How to Install a Delta® Pulldown Kitchen Faucet
Вставка
- Опубліковано 31 тра 2024
- Mike and Hannah make change simple by showing you how to easily install a Delta® pulldown kitchen faucet in only five steps. This video features the Trinsic™ model, but these steps can be applied to other pulldown kitchen faucets from Delta®. See our supply list and video shortcuts below to make installing even easier.
You'll Need:
- Phillips head screwdriver (Longer length, if available)
- Adjustable wrench
- Safety Glasses
- Flashlight
- Towel
- Pot or Bucket
Steps:
0:00 Intro
1:01 Mounting Faucet
3:12 Connect Supply Lines
4:43 Flush Supply Lines
5:50 Connect Sprayer Hose
Need additional help? Watch these related videos:
How to Replace or Upgrade a Delta® Kitchen Faucet Pull-Down Spray Wand - • How to Replace or Upgr...
How to Uninstall a Kitchen Faucet - • How to Uninstall a Kit...
How to Install a Delta® Kitchen Faucet with Touch2O® Technology - • Video - Навчання та стиль
this is the first video I see in my life, were plumbing fixing/installation is done from start to end
Delta's written installation instructions are HORRIBLE! I will look at these videos and make a hybrid installation, since my Delta Touch2O pull-down kitchen faucet didn't come with the foam piece mentioned early in this video. There is a similar-looking plastic ring, but it's never mentioned in the installation guide. Also the install guide does not even list all the different parts that come with the faucet! They want to save pennies by making 1 installation guide for 25 different faucets. What do expect for $300?
Hello John, Thank you for reaching out. We apologize for the inconvenience you've experienced. Most of our Maintenance and Installation guides are universal and can be used for different faucets including yours. Since the guides can be used for different faucets, all parts mentioned will not apply to your faucet. Again, we apologize for the inconvenience. Feel free to reach back out with any further questions or concerns. -Kelley
Yep instructions are so bad that you don't know if you are missing parts or are supposed to mix and match the instructions with those parts that are included. For example, on page 4 of the instructions, we need and have parts 1 through 6, but don't have the parts for steps 7 and 8. We only have the parts shown on one of the diagrams of the previous page. We bought model #: 19962Z-SSD-DST and plan on returning it to the store. Any company that does this bad doesn't deserve the revenue!
@@deltafaucetDelta, I will NEVER buy your products again after today. Bought your faucet and the instructions are lackluster and HORRIBLE! Make unique instructions for EVERY model.
Not only are their instructions terrible, they got rid of braided steel water supply lines, which were MUCH easier to connect than PEX, but probably cost a few cents more. The tubes come with rubber rings at the end, but they also supply nylon washers and tell you NOT to use the rubber ones! But the nylon ones don't fit and they don't supply instructions or a clear video to explain. Delta used to be so good, but like Boeing, all that seems to matter is the bottom line.
Agreed. Worst instructions I've ever seen. I have parts with my faucet that aren't in this video. They are shown in the manual, but the drawing is terrible and there's nothing written about them. Who knows, but I will never buy another Delta product again.
The instruction say nothing about putting the blue clip over the sprayer connection. We found out by watching the UA-cam video.
It’s there but not in the right order
The instructions that came with faucet have to be the worst I’ve seen with generic equipment with no list of parts and many of the parts in the instructions don’t correspond with the faucet. If they’re not going to give specific instructions and parts list they should at minimum give a QR code or link with specifics. I’ve installed several faucets and this was very easy, but I had to watch the video to understand the parts. You can do better Delta!
Hello Goldwinger, Thanks for contacting us. We apologize for the inconvenience you experienced with your installation guide. Our maintenance and installation guides are universal guides, to be used with multiple faucets. We apologize again for the trouble this may have caused. -Kelley
@@deltafaucet All other faucets brands I’ve bought had specific instructions with a parts list. Is it really that difficult to have model instructions and parts list instructions or a link? I guarantee who have schematics with parts from design engineers.
Good and clear video! The only addition I would add is with braze-on shut-off valves its a good idea to hold the valve body with a wrench while tightening the line. This can prevent stressing the soldered joint.
Thank you for this video. My Delta Trinsic 9159-DST came without a part list and were otherwise very cryptic. The video has different parts than mine but at least shows the concepts which allowed me to eventually figure out the process. Outside the figuring out, this is a 30 minutes install. But the figuring out took me a couple of hours.
Ditto!
Same, spent a half hour trying to figure out why my install did not come with a foam washer at the beginning. Eventually found out mine came with a tiny black washer that the written instructions completely skipped over. Thanks you for the help!
Love Delta faucets, have great success with their products 👌
This video was very helpful 🙏🏼💯👍🏽
You are great person. Thank you for helping.
Great Video, it was a lot easier than I expected. Thanks!
I just bought a new faucet and I can't even do step 1! No foam gasket in the box. I'm not happy
Great! Thanks very much for posting this well put together installation tutorial. Very helpful!
You're welcome! We are happy to help 🖤
Installed the Charmaine model last week and used the 3-hole base plate (three holes in the sink). This model has the same mounting nut for the faucet as shown in the video. I hand-tightened it and then tightened the screws just as demonstrated here but the whole faucet is slightly wobbly. I have no way to do more than hand-tighten the nut, and I'm almost afraid of crimping the base plate if I did. Anyone else have the same issue? Is mounting the faucet on the baseplate instead of directly on the sink just inherently wobbly?
