How to Adjust the Brakes on a Rollator

This video explains how to adjust the hand brakes on a Peak Care Ellipse rollator. See below for full transcript of the video.
The following information is designed to assist you with the adjustment of your Peak Care Feather Touch Brake system (as set up on Peak Care Ellipse Rollators)
1. Hand Brake is too loose:
Loosen the tension adjustment screw locking nut and turn the screw on full turn clockwise (as viewed from standing at the back of the Peak Care Ellipse Walker / Rollator). If this does not correct the adjustment, repeat one full turn at a time until you have adjusted your brakes. Make sure the locking nut is spun tight against the housing to prevent the screw from loosening.
2. Hand Brake is too tight:
Loosen the tension adjustment screw locking nut and turn the screw one full turn clockwise (as viewed from standing at the back of the Peak Care Ellipse Walker / Rollator). If this does not correct the adjustment, repeat one full turn at a time until you have adjusted your brakes. Make sure the locking nut is spun tight against the housing to prevent the screw from loosening.
If you would like to arrange for your brakes to be adjusted, please contact our service technician at Patient Handling on 1300 137 875. We are based in Marrickville, Sydney and can provide a quote for the brakes to be adjusted at our store or within the Sydney area.
This product is available at www.patienthandling.com.au