Option #4 and one I would consider before irrevocably painting my tank is to wrap it. It is cheaper indistinguishable from paint, and easily changed or reverted back to stock if you sell the bike. Multiple colors can be seamlessly accomplished although one like yours might be a little tricky without an overlay.
Great video Tony. Very professionally produced. Great to have company info, rather than a just a tank reveal. May buy a spare tank for my T120 now and have them paint it. I want to keep the stock tank, as I still love the cranberry and silver. Plus I paid extra for it....Lol Keep up the good work. Wheels next.
I like the colors and design, but hate the "Triumph". Personally, I'm always trying to remove branding from all of my items, (I always remove logos and branding from my cars and bikes). If Triumph wants me to advertise for them, they should be paying me a commission.
Hey, stupid question, does the fuel line have some type of shutoff valve when you disconnect it? Can I remove the tank with like 1/4 tank in it or do I need to completely drain it?
Not a stupid question at all. The speed clip will shut the flow off when disconnected, but you will get some dribble so keep a little tub to hand or just prop the hose in an upward position.
Great vid as usual Tony! I painted my street twin in flat grey (the one the new Smarts have, pretty close to the t120), and put Triumph emblems I bought for 35€, I also had the shop remove the street twin logo on the side covers, and paint the three light grey elements is the front, black... I had always wanted to do it before I bought it, so it was done within a week ;). I gave the parts to the shop, but I doubt they took the inner sensors out... it all cost me 350€ (not to take anything away from 8ball, I’m certain there superior job is worth every penny), whereas the dealer was asking 1100€ for the job
Hey tony awesome job. I just wanted to c id u can made a video of a tool kit that u carrries with you. On your street twin. Since i have one. But wanted to c what are the most basic tool to get u out of trouble
To do all this to your bike must have cost you a pretty penny !!!!, How much did it all cost from start to finish? Sorry if it is a bit nosey, Do you work in the motorcycle buisness? Whatever lovely bike mate , See you later ,peace 👍👍👍👍🇬🇧🇬🇧🇬🇧🇬🇧
Yep, it all adds up, and I’m scared to get a calculator out. I’ve been lucky enough to get a few freebies and discounts though. I don’t work in the business, but I’m working on that 😉
Tony, I wonder... As I want to do a paint job of the tank on my Street Cup too, is that mandatory to remove the fuel pump and everything's inside ? I'm a bit afraid to have some fuel leaks from the rubber gasket after. I don't have such company in Belgium (8 ball customs), it's a shame because sending them my tank fuel by post could be a tricky job.
Thanks Tony for the info,,, its timely because I,v just got a Royal Enfield Himalayan,,and it all kindoff of mat black,,very good for off road work,,but on road with my all black riding gear,,its abit (alot) like the black knight!!! so I,m thinking a 1930s green with old style transfers,,nothing too flash...I see you did only the tanks ,,where I,ll have tank ,side panels,and mudguards...What do you think,,that shop ain,t too far from me,,,regards
Love the videos !! I’m painting my tank and was wondering do you know the specs for bolts when putting everything back together ? Or where I might be able to find ? Thanks
Tony, would you mind sharing the total cost of the mods you applied (estimated) since the day you purchased the stock street twin? Great job by the way!!!!!
I need to find a version of 8 Ball in the states. What an awesome company! I would use them in a heartbeat. I may have to just wrap my tank. Not sure its worth sending my tank overseas...also, your tank is great!
Great video, wheels are spoilers at the moment with the red tape but of course, you've got it covered. Chrome spokes perhaps? You missed the 'big' question out, how many monies?
Thanks Colin, yes I couldn’t wait to get the wheels changed before I put the video out, but that’s coming soon. I didn’t mention money because there is such a wide variance depending on tank, design, type of paint, number of colours etc etc
It would have been nice to have had your side covers repainted at the same time with a similar design if just to remove the "street twin" which looks kind of tacky in my opinion. Overall, that tank looks sharp.
