’s crazy, even the directions don’t tell you the knees can move, which made me think that they could not. They show just 30° movement of the leg front and back. I always find it interesting when hot toys leaves stuff out like that. Lol

    • @Patrickchan621
      @Patrickchan621 6 років тому

      I Am Toys For all the money we pay, I wish hot Toys could give us nicer instructions. Give us some color! Lol

  • @ashgaming7045
    @ashgaming7045 6 років тому +1

    Your fire alarm sucks.... It's not hard to remove the dry wall and reseal it!!!

  • @kir9696
    @kir9696 6 років тому +1

    Bro what are you talking about knees do articulate look at the instruction!

    • @IAmToys
      @IAmToys  6 років тому

      Lirik Talanov
      Yeah, I kind of adjusted that in the video description about three or four days ago. And I have the instructions, and on no page do they specifically state they articulate, they only delineate that the leg itself moves back-and-forth 30°. I’m actually not the only one who thought they did not articulate, as budget Stark initially thought the same thing. 😉

    • @kir9696
      @kir9696 6 років тому

      Ah glad you figured it, didnt see the description my b.

    • @philsipad
      @philsipad 4 роки тому

      Not only do the knees articulate, they are actually DOUBLE JOINTED. They bend above AND below the knees.

  • @Bjoker0388
    @Bjoker0388 6 років тому +1

    Wrong iron man inside it looks better with the screen accurate mark 43 😒

    • @IAmToys
      @IAmToys  6 років тому +1

      william silva
      I actually mention that some people are going to have a problem with that in my main review of the figure. And I mentioned that for me, this is the way I want to have it displayed. To each their own brother. I could really care less about screen accuracy. I’m not one of those collectors.

    • @stormshadow_3000
      @stormshadow_3000 6 років тому +3

      Wrong iron man....LOL. Who the f*ck cares. Just for that comment, I am going to put my disco mark whatever in my hulkbuster. Watch for the picture in the forums. It's the one giving you the middle finger.

    • @stormshadow_3000
      @stormshadow_3000 6 років тому +3

      william silva You think people like "I am toys" and me give a shit about who we are talking to? We collect and pose our shit however the fuck we like. Take your beta OCD ass back to fanboy home base where you spineless geeks suck each other off.