Hi Martin. Thank you for yet another great and honest review of our products. Regarding that evaluation period a fix has already been deployed. When using the Sense innstallation flow in the App the evaluation period will be set according to main fuse size. If main fuse is 25 Amps or less you will get the new faster reacting (10 min) evaluation period and a little bit of averaing added to not let very short power spikes stop or reduce the charging for significant time. Regarding the offline behaviour, we are currently looking into a fix for it . Best regards Atle
@@hotdogsoup-nl Hi again Martin, we have now gone live with the new offline behaviour fix. This new behaviour is mainly for innstallation with a main fuse of 25 A or less. It should detect that it is offline after 10 to 20 minutes. (PS some more work is needed on frontend / App side)
Thanks Martin, good stuff. I was planning to install the Zaptec go soon (since I have the homewizard setup and 8kw of solar panels) - I just read that a Zaptec go 2 is to be released in Q4 which will feature dynamic fase switching. Might wait for this one in combination with the sense module.👍 oh, and it will feature V2G as well!
@@hotdogsoup-nlHalf november it should be available in the Netherlands. No price indication available yet. I am also waiting for this model. My wallbox Pulsar+ is dead. 😢 So I need a replacement.
I installed sense yesterday (the old p1 with more devices) And did the same test and my charging ”paused” I waited a long time but it did not start. My Installation process was a pain, low wifi signal etc even if it should be more than fine. Fun te se this video only one day after my ”frustration about the same issue”
Ik heb een 1 fase auto, L1 op L3 gezet omdat ik daar meer ruimte heb. Als er op fase 1 teveel afgenomen wordt, knijpt hij alsnog mijn auto op fase 3. Waardeloos systeem.
Klopt maar dat komt niet door de Zaptec sense. De Zaptec Go kan niet op verschillende fasen balanceren. Daarvoor moet je de Zaptec Pro hebben of de Zaptec Go 2.
Hi Martin. Thank you for yet another great and honest review of our products. Regarding that evaluation period a fix has already been deployed. When using the Sense innstallation flow in the App the evaluation period will be set according to main fuse size. If main fuse is 25 Amps or less you will get the new faster reacting (10 min) evaluation period and a little bit of averaing added to not let very short power spikes stop or reduce the charging for significant time. Regarding the offline behaviour, we are currently looking into a fix for it . Best regards Atle
thank you that is amazing!
@@hotdogsoup-nl Hi again Martin, we have now gone live with the new offline behaviour fix. This new behaviour is mainly for innstallation with a main fuse of 25 A or less. It should detect that it is offline after 10 to 20 minutes. (PS some more work is needed on frontend / App side)
@atleundrum4799 thanks I’ll test it in the coming weeks 😀
Yes, it works correctly now! :)
Thanks Martin, good stuff. I was planning to install the Zaptec go soon (since I have the homewizard setup and 8kw of solar panels) - I just read that a Zaptec go 2 is to be released in Q4 which will feature dynamic fase switching. Might wait for this one in combination with the sense module.👍 oh, and it will feature V2G as well!
Sounds interesting, I did not know that. I may have to review it 😀
@@hotdogsoup-nlHalf november it should be available in the Netherlands. No price indication available yet.
I am also waiting for this model. My wallbox Pulsar+ is dead. 😢 So I need a replacement.
@bshogeman I’ve heard it has been postponed to next year, but it’s definitely coming.
Q1 2025 apparently now. Will work seamlessly with their P1 sensor.
Bedankt voor de informatie!
I installed sense yesterday (the old p1 with more devices) And did the same test and my charging ”paused” I waited a long time but it did not start. My Installation process was a pain, low wifi signal etc even if it should be more than fine. Fun te se this video only one day after my ”frustration about the same issue”
Contact Zaptec support they are very helpful and fixed my issues :)
Great video! Not so great software from Zaptec! Strange😵💫
Lets balance some loads. Or subscribe!
Ik heb een 1 fase auto, L1 op L3 gezet omdat ik daar meer ruimte heb. Als er op fase 1 teveel afgenomen wordt, knijpt hij alsnog mijn auto op fase 3. Waardeloos systeem.
En momenteel werkt de sense bijna niet meer dan wel
Klopt maar dat komt niet door de Zaptec sense. De Zaptec Go kan niet op verschillende fasen balanceren. Daarvoor moet je de Zaptec Pro hebben of de Zaptec Go 2.
@@hotdogsoup-nl Ja dat is jammer. De sense heeft hier maar 1 keer in de paar minuten verbinding, Was eerst niet zo. Vreemd
And still no solar charging so with sunpanels its a no go
En nu werkt alles goed ?????
Ja alles werkt goed
Dus nu wel zonder problemen load balanceren heb hier 23 zonpanelen liggen vandaar toppy Thanks Pro
@Frits-tl9en ja gaat prima!
Dus al me opbrengst van me zonnepanelen gaat nu me auto in dus full green laden ??
@Frits-tl9en nee daar zorgt dit apparaat niet voor. Dit is een load balancer.
1st comment!
whohoo awesome!