The Triumph ones look decent and are not priced too badly. Outside of that you'd be looking at Kineo, Alpina or Canyon. All make fantastic wheelsets, but they are not a cheap item
Thanks David, yep it’s not going to appeal to everyone , but that’s the point eh? It actually looks a lot brighter in this video than in the flesh. I need to work on my colour grading 😂
@@mancavemoto The engine oil can be removed by unscrewing the oil drain plug. Why not have a coolant drain plug to let out all the coolant? It would be nice. I don't like messing with the hose.
@@mancavemoto Oh, sorry. I thought I commented on another video where you let out the coolant. I did use this video to help me remove my street twin's tank, though. I enjoy your channel. Good stuff.
Thanks Lee and no problem. Obviously the wheels don't match now so they need sorting, and the exhaust is getting a change up. Fingers crossed its done for the DGR
Hi Tony, Nice job! I love it... Cannot wait any longer to see your next step with the new exhausts... Maybe a stunning Triumph VH 2:1? Talking about that (the VH 2:1 exhaust) was thinking to paint the two heat shields/ panels with ceramic black matte colour, exactly like ZardLab does on its own exhaust... Any opinion? Thanks!
Looks great! I plan on swapping my tank (found a good deal on eBay). Did you apply any kind of gasket treatment/sealant when you reinstalled the fuel pump assembly? Is there a suggested torque for the bolts?
Ah ha!! Well played sir! I’m really enjoying your videos. Im going to watch all of them. I’m new to the triumph family and appreciate the knowledge that you share. Cheers!
I think it looks great. Really nice design and great colours. You say you're doing the wheels... They certainly need to lose the red rim tape. Too much of a clash.
I'm looking forward to the finished product. I think the whole bike is shaping up fantastically well. You should be really pleased with it, you've done a lovely job.
I'm sure not cheap but how much would it cost to have that design done by 8-Ball? I'm wondering if I can find a local body shop that can customise a tank.
Hi Roger, probably not as expensive as you think. As an indicator a single colour would set you back about £250. If the design isn’t too complex thats not going to jump up excessively. There will be cheaper options out there for sure, but the quality and service 8 Ball offer make it worth it in my eyes. Give em a call, an estimate will cost you nothing....
@@mancavemoto yes that's not unreasonable at all. I think this is a job I can get done over the winter break...now to think of a design...I like your blue design...retro
And I think sometimes that is the problem, people see the name and just assume it’s expensive, and its not always the case. If you get to see the paint job in the flesh, it looks much better than i captured on the video.
Indeed Denis, but if I were to be pedantic that’s not a paint job 😉 Actually I did look at that, but because the tank had decals on it, under a clear coat, it would be still quite a bit of work to flat it, remove the decals and feather in before applying the wrap.
@@mancavemoto thanks, and done. I need a suggestion (and you're the first one that come in my mind when talking about custom!) Long story short is... I got my tank damaged and scratched, insurance refuse to pay the damage THEY did, and now I have an expensive unexpected bill to pay (fumes, considering I have a street twin with black matte paint, which I love). So my options are either pay for the respray in the factory, and get it back as it were, or make it completely new and customized. Do you think a customization will raise the resell value? Third option.. paint it myself, low budget but no guarantee of the result. Is it messy to repaint a tank? Thanks!
Have you ever done a valve clearance check on your Street Twin yet? That would be interesting to watch.
Not yet, but that’s a good idea, something I’ll proabably need to do pretty soon
Option #4 and one I would consider before irrevocably painting my tank is to wrap it. It is cheaper indistinguishable from paint, and easily changed or reverted back to stock if you sell the bike. Multiple colors can be seamlessly accomplished although one like yours might be a little tricky without an overlay.
The tank looks fantastic, it's given me some ideas for the side panels on my T100.
Excellent! Thanks Stephen
It looks excellent! Option 4...buy a second hand tank (or a new unpainted one from Triumph) and do the custom paint job on that....just in case.
