HOW TO BUILD A CONCRETE OUTDOOR KITCHEN / GRILLING STATION | OUR BACKYARD MAKEOVER (PART 3)
Вставка
- Опубліковано 24 кві 2022
- FOLLOW ALONG ON OUR DIY BACKYARD MAKEOVER! OVER THE NEXT FEW WEEKS, WE WILL BE TRANSFORMING OUR PATIO SLAB INTO A WELCOMING, MODERN AREA ON A BUDGET.
WE WILL BE EXTENDING OUR BACKYARD TO INSTALL FLOOR TILES AND BUILDING A MODERN PERGOLA AS WELL AS BUILDING AN OUTDOOR KITCHEN.
IN THIS VIDEO, YOU WILL SEE A DIY TUTORIAL ON HOW TO BUILD AN OUTDOOR KITCHEN / GRILLING AREA WITH A SINK FROM START TO FINISH. THIS CINDER BLOCK KITCHEN IS FULLY ADJUSTABLE TO MEET YOUR AVAILABLE AREA!
TAG US ON INSTAGRAM IF YOU RECREATE
/ jesusadrypdrn
MATERIALS USED
• CONCRETE BLOCK (8 X 8 X 16): www.lowes.com/pd/Common-8-in-...
• CONCRETE BLOCK (4 X 8 X 16): www.lowes.com/pd/Midwest-Prod...
• HALF CONCRETE BLOCK (8 X 4 X 16): www.lowes.com/pd/Common-8-in-...
• PRESSURE TREATED WOOD (2 X 4 X 10): www.lowes.com/pd/Severe-Weath...
• QUIKRETE CONCRETE MIX: www.lowes.com/pd/QUIKRETE-50-...
• TYPE S MORTAR MIX (STUCCO): www.homedepot.com/p/SAKRETE-6...
• CONSTRUCTION ADHESIVE: www.homedepot.com/p/Loctite-P...
• ANGLE GRINDER: www.harborfreight.com/power-t...
• DIAMOND BLADE FOR GRINDER
• MITER SAW: amzn.to/39WcKW9
• RECIPROCATING SAW: www.amazon.com/RYOBI-18-Volt-...
• WOOD SCREWS: www.walmart.com/ip/Deck-Plus-...
• CONCRETE ANCHORS: www.lowes.com/pd/Tapcon-75-Pa...
• SQUARE: www.lowes.com/pd/Swanson-Tool...
• BRICK TROWEL: www.homedepot.com/p/Anvil-7-i...
• FINISHING TROWEL: www.homedepot.com/p/Anvil-12-...
• MAGNESIUM FLOAT: www.homedepot.com/p/Husky-16-...
• WOOD FLOAT: www.homedepot.com/p/Anvil-14-...
• LEVEL
• MEAUSURING TAPE
• MALLET
HELPFUL RENDERING VIDEOS
• How To Render - DIY At...
• LEARN HOW TO RENDER (s...
• How To Render A Wall |...
LAST VIDEO: • DIY ATTACHED MODERN PE...
MAKE SURE YOU LIKE, COMMENT, SHARE, & SUBSCRIBE TO OUR UA-cam CHANNEL AND FOLLOW US ON OUR NEXT DIY PROJECT
DISCLAIMER: WE ARE NOT PROFESSIONALS AND ALL OF THE OPINIONS IN THIS VIDEO ARE OUR OWN! WE WILL ALWAYS STATE WHEN A VIDEO IS SPONSORED AND IF WE HAVE PARTNERED WITH A BRAND. WE DO EARN A SMALL COMMISSION IF SOME OF OUR CODES / LINKS ARE USED. THANK YOU SUPPORTING US SO THAT WE CAN CONTINUE TO PROVIDE YOU WITH FREE CONTENT EACH WEEK!
#HANDYCREATORS #diykitchen #diykitchenmakeover #howtobuild #diybuild #diytutorial #diytutorials
SOCIAL MEDIA:
INSTAGRAM: JESUSADRYPDRN
TIKTOK: HANDYCREATORSCO
EMAIL: HANDYCREATORSCO@GMAIL.COM
ALL RIGHTS RESERVED © 2022, HANDY CREATORS
Smooth finish, has 3 steps
Thank you so much 🙏🏼
You Guys work together and did a great job and Had fun doing it with a feel of accomplishment.
We truly were ! It feels great to step back and see all you worked hard for come to life.
It looks really good. The creativity is admirable.
Thank you!!! 🤗
That look great! I would cut in a vent in the back in the area that you have your propane so that any gases can escape. That way you don’t have any accidents. Great job though!!
Thank you so very much 🥰🥰 yes, we will be definitely opening some vents in the back to help with airflow . Thank you so much for the advice, we truly appreciate it!
Hell of a project! I ended up doing brick tile around my grill myself and did most of it. Stucco is hard without a good float.
Makes you appreciate the people who do this like artwork
Thank you so much!! People who do this for living definitely deserve so much more credit ! It really is an art. We hope you loved the outcome of your project 🙏🏻
you guys are awesome!! love your videos !!!
