Thanks for posting. Go Trax Canada 🇨🇦 finally had this wheel in stock . Very reasonable price and installation was straight forward (after watching this video) . The wheel came with tube and new tire installed! Thank you .
I saw the Website and it said the replacement part is for the non motorized tire, the motorized ones out of stock. Can anyone please give me suggestions where to get a back tire? My back tire has horrible treading.
When you put the wheel back on and tighten it up, how freely should it spin? Mine barely spins. Is that normal or should it spin freely like the front wheel?
Should spin freely, check that the round part that goes under the bolt is between the metal frame of the scooter and the wheel, not between the frame and the end of the screw.
Did u end up findings solution? Just changed mine and I’m having the same issue? I made sure that the washer is between the frame and it did help but now a whole lot
i have the same issue as you.. can you please tell me if it's fine? mine also makes that noise with the disc brake and stops.. doesn't free rotate much
I have a rear wheel and motor assembly for a Gotrax G3 and my scooter was stolen! Would love to send this off to someone who can use it for super cheap.
@@Scox61 ok I’m no where near there but I just found a thing on Amazon that looks like it will work for like $15 . My motor still works fine it’s just the tire
This might be a dumb question, is he just showing how to take it off and putting it back on? And why was the connecting thingy not connected once the tire came off and then he plugged it back in? And lastly, is this the same way to take off the rear for the GMAX ultra?
Hello friend, my Gotrax 3 Scooter lowered the rear tire, then when I put the tire on it I got a beep when I turn it on and it does not accelerate, and there is no error on the screen. please help
I have the G4 & have been working on the back tire. If it’s constantly beeping after turning it on, that wire that you connect in the back may not be aligned correctly. There are arrows on both ends of the wires that should be lined up. Mine did the same thing but after lining them up it stopped beeping
Dude, you are a God send. I have a bent rotor and I have been trying to get the wheel out.
I used this just to patch the tube, which worked great. Ran over a staple. Thank you!
Thanks for posting. Go Trax Canada 🇨🇦 finally had this wheel in stock . Very reasonable price and installation was straight forward (after watching this video) . The wheel came with tube and new tire installed! Thank you .
Is it an allen wrench he is using and what size
Thank you for this. I was wondering how I was going to plug the motor back in. This saved a lot of time and sweat! Awesome video!
Where did you find a replacement wheel?
The Gotrax website has a parts section.
I saw the Website and it said the replacement part is for the non motorized tire, the motorized ones out of stock. Can anyone please give me suggestions where to get a back tire? My back tire has horrible treading.
@@isaacpantoja2068 Contact support, they can tell you when one will be in stock or perhaps you can put a backorder on it.
I have tried this and the back wheel will not come off. The washer catches and it’s completely stuck. Anyone with a similar problem?
Same here! Hoping someone knew what to do about it, working on it atm…
@minater247 I had the same issue replacing my inner tube today! Honestly I just had to wiggle it and use more strength, sadly. It was frustrating lol
I had the same problem there is a piece of the metal that wasn’t cut right just grab something that can scrap a bit of the metal off
what size wrench is that
Either they forgot to put a disk on my new wheel orrr ??
When you put the wheel back on and tighten it up, how freely should it spin? Mine barely spins. Is that normal or should it spin freely like the front wheel?
Should spin freely, check that the round part that goes under the bolt is between the metal frame of the scooter and the wheel, not between the frame and the end of the screw.
Did u end up findings solution? Just changed mine and I’m having the same issue? I made sure that the washer is between the frame and it did help but now a whole lot
Yes it’s normal
i have the same issue as you.. can you please tell me if it's fine? mine also makes that noise with the disc brake and stops.. doesn't free rotate much
@@8bit_hero850 it’s normal to not freely spin.
thank you. the rear motor cable was troubling at first!
Would be even better If yall knew where I could order a replacement.
On the Gotrax website :)
The secondary cable came unplugged. Can’t reattach it. That’s zero slack on my wiring
No idea what to do
I have a rear wheel and motor assembly for a Gotrax G3 and my scooter was stolen!
Would love to send this off to someone who can use it for super cheap.
Hey man my rear tire went flat and they are out of stock. Anyway this is still available?
@@adamsmith-ou7hl Yeah, still sitting in my room taking up space! It’s in San Diego
@@Scox61 ok I’m no where near there but I just found a thing on Amazon that looks like it will work for like $15 . My motor still works fine it’s just the tire
@@adamsmith-ou7hl Let me know! The thing is heavy and I’m sure it won’t be cheap to ship, but happy to let it go for $15+ shipping
You are the people's champion.
All lot of youtube scooter owners should watch this one first.
Where are u located
Does anyone know if this will work on the G5? Just got a flat and need to repair it asap
Is possible install a rear suspension on this model scooter Gotrax?
What tools do you need so I can know when I repair my back tire tube
I used a wrench that adjusts to any size, screwdriver with multiple different bits, an allen wrench and lots of patience haha
This might be a dumb question, is he just showing how to take it off and putting it back on? And why was the connecting thingy not connected once the tire came off and then he plugged it back in? And lastly, is this the same way to take off the rear for the GMAX ultra?
The crap thing about my g4 scooter is that u can't take the wheel away from the scooter because its attached to the accelerator cable
You can unplug it as shown in the video
How can I get the complete front tire because I have it completely broken thanks
The Gotrax website has a parts section.
@@AutonomyCentral do you know which allen key to use
Hello friend, my Gotrax 3 Scooter lowered the rear tire, then when I put the tire on it I got a beep when I turn it on and it does not accelerate, and there is no error on the screen. please help
I have the G4 & have been working on the back tire. If it’s constantly beeping after turning it on, that wire that you connect in the back may not be aligned correctly. There are arrows on both ends of the wires that should be lined up. Mine did the same thing but after lining them up it stopped beeping
doesnt work anymore.
Thanks for this video.
Nobody still not taking about the size of the wrench 🤦🏾♂️
size 6/8 wrench
Brother how fo u remove the allen key its too tight
That’s what tf I’m saying!!!
Use a hammer on the wrench.. lol
I had the same issue, took it to my local bike shop who were able to remove it with motorized tools.
Thanks!
Thx bro
Wow what a job going to take a shit and hope I never have to do this
Thanks for not telling me the size nut
Just use a wrench that you can adjust to any size.