Yep, actually there were about 8 options I can up with 😂
Great video Tony. Very professionally produced. Great to have company info, rather than a just a tank reveal. May buy a spare tank for my T120 now and have them paint it. I want to keep the stock tank, as I still love the cranberry and silver. Plus I paid extra for it....Lol Keep up the good work. Wheels next.
Thanks Corvair, very kind of you. Exhaust next week, then wheels after that
Nice video. Just removed my tank. Did you get any leaks when replacing the fuel pump? I'm not sure if I need to remove it
Cheers, I didn't no it ll went back together with no problems
I like the colors and design, but hate the "Triumph". Personally, I'm always trying to remove branding from all of my items, (I always remove logos and branding from my cars and bikes). If Triumph wants me to advertise for them, they should be paying me a commission.
Hey, stupid question, does the fuel line have some type of shutoff valve when you disconnect it? Can I remove the tank with like 1/4 tank in it or do I need to completely drain it?
Not a stupid question at all. The speed clip will shut the flow off when disconnected, but you will get some dribble so keep a little tub to hand or just prop the hose in an upward position.
@@mancavemoto awesome, thanks man. I love your videos
Great vid as usual Tony! I painted my street twin in flat grey (the one the new Smarts have, pretty close to the t120), and put Triumph emblems I bought for 35€, I also had the shop remove the street twin logo on the side covers, and paint the three light grey elements is the front, black... I had always wanted to do it before I bought it, so it was done within a week ;). I gave the parts to the shop, but I doubt they took the inner sensors out... it all cost me 350€ (not to take anything away from 8ball, I’m certain there superior job is worth every penny), whereas the dealer was asking 1100€ for the job
Tony, how did they deal with the embossed raised TRIUMPH on the tank? Mine is seemingly stamped in the tank.
Hey tony awesome job. I just wanted to c id u can made a video of a tool kit that u carrries with you. On your street twin. Since i have one. But wanted to c what are the most basic tool to get u out of trouble
Thanks Rene, and the answer to your question is quite simple....I don’t carry any tools!
Ok.
To do all this to your bike must have cost you a pretty penny !!!!,
How much did it all cost from start to finish?
Sorry if it is a bit nosey,
Do you work in the motorcycle buisness?
Whatever lovely bike mate ,
See you later ,peace 👍👍👍👍🇬🇧🇬🇧🇬🇧🇬🇧
Yep, it all adds up, and I’m scared to get a calculator out. I’ve been lucky enough to get a few freebies and discounts though. I don’t work in the business, but I’m working on that 😉
If you do go into the bike buisness good luck, go for it ,you only live once
See you later mate, take care, 👍👍👍🇬🇧
Cheers Buddy
Great to see you posting again. The tank looks amazing, you should be very proud.
Now, you need to change the color of the wheels in blue! It was a fantastic job
Question - When you put all the parts back in the tank, where does the hose you touched (4:56-4:57) go?
Well spotted, theres a nozzle on the pickup/filter that it just pushes onto
Thank you :)
@@praving2284 no worries
Tony, I wonder... As I want to do a paint job of the tank on my Street Cup too, is that mandatory to remove the fuel pump and everything's inside ? I'm a bit afraid to have some fuel leaks from the rubber gasket after. I don't have such company in Belgium (8 ball customs), it's a shame because sending them my tank fuel by post could be a tricky job.
Hi, no not necessary, it can be masked off carefully. I’m sure there is a custom painter that can be found in Belgium? Which town are you in?
Thanks Tony for the info,,, its timely because I,v just got a Royal Enfield Himalayan,,and it all kindoff of mat black,,very good for off road work,,but on road with my all black riding gear,,its abit (alot) like the black knight!!! so I,m thinking a 1930s green with old style transfers,,nothing too flash...I see you did only the tanks ,,where I,ll have tank ,side panels,and mudguards...What do you think,,that shop ain,t too far from me,,,regards
That sounds nice, yep I have different plans for the side panels. Worth having a chat to them, give Lucy a call and tell her you saw my video ;)
Love the videos !! I’m painting my tank and was wondering do you know the specs for bolts when putting everything back together ? Or where I might be able to find ? Thanks
The bolts for the fuel pump mounting plate to tank are just 5nm.
