This is a phase shift oscillator. The 3 capacitors and the resistors at their junctions form a phase shift of 180°. The collector is coupled back to the base via this cap-res network and thus the circuit starts to oscillate. The 1M resistor is for biassing the transistor. The potmeter has 2 functions, first to adjust 1 of the cap-res network and second to adjust the emitter current. The leds are opposite because one set is connected to the base and the other to the collector
@@MrGigglesGalore that steady hand to only use one griper while it suspended. I am new to soldering and struggle with this type of project. This video makes it look. easy
Seandainya potensio diganti LDR, kemudian rangkaian ini ditaruh dibelakang motor/mobil maka bila ada cahaya dari belakang akan memberikan efek nyala lampu yang bervariasi secara otomatis..cmiiw
sir i want to learn circuits, but i dont know where to start ?, what are the formulas are important for creating or modifying the existing circuits? please help me sir, thanks in advance!
This is a phase shift oscillator. The 3 capacitors and the resistors at their junctions form a phase shift of 180°.
The collector is coupled back to the base via this cap-res network and thus the circuit starts to oscillate.
The 1M resistor is for biassing the transistor.
The potmeter has 2 functions, first to adjust 1 of the cap-res network and second to adjust the emitter current.
The leds are opposite because one set is connected to the base and the other to the collector
Thank you for the complete explanation of this circuit. I will pin your comment.
Your work is the best so far
Thanks bro
woow . Oh My God😲
Good Electronic Project👌
💛🌼
WHY? NO QUESTIONS?? CAN I ASK YOU QUESTIONS ABOUT IT/ OR IT IS A FAKE COMMENT
LMAO
this is a joke.
no explanation, no details, poor specs, no parameters, terrible construction and poor soldering
LMAO
this is a joke.
no explanation, no details, poor specs, no parameters, terrible construction and poor soldering
Good idea to make this project, i Will buy pieces and make it
My Love Your Soldering
Thank You bro
WHY? IT IS ACTUALLY NOT GOOD
Have you ever made a Marble mazes track. your ability to connect all these components without extra hands on these is amazing.
🤣👍
Single handedly?? He's using a holder!!!
@@MrGigglesGalore that steady hand to only use one griper while it suspended. I am new to soldering and struggle with this type of project. This video makes it look. easy
Seandainya potensio diganti LDR, kemudian rangkaian ini ditaruh dibelakang motor/mobil maka bila ada cahaya dari belakang akan memberikan efek nyala lampu yang bervariasi secara otomatis..cmiiw
@@manangagussunarto5385 Your idea is very useful. Thank you.
සුපිරි
can i use 5k potentiometer instead of 10k?
Yes
Hasta cuántos leds aguanta ese circuito?
The same number as you see in the video.
Can I use more led's for this circuit?
Yes bro
LMAO
this is a joke.
no explanation, no details, poor specs, no parameters, terrible construction and poor soldering
What is right: the diagram or the ECB???
Both are correct
minute 5:53 diagram: the transistor picture is wrong. EBC are correct
Okat volume control ekak danne නැතුව බැරිද
WHAT IS THE CURRENT THROUGH THE LEDS
❤🧡💛
WHAT ARE THE ADVANTAGES OF USING A FLI-F-FLOP
- - - - - - - - -WATTAGE FOR RESISTORS??? WHY 50V CAPS??? amperage FOR PSU??? TAPER FOR POT???
Parts used in this video:
-C1815 Transistor 1pcs
-10uf/50v Capacitor 3pcs
-1M ohm Resistor 1pcs
-1K ohm Resistor 1pcs
-4.7K ohm Resistor 2pcs
-2.2K ohm Resistor 1pcs
-220 ohm Resistor 1pcs
-10K ohm Pot
-LED 5mm Blue & Red 6pcs
-Power Supply 12 Volt DC
Lo q muestras en la imagen de presentación no corresponde con el vídeo. ¿Porque engañar?
Speed Controller????? IS THERE A MOTOR???
Buen video bonito efecto
LMAO
this is a joke.
no explanation, no details, poor specs, no parameters, terrible construction and poor soldering
電路圖附號的極性都畫錯，信佢一成都死！
Thank you, dear friend. If there is a mistake, I will correct the diagram.
Zer good ! Beatifol .
NO PARAMETERSS, NO FORMULAS, NO DISCUSSION
sir i want to learn circuits, but i dont know where to start ?, what are the formulas are important for creating or modifying the existing circuits? please help me sir, thanks in advance!
U seem angry 😂
@@A7Xdookie are u happy with this rubbish
Shut please
HORRIBLE CONSTRUCTION
Pls sir keep yours comments for your self you are a mean prs
Perfect
WHY? NO QUESTIONS?? CAN I ASK YOU QUESTIONS ABOUT IT/ OR IT IS A FAKE COMMENT