HOW TO PUT SPRINGS ON A SOFA - ALO Upholstery
Вставка
- Опубліковано 9 кві 2016
- www.aloupholstery.ca
Subscribe Now For More: / @aloupholstery
Instagram : / alo_upholstery
*OPEN HERE FOR MORE INFO*
21 Bradwick Drive, unit #7 Concord, ON L4T 2T4
416 817 4056
416 781 3499
AloUpholstery@gmail.com
PRODUCTS & TOOLS WE USE:
Nail tack remover: amzn.to/2UzaMxK
Chrome nails: amzn.to/2WEFZ4F
Staple gun: amzn.to/2MM0Dv3
Webbing stretcher: amzn.to/2HMOmaL
Jute webbing: amzn.to/2WHuGse
**The links are affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support! - Навчання та стиль
Wow. That tool where you pull the springs in place is genius. And, it's exactly what I need. I inherited a cheap couch that had this type of spring in plastic holders. They're not properly secured and one popped off it sideways. The strength in the spring is such that I've been trying to figure out how to extend it back so I can slot it in, almost took out an eye when I lost track of what I was doing and got too close to see what was going on. 😬 Going to whip up a tool like this tomorrow and get it sorted.
Thank You! I want to up-cycle two sectional loveseats into one large banquette seat and was afraid that using springs for the seats would be too complicated but now I see that it is not and your use of a lever to pull them is excellent! Cannot wait to see more of your vids.
I love the dedication and quality of your craftsmanship. You rock furniture awesomely. It's natural for you to do a Wonderful skilled job. I admire your work ethics.
alright that custom spring pulling tool was legit. gonna go make one of those right now!
I would definitely buy Custom Made Couch from him. Does s nice .Quality job. I replaced springs on my old couch which.tirned out good but the guy who made my Couch couldn't hit the Side of a barn with Nail Staple gun so many Miss's exposed Nails I added Brackets Glued most of Joints Drill holes used Deck wood Screws now it's solid . By watching this guy he knows what he's doing and Takes pride in his workmanship those traits Getting to be Lost cause in USA. Everything Rush half ass. Enjoyed watching video
you do amazing work plz can you show how to create a sofa bed from old sofa .
not click but having back still standing and just pulling out bad from sofa.
tnq u
I found this video while searching for tips on repairing the couch cushions i currently have. You do a very nice job! I like your custom spring pulling tool!
I would love to get the wire clip gun, but i dont have that much to do. Could you recommend a good hand tool for the job? I need to replace a few springs, and run new wire across all the springs.
Hello! Was the spring stretcher made with a pegboard hook?
where do you buy the springs
formidable usted es un genio gelicidades
Nice,
Can you link the spring bending gun...thx
What gauge spring did you use for the seat
excelente!! trabalho parabéns!!!
QUESTION!!!! I've seen some couch-making videos and they use like. . . . I'm not sure of the name but it looks like some kind of a heavy duty nylon strap. I'm wondering: is there any benefit of using these straps vs springs? Or springs vs straps?
How do you measure how long the springs for the seat need to be?
Also, in the seat, your outside two springs are closer together, is this just to increase supplier in the edge?
Hi what’s the stapler model ?
Thanks bud, very helpful 👍
What is the pneumatic gun that wrapped the copper wire to the springs?
I know that staples are quicker, but why not fix the spring clips with screws?
YOU DO A BEAUTIFUL JOB.
what size staples to use?
How do we choose the spring length
That background music though 🔥👍🏾
2:43 what is the thickness of the springs u use?
Where do buy the springs from
You are teaching me Sir!
Very good!
Thank you!
that was awesome you have inspired me to go on and try and do this
House2Home has instructions and spring length tips that are included with their springs
house2home-us.com/collections/upholstery-springs
I learned a lot from this video.
AI POR QUE
VC NÃO FALA PORTUGUÊS? ???
AMO MUITO O QUE VC FAZ
POREN NÃO ENTENDO O QUE VOCÊ FALA. QUE PENA PRA MIM MUITO TRISTE
MAIS PARABÉNS PELO SEU TRABALHO
good work
What is name this spiring please replie me
muito bom!
nice work........
