@@TheEnginesOfRoblox possibly to get the older fans attention aswell as the newer fans to then show the kids watching the show that if his toy is bad then his character is bad aswell and so people won't want a faulty model and they won't want anything to do with him in the show also due to his lack of appearances (that's what I think anyway but I could be wrong)
I have a way to fix this . Chop the tender buffers off and sand the bottom of the engine chassis . Fixed both issues . Oh and paint them buffers black whilst at it .
For the curves thing, it’s not made to use *those* radius turns, as those are the original smaller ones from Trackmaster Revolution. That type wasn’t rereleased for Motorized (Except for the sets they were used in were rereleased), they were replaced with a standardized new radius curve that is wider. So I wouldn’t call the buffer bashing thing a huge issue. Okay, it’s weird how Gordon can make it past with his wider buffers, but if they don’t collide on the current track then it’s not a huge matter. You could go onto the Mattel help store thing to report this faulty design.
AEG push along Edward looks nice, but man, the chassis could have been a bit better if he was running and pushing smoothly. Overall, it's a really nice model, awesome wheel configuration, and in some ways, it's better than the original.
I did not notice this with my push along Edward. He was my 2nd AEG push along (Toby being the first) so I didn't know if James, Gordon, Hiro and Yong Bao were like that. I also found Edward abandoned in a parking lot with no tender in sight, so I can't say anything about the rear buffers acting with the tender's front buffers.
He's not the only one because i think Kinji also have the same issue because i seen a video about he can't go down the hill in the race for the sodor cup set
Pretty sure Kenji is alright I think. He works on my RFTSC set perfectly fine lol Bruno doesn't work on inclines though, for some reason, he sits too low, so it interferes with his performance lol
Honestly, (no offense to you @RailwayGWR) I wouldn’t really care if Edward goes slow, Edward is a really nice push along and goodly detailed. And you can use the tracks that were made in the Super Station Set.
Yeah, Mattel really did give us the middle finger when it came to Edward. Like seriously, why did they do that?!?! For all those Mattel fans who love the push along all engines go engines and especially who love Edward, I'm sorry aesthetic wise he's awesome, but functionally, it's bad I'm going to be honest and say this I don't know the hell Edward and Henry did to Mattel to make Mattel hate them and do this to them as a message Mattel is just a big mean bully to both Edward and Henry who are really important Railway Series characters by the way. Henry is lucky because has a great new motorized engine and a push along that mechanically works perfectly But Edward I don't know what Mattel has against Edward because they're letting Henry off on a good hook but Edward I don't know what they're doing to him that made him deserve this. To put it all together I have the push long Edward I got him 3 months ago and at the time I thought it was the best one ever but then after seeing this I looked back at him and I was like what have they done to you Eddie?!?! To sum it up push along Edward is an amazing model aesthetic wise but functionally he's bad and this is so annoying to me because not only I can't play with him separately because he doesn't function right but this also means every time original or all engines go I'll have to grab a motorized engine couple him up and that engine whoever it is original or all engines go is just going to be dragging him the whole time like I know you're old Eddie but you're not that old that you can't function on your own I don't know why they made that decision it's truly a bad design and something that didn't need to happen and that needed to stay behind closed doors of Mattel's stupidest ideas never be brought up again. Seriously, what is it with Mattel doing Henry better now but not for Edward? You know you could do both of them to make the fans happy again, no?? Oh that's right we're trying to create a new better design for the push along engines and Edward is going to be our guinea pig cuz he's the old one nobody cares about news flash we completely love him and which idiot thought that was logical!!!!
Bruno and Thomas adventures Merlin have same problem Obviously the base thing is for safety, sure we'd rather have a thick plastic base where it slightly catches on the rails than have a flat base that is easily broken and kids get hurt from the axles or something
Why did they make it? They clearly dont think oids will pmay with these on tracks. "Only thomas had adventures" no sets with Edward in it. This is especially annoying if you use track, i dont collect AEG but i display them on track. Thats noticable too
Mattel: "Edward, you can look good, but you can't run good."
The funniest part of this is that old trackmaster solved this with specially bent axles
They reused the smoke box from James and the cab roof from Gordon. The Henry is just a slightly modified Gordon.