Turns out I just had to go back & hand-tighten it again. That seems to have taken care of the issue, no problemos since.
Well the Mount on my faucet doesn’t look like this and doesn’t seem to glide on so easy. This is frustrating.
Excellent video, very helpful. How to fix dripping water out of Delta faucet? I did replace its cartridge but it continues dripping out of the faucet head. Please advise. Thanks
Great video! Saved my bacon because... Delta had the wrong instructions for my faucet in the box. 🤦♂
Same here!
Mine is leaking from pex line inside faucet how do I fix that
Are you supposed to use the flat round rubber washers that come with pex line
Just installed dunsley 19756z but the weight doesn't retract the sprayer. Most all other companies have the weight attached to the hose. Could this be the problem? The hose isn't touching anything else in the cabinet.
How long are the supply hoses from the faucet?
How do you replace the handle for this kitchen faucet? I have the part RP82233RB. We’ve tried using an Allen wrench and nothing really happens. My husband and I are stuck.
Hello Orit, Thank you for reaching out! We are happy to assist. The
CHARMAINE™ Metal Lever Handle Kit MODEL#: RP82233RB requires an 1/8" Allen wrench to remove the RP72998 screw. If there is build-up holding the screw in place we recommend soaking a towel in a 50/50 solution of white vinegar and water and wrapping around the handle to break down anything holding it in place. If this does not work please send us a private message to better assist. -Kelley
Can it be installed with handle on the left side instead of right?
Thank you for the question! Yes, Delta faucets models where the spout can rotate 360 degrees can be installed with the handle on the opposite side.
-Bryan
My Delta Anderson faucet doesn’t have a parts list, just terrible illustrations and instructions. None of the parts are the same as the video. I wish it was this easy.
Hello Matt, Thanks for reaching out. The ANDERSON™ Pulldown Kitchen Faucet MODEL#: 19998Z-SPSD-DST parts diagram can be found at the link below.
media.deltafaucet.com/PartsDiagram/DPD-K-19998Z-SD-DST%20Rev%20C.pdf
No foam gasket came with my faucet. I took it back and the second one didn’t have it either
I got the WRONG instructions with my faucet. The downloaded ones werent very clear either
Same here, this video helped tremendously.
Mine looks different. There is no foam gasket, no washer, and there’s a weird square plastic piece. The included instructions don’t show all the parts.
Where does it say what size supply valve we need?
Hello Grandpa 82547, Thanks for contacting us, we are happy to assist. The TRINSIC® Single Handle Pull-Down Kitchen Faucet MODEL#: 9159-DST uses the TRINSIC® DIAMOND™ Valve - Euro-Motion - Short Stem MODEL#: RP73000 for models produced after 08/01/2018 or the Euro-Motion DIAMOND Valve MODEL#: RP60114 for models produced before 08/01/2018. -Kelley
Trying to install the faucet using the instruction manual is sooo tedious and time consuming!!!!
We missed the first step about the ring because nothing is clear in the instructions and had to redo everything. Would not recommend going through such an experience
Expect the magnet to rust to pieces in about 2-3 years
There was no foam disk for to make the gasket. 😢 Delta, you can do better! Written instructions were not the best. It appeared that we were missing a few parts, the video made the parts clear as to what we were really looking for. I wish they would cover everything that’s included in the box.
My Anderson came with none of those mounting parts and no instructions.
Hello Chris. Thank you for contacting Delta Faucet Company and we are happy to help. Please send us a private message with your contact information or give us a call for further assistance. -Carrie
“It’s gonna be the same process for every different one” yeah that’s a lie buddy
*THESE INSTRUCTIONS ARE USELESS!*
I purchased a DELTA *19978Z-SS-DST* Pull Down Faucet, then tried to use the video as reference. The parts were all different!
No instructions on removing the existing one. 😏
I look up a video on how to install my delta faucet because the written instructions are so vague your video title says you’re going to demonstrate the faucet I have but you demonstrate a different faucet with different types of parts why would you want to frustrate your customers in such a way thanks for wasting my time and really making me mad
If they only made the fonts big enough to read the dam directions we would not need a dam video.
Nice video. Now tell me how to do this if I have 3 holes. I think I might be able to make the parts fit if I use my Dremel with a sanding drum. Your printed instructions suck! Instead of putting three languages on one sheet, make three sheets. It might cost you another 2 cents to do so, but I paid $180 for this faucet. Another 5 cents to get clear instructions would not lose you a sale. I would suggest hiring an average, non-professional, DIY homeowner to install your products and address their problems. I have been a professional contractor. If I have problems following your instructions, many other people will, too.
The plastic piece that fits over the threaded brass tube doesn't fit over the tube. (Bad production tolerences) I had to sand it out with my Dremel to get it to fit over the tube. You need to get the people who make the two parts together to fix the problem. (Also, send a copy of this faucet to the Delta CEO. Let him try to install it. Make him earn the big bucks.
Written instructions are THE WORST. Best to go with the video although the video shows some different parts (hose weight and white gasket). Also, connect pullout hose BEFORE you turn on faucet to clear out air.
Delta has the worst written directions of any plumbing fixture I've ever installed
Hate Delta direcions.
Completely unusable written instructions and video. My parts are totally different and the foam gasket is missing from my box. The instructions are basically unreadable.