Hi, how would you measure the spring for a project? I see that you have to stretch the spring, so are they 2 or 3 inchs shorter than the span they have to cover or only 1"? just wondering how i would get a goo spring length for my seat project. thanks
House2Home has instructions and spring length tips that are included with their springs
house2home-us.com/collections/upholstery-springs
hi. can u do a sofa wood frame and what is the good design to easily install foam and to upholster..
Из какого дерева сделан каркас ?
Good job
How do you determine the length of the springs.Thank you!
House2Home has instructions and spring length tips that are included with their springs
house2home-us.com/collections/upholstery-springs
I was wondering where to buy the green plastic coated wire and what it is called?
I have found Edge Wire, but it is short and covered with paper.
Thanks
www.alibaba.com/product-detail/Fixing-wire-paper-plastic-covered-used_746119690.html
I found this Fixing Wire. It comes in 5 sizes: 1.6mm, 1.8mm ,2.0mm ,2.5mm ,2.8mm.
What size do you use for the seat bottom?
Oh I see why we were sinking in the couch. The manufacturer didn’t fasten the spring end clip. When the kids jumped on the couch, the springs became unfastened. Also, our couch had way less springs. Almost half. Finally the steel wire clips loosened. The wooden frame started to crack too. I really need to become a carpenter to fix this couch. 😢
Did you do it
Plz i want pin remover onlin Amazon
hello sir, do you need a seat upholstery master?
Thanks
Who is the best spring for the chair Zig Zag Springs or Spiral spring ?
Zig Zag! House2Home has instructions and spring length tips that are included with their springs
house2home-us.com/collections/upholstery-springs
I'd love to have a job like this! It's amazing!
Stéphanie Pir i like u n your coment
Stéphanie Pir k
Cactus&Salad . Hello
Check my chanal watch Gold Bed video
Hmm
How do you determine the length of the springs and what type of lumber is the frame made of. Thanks nice video
Robert Avery As for springs - Rather than buying pre cut springs of a certain length you can buy a roll which you cut yourself with bolt cutters. E.g. see Heico direct. They also sell 8g and 9g for bottom and 11g for back (some places don’t do 8g). Measure the length between back and front rail and multiply by how many springs you have (can do 4 inch distance rather than 5 if you want more support). Springs will be curved but you also pull them taut so the length between the wood is an accurate guide. That way it’s better to have too much than not enough, and worst case scenario you can give away any remaining length that you won’t use
House2Home has instructions and spring length tips that are included with their springs
house2home-us.com/collections/upholstery-springs
Could you change a chair from coil springs to those type of Springs?
I am a woodworker, but I would like to build my on furniture (couch, love seat, chair, etc.) Can someone please direct me to a website that has the materials and tools/supplies that I can buy to build these with. Thanks
House2Home has instructions and spring length tips that are included with their springs. Plus all the other materials you would need. You can follow us on FB as well. You can always email us with any questions you might have! We are here for you!
house2home-us.com/collections/upholstery-springs
What is the name of this tool that you used to attach this green cord to the spring? and this green cord is what?
vertexfasteners.com/detail/proclinch-4-5
I search for ProClinch and found this which looks like the tool used in the video.
4:01 what is the machine name
Hermoso
do you have a special store you buy all you stuff from to redo furniture
House2Home has instructions and spring length tips that are included with their springs. Plus other supplies your would need!
house2home-us.com/collections/upholstery-springs
AmAzInG!!!!!
And thanks sir
Man I need a manual tool to attach the stay wire clips to the springs - he’s using a pneumatic one with a compressor, the hand tools are like $75, dang I just need to attach one wire. 😢
try repairing those springs when they break...and they will,it's a nightmare job,not for the faint of heart,most folks just throw away the sofa,i've repaired quite a few in my day and it's not easy,esp to do it correctly,so the repair lasts.
I am big fan only for you
Jaik
je veux parler avec vous
Im planning to make own business like this....
IT is my plan too, underway anyway
super
EMIN ABBASOV pin
PRO GOOD!
beauty
5 cm ??
nope, 5 inches. In cm it'll be 12,7cm :)
ggggooooooddddd
Poor back..
It looks crap..