Tony, would you mind sharing the total cost of the mods you applied (estimated) since the day you purchased the stock street twin? Great job by the way!!!!!
Wow there have been so many changes and parts on and off that It woul be hard even estimate!
I need to find a version of 8 Ball in the states. What an awesome company! I would use them in a heartbeat. I may have to just wrap my tank. Not sure its worth sending my tank overseas...also, your tank is great!
Thanks Rob
Great video, wheels are spoilers at the moment with the red tape but of course, you've got it covered. Chrome spokes perhaps? You missed the 'big' question out, how many monies?
Thanks Colin, yes I couldn’t wait to get the wheels changed before I put the video out, but that’s coming soon. I didn’t mention money because there is such a wide variance depending on tank, design, type of paint, number of colours etc etc
It would have been nice to have had your side covers repainted at the same time with a similar design if just to remove the "street twin" which looks kind of tacky in my opinion. Overall, that tank looks sharp.
ashveratu Aha, there were other plans for the side covers as you’ll see in the videos coming up.... 😉
Hey tony quck question. Do you know where i can get some spoke wheels for the street twin.? I live in the stastes. That are not yo to overprice
The Triumph ones look decent and are not priced too badly. Outside of that you'd be looking at Kineo, Alpina or Canyon. All make fantastic wheelsets, but they are not a cheap item
Not a fan of the paint job, but that's okay - it's not my bike. It only matters that you like it - and since you do, great job.
Thanks David, yep it’s not going to appeal to everyone , but that’s the point eh? It actually looks a lot brighter in this video than in the flesh. I need to work on my colour grading 😂
Beautiful paint job Tony! Just noticed you e taken off the headlight ears?
Yep, I wasn’t keen on the look of the Motone ones, so switched them out for set from the Street Scrambler
Bloody brilliant Tony. The new color and design work looks awesome. Well done matey.
Cheers, always a nervous wait
This would be so much easier if there were a plug to drain the coolant instead of messing with the hose.
“Drain the coolant”? I’m not sure what you’re getting at
@@mancavemoto The engine oil can be removed by unscrewing the oil drain plug. Why not have a coolant drain plug to let out all the coolant? It would be nice. I don't like messing with the hose.
Oh OK, I see what you mean. I was just confused as I didn’t touch the coolant in the video thats all
@@mancavemoto Oh, sorry. I thought I commented on another video where you let out the coolant. I did use this video to help me remove my street twin's tank, though. I enjoy your channel. Good stuff.
Trusty Halfords ratchet handle! Mine's about 20 years old!
Same here I reckon, never let me down
Your videos have help me hugely over the last year of me owning my street twin!! Massive Thanks Tony!
Fantastic paint scheme ! Niceee!!!
Thanks Lee and no problem. Obviously the wheels don't match now so they need sorting, and the exhaust is getting a change up. Fingers crossed its done for the DGR
Hi Tony, Nice job! I love it...
Cannot wait any longer to see your next step with the new exhausts... Maybe a stunning Triumph VH 2:1?
Talking about that (the VH 2:1 exhaust) was thinking to paint the two heat shields/ panels with ceramic black matte colour, exactly like ZardLab does on its own exhaust... Any opinion?
Thanks!
Hi Gennaro, and thanks. Maybe you should hang on for next weeks video 😉🤫
ok! :)))
Looks great! I plan on swapping my tank (found a good deal on eBay). Did you apply any kind of gasket treatment/sealant when you reinstalled the fuel pump assembly? Is there a suggested torque for the bolts?
Cool, no I just used the stock rubber gasket. I can’t remember the torque setting off hand, but I’ll look it up
Thank you so much for this video. It made swapping my tanks WAY less intimidating. Did it in a few hours.