Thank you sooo much! 🙏🏻🙏🏻
Aaaaaaaaa!!! It’s coming out so nice !!!!!!
Thank you! 🥰 you guys have to come soon! Pero it’s still a mess 🤭
So nice!!
Thank you!! 😊
Thank you so much for your video:) am thinking about making something like this for our outdoor area:)
You should!! It’s been a great addition to our home. We don’t use it as much as we’d like, but working on spending more time out there!
You both are adorable ❤
Thank you so much for your kindness 🙏🏻
Buen trabajo
Muchas gracias!
“Jesus is always the one to make an idea come to life”
Amen
😂👏🏻
Great video! Have you heard of ConnecTubes? You can build a real steel frame without welding. The system is super cheap and uses steel couplers and 1.5 x 1.5" square galvanized steel tubing. Highly recommend you learn about this building product to use for bbq frames etc... The price is comparable to track and studs. They even have telescoping cutout kits for less cutting.
Reply
Oh wow thank you very much! When we were researching to do this project, we did not come across this. We will definitely keep it in mind for future projects. We are very glad you enjoyed the video and thank you for the tips!
Very nice I'm going to be doing one soon. Now the only thing missing is a water feature or pond. Trust me you'll never go without one again lol...
Thank you! 😁😁 lol! That’s something to take into consideration 😈
@@TheHandyCreators with your guys skill that would be no problem weekend job. Keep it up great content.
I like the look of the brick without stucco plus I want to save money
That is definitely an option. That’s the best part of building it yourself. You can make it your own!
Smooth with wet sponge
Thanks for the tip!
I think its coming out beautifully. But I know less than you. Still if you want it smooth, would adding tiles to the outside work?
Thank you so much 😊 yes you definitely can add tiles! We plan on maybe doing that in the future if we decide to change the look. We didn’t do it now since it is very pricey .. 🙁
Is the first layer level or does it slope with the concrete slab? I didn’t see you guys cut any block so was curious about the approach.
Hey! We added concrete mix to the bottom of the first layer and used that to make sure that it was leveled instead of sloping with the slab. By doing this, we avoided having to make any cuts
Great job, team work!
Where did you get the plans to do this?
We basically sketched it up ourselves and watched a lot of other UA-cam videos as inspiration!
This is amazing yooooo😍😍. How much did you spend if I may ask
Thank you!! 🙈 the total of the whole kitchen was around $1000 without the appliances
Sweet !! Couldn't you have put the sink on the opposite side ? To avoid all of the cutting and extra work ...
Thank you!!! Yes, we definitely could of, but for plumbing purposes the location we decided to use was most convenient. We were going to add WAYY more work if we decided to put it on the other side.
Para que los bloques esten fuerte debe tener un cuantas barrillas Alta asi se amaran y a los boquesun poco de cenmento por dentro me gustas sus ideas pero para trabajar mas seguro que lis bloquez no se caiga se deden de pegar con cemento Dios los bendiga siempre muy bonito que trabajen juntos que Viva el AMOR
Muchas graciassss ! 🙏🏻 agredecemos su consejo!
Wondering what you used as a base for your concrete countertops? Is plywood then the rebar?
For the base we used Sheetrock before pouring the concrete countertops. We personally did not use rebar but you can for more durability
Can you do my backyard?lol
Lol! Hey, we’re always opened to new challenges! 😆
Any cracks on the cinderblock structure since you didn't use rebar??
There has been no signs of cracks on any side to date, the structure has held beautifully
How did you connect the plumbing for the sink?
We connected it to an existing plumbing system already previously installed. Thank you so much for your support
Vertical shutters to buy more space?
It truly all turned out great 🙏🏻
Brother it looks amazing, but its alot of work! you could of just built a frame with wood and installed hardyboards all around it and just tile over. much easier! but great job!
Lol thank you man! yeah, we get that a lot. The wooden design was a concept we thought about before we started building, but the blocks ended up being cheaper. We have thought about upgrading it and will probably go with a wooden design in the future.
Side note. You didn't use a single brick. Concrete is not used to lay blocks. It is mortar.
Noted, thank you for your feedback
Jesus...how much did it cost to build this outdoor kitchen ?!🧐
The total cost was around $1000 without the appliances.
Hello yo nunca dije naaa😅
Haha!! Si tu dijistes Que no estábas arreglada! 😂😂
excellent video !! just dont call him Jesus ! sound weird , dile Jesus !! se escucha mejor !
Thank youuuu so much! 🙏🏻🙏🏻 haha! I know, I get that all the time. I’ve been calling him Jesus since the day we met, it’s a habit at this point lol
Since when did we start calling people Jesus? #weird
Since that is the correct pronunciation 🙃#itsnotthatdeep
Your suppose to give a first coat called scratch with wash plaster sand cement after you let the scratch dry for the day and it cracks what it’s suppose to then you apply your stucco the next day but yeah looked nice still
Thank you so much for the pointers!! It’s definitely something that we will keep in mind for future projects!! We truly appreciate your feedback