It’s Adventures Merlin all over again.
What Happened With Him?
Not again. i don't want to deal with that issue again.
Fellas . Time to get out the sandpaper and hand files
Yeah it sucks the push-along was even better
Clearly, Mattel did not play test this model very thoroughly
I think they did it just to deter people from buying Edward in favour of engines like Thomas, Percy, diesel, kana and gordon
then why would they make edward anyways?
@@TheEnginesOfRoblox possibly to get the older fans attention aswell as the newer fans to then show the kids watching the show that if his toy is bad then his character is bad aswell and so people won't want a faulty model and they won't want anything to do with him in the show also due to his lack of appearances (that's what I think anyway but I could be wrong)
Or maybe Mattel despises Edward So They Made Him Badly to piss off edward fans
Mattel always hates Eddie
I knew it feel too good 😭😭💀
I have a way to fix this . Chop the tender buffers off and sand the bottom of the engine chassis . Fixed both issues . Oh and paint them buffers black whilst at it .
Fixed edwsrd problem
Edward, Eddie my boy, please finally speak, I need to hear your voice 😭😭😭
Poor Edward. He deserves Better.
Aye, Atleast they turned him into a 4-4-0 hopefully they change it in the show too, HE'S A LITERAL 6-6-0
Someone in design Extremely hate Edward .....
I really don’t care if theirs interference I just wanna get a edward
At least he has his original wheel arrangement
I would just get the locomotive just to finish up a custom orange Chinese tender locomotive I've been working on
More proof that Mattel hate Edward /lhj
MHE you mean
@@chrishaushalter6983 who's MHE? /Genq
For the curves thing, it’s not made to use *those* radius turns, as those are the original smaller ones from Trackmaster Revolution. That type wasn’t rereleased for Motorized (Except for the sets they were used in were rereleased), they were replaced with a standardized new radius curve that is wider. So I wouldn’t call the buffer bashing thing a huge issue.
Okay, it’s weird how Gordon can make it past with his wider buffers, but if they don’t collide on the current track then it’s not a huge matter. You could go onto the Mattel help store thing to report this faulty design.
That's one of the the only design flaws of Push Along Edward that bugs me alot because of the chassis design and I hated the way it rolls on the track
AEG push along Edward looks nice, but man, the chassis could have been a bit better if he was running and pushing smoothly. Overall, it's a really nice model, awesome wheel configuration, and in some ways, it's better than the original.
They should’ve just made the chassis flat
Yet another example of Mattel not caring about Edward.
I did not notice this with my push along Edward. He was my 2nd AEG push along (Toby being the first) so I didn't know if James, Gordon, Hiro and Yong Bao were like that. I also found Edward abandoned in a parking lot with no tender in sight, so I can't say anything about the rear buffers acting with the tender's front buffers.
Shouldn't you just sand down the chassis part then cut of the buffers?
I've Got Him Now, and He Runs Better on Super Station Track. But his Buffers from his cab and Tender do effect him a bit
LUNA CAMEO LETSSSS GOOOO!!! 🐈⬛🐈⬛🐈⬛🐱🐱🐱
He's not the only one because i think Kinji also have the same issue because i seen a video about he can't go down the hill in the race for the sodor cup set
Pretty sure Kenji is alright I think. He works on my RFTSC set perfectly fine lol
Bruno doesn't work on inclines though, for some reason, he sits too low, so it interferes with his performance lol
@allenginesgofan101iambeing4 from what I've seen, this problem also applies to ferona, frederico, riff, and giff
You can just use super station track and sand the stuff down and remove the buffers
Idea: maybe try switching the his cassie with the James one
They made Edward feel like the odd one out
Mattel Really Gave Us The Middle Finger For Edward
Honestly, (no offense to you @RailwayGWR) I wouldn’t really care if Edward goes slow, Edward is a really nice push along and goodly detailed. And you can use the tracks that were made in the Super Station Set.
It’s clear that this was not play tested enough
Time to get the sand paper out for the chassis fellas . It’s Merlin’s adventures model all over again yall !