Tony love your channel but to the paint job, wow, NO!
Each to their own Terry 😀
Excellent video and results. I’m surprised you didn’t have them do the side panels also. Keep up the great content!
Thanks Jack, check out the video after this one and you’ll see why I didn’t have the side panels painted! 😉
Ah ha!! Well played sir! I’m really enjoying your videos. Im going to watch all of them. I’m new to the triumph family and appreciate the knowledge that you share. Cheers!
Looks great Tony well done and a very informative video 👍
Thanks Lee
How do you empty the tank. Beside taking the bike for a spin or siphon the gas? Thanks
Syphoning is the easiest way, I have a simple plastic one with a pump section to get things going.... saves getting a mouthful of petrol!
@@mancavemoto thanks tony
I think it looks great. Really nice design and great colours. You say you're doing the wheels... They certainly need to lose the red rim tape. Too much of a clash.
Thanks Steve, hope you’re well. Yep the wheels were always in the plan, but just putting the videos out one at a time
I'm looking forward to the finished product. I think the whole bike is shaping up fantastically well. You should be really pleased with it, you've done a lovely job.
hollowaysteve Cheers
Love it . Hope to see it on the North Essex Roads ....
I’m sure you will Norm
Lovely! And a very interesting video also. 😎
Thanks John
that red on the rims how can we get rid of it? :)
Not easily, either paint or powder coat the whole wheel, maybe have a pinstriper go over the top, or maybe perhaps some rim tape?
That’s a really distinguished design 👌
Why thank you sir!
I'm sure not cheap but how much would it cost to have that design done by 8-Ball? I'm wondering if I can find a local body shop that can customise a tank.
Hi Roger, probably not as expensive as you think. As an indicator a single colour would set you back about £250. If the design isn’t too complex thats not going to jump up excessively. There will be cheaper options out there for sure, but the quality and service 8 Ball offer make it worth it in my eyes. Give em a call, an estimate will cost you nothing....
@@mancavemoto yes that's not unreasonable at all. I think this is a job I can get done over the winter break...now to think of a design...I like your blue design...retro
And I think sometimes that is the problem, people see the name and just assume it’s expensive, and its not always the case. If you get to see the paint job in the flesh, it looks much better than i captured on the video.
They can help with the design too...
Another excellent video, thanks
No problem
Great vid Tony & really suits your bike 👍🏻
Cheers Cotti, how are things with you?
Views from the Man Cave All good cheers, off to the Sammy Miller museum 2moro 😀
options 4 : wrap it with vinyl !
Indeed Denis, but if I were to be pedantic that’s not a paint job 😉 Actually I did look at that, but because the tank had decals on it, under a clear coat, it would be still quite a bit of work to flat it, remove the decals and feather in before applying the wrap.
Those colours look great Tony 😍
Cheers Drew
Price?
Phone them and ask for a quote, bespoke paint jobs will always vary quite a bit
@@mancavemoto thanks, and done. I need a suggestion (and you're the first one that come in my mind when talking about custom!)
Long story short is... I got my tank damaged and scratched, insurance refuse to pay the damage THEY did, and now I have an expensive unexpected bill to pay (fumes, considering I have a street twin with black matte paint, which I love).
So my options are either pay for the respray in the factory, and get it back as it were, or make it completely new and customized.
Do you think a customization will raise the resell value?
Third option.. paint it myself, low budget but no guarantee of the result. Is it messy to repaint a tank?
Thanks!
Excelente 😮
Tank looks smick mam ✌
Cmeers!
very nice mate makes the bike look very different but nicer
Thanks Geoff, always a worry until you see it ‘in the flesh’
I bet it was ,are you planning on doing anything with the red on the wheels
at first I thought it would look better if the wheels were all black but the more you look at it the red goes with it
obviously I don't read the other comments before I post ha
Haha, yep the wheels are next on the list
Very interesting 👍
Thank you
Nice Tony 👍
Cheers Cloggsy