Yeah, Mattel really did give us the middle finger when it came to Edward. Like seriously, why did they do that?!?! For all those Mattel fans who love the push along all engines go engines and especially who love Edward, I'm sorry aesthetic wise he's awesome, but functionally, it's bad I'm going to be honest and say this I don't know the hell Edward and Henry did to Mattel to make Mattel hate them and do this to them as a message Mattel is just a big mean bully to both Edward and Henry who are really important Railway Series characters by the way. Henry is lucky because has a great new motorized engine and a push along that mechanically works perfectly But Edward I don't know what Mattel has against Edward because they're letting Henry off on a good hook but Edward I don't know what they're doing to him that made him deserve this. To put it all together I have the push long Edward I got him 3 months ago and at the time I thought it was the best one ever but then after seeing this I looked back at him and I was like what have they done to you Eddie?!?! To sum it up push along Edward is an amazing model aesthetic wise but functionally he's bad and this is so annoying to me because not only I can't play with him separately because he doesn't function right but this also means every time original or all engines go I'll have to grab a motorized engine couple him up and that engine whoever it is original or all engines go is just going to be dragging him the whole time like I know you're old Eddie but you're not that old that you can't function on your own I don't know why they made that decision it's truly a bad design and something that didn't need to happen and that needed to stay behind closed doors of Mattel's stupidest ideas never be brought up again. Seriously, what is it with Mattel doing Henry better now but not for Edward? You know you could do both of them to make the fans happy again, no?? Oh that's right we're trying to create a new better design for the push along engines and Edward is going to be our guinea pig cuz he's the old one nobody cares about news flash we completely love him and which idiot thought that was logical!!!!
The same problem is with my copy of AEG Edward, but i don't complain with that.
2:54 is that a rainbow truck
Looks like I’m keeping mine in his box 😭😭😭
Damn they just keep nerfing Edward
It is intensely annoying knowing that everyone else but Eddie work. Did they test this or do you think they just wanted to pump out product fast
Tgey would just pump Edward out They don't care enough for Edward
I never seemed to have had a problem with that Edward on the older trackmaster and plarail track, as they have less tighter curves.
that's also a problem with the Kenji Aswell
Nothing a bit of sandpaper cant fix
Fr
Clearly they haven’t learned from Adventures Merlin.
I would be irritated with that issue
Oh that's not Just a Problem with Edward
That is also a problem with whiff and ashima
Bruno and Thomas adventures Merlin have same problem
Obviously the base thing is for safety, sure we'd rather have a thick plastic base where it slightly catches on the rails than have a flat base that is easily broken and kids get hurt from the axles or something
I have bruno and he actually runs fairly well
@@Jediah-s6p on like slight inclines though, he snags up
Maybe it’s just your Edward.
Why did they make it? They clearly dont think oids will pmay with these on tracks. "Only thomas had adventures" no sets with Edward in it. This is especially annoying if you use track, i dont collect AEG but i display them on track. Thats noticable too
I knew it was too good to be true
Just cut off the buffers and sand down the chassis
They have done This with the adventures Merlin
Yeah it barely rolls
Don’t trust Mattel to make quality toys
Can’t you just change the wheels?
Wow. Mattel can't make a Diecast engine work properly. That's real a shame.
Really
Is it even worth to buy AEG toys, I don't rlly like the show, but the merchandise is okay
So there's a problem with this model 0:44
Naaaah really??? , I couldn’t have guessed
@@PerpIsPerp What do you mean
Youre asking the most obvious question dude@@DennisLora2001
@@Jediah-s6p Okay I get it please can we just try not to start an argument about this I don't want to get a headache
@@DennisLora2001 ok
Kinda irionic since the same i onky cared for PA james and percy and when edward came i wasnt that excited
I change my comment so it will look werid bc they will be talking about something not here anymore
Actually emily was the first with 4 guide wheels
But Edward has the correct wheel arrangement unlike his previous PA model
Technically, Kana was the first with 2 guide wheels
@@allenginesgofan101iambeing4 as a tender engine
Everyone is rlly talking about something I edited 💀
Sue Mattel
I dare you to modify it
Well duh it's aeg
Adventures Merlin has the same issue, so your point?
@@allenginesgofan101iambeing4 adventures sucks
If you hate mattel
👇
No like begging allowed in this channel