5648 | Laser Tools | Hub Puller Press Kit & Adaptor + Force Screws
Вставка
- Опубліковано 1 вер 2013
- Hub Puller & Driveshaft Remover/Press Kit - Part Number: 5648 - www.lasertools.co.uk/product/5648
Hub Puller Adaptor - PCD 97mm - 123mm: 5649 - www.lasertools.co.uk/product/5649
Impact Force Screw: 5500 - www.lasertools.co.uk/product/5500
Hydraulic Force Screw: 5654 - www.lasertools.co.uk/product/5654 - Авто та транспорт
Wow! These are some seriously heavy duty tools. Thanks!!
Defo need to get myself one of these kits!!
REALLY GOOD DESIGNS
This kit it just too damn pretty.
I have a similar kit. Works effortlessly.
That is a really nice kit
Quality stuff right there
Now that a sweet kit! I want one!
You all prolly dont care at all but does any of you know of a way to log back into an instagram account..?
I somehow lost my login password. I would appreciate any help you can offer me!
@Brentley Ryland instablaster ;)
@Ira Lennon I really appreciate your reply. I got to the site thru google and im in the hacking process atm.
Takes a while so I will get back to you later when my account password hopefully is recovered.
@Ira Lennon it worked and I actually got access to my account again. I'm so happy!
Thanks so much you really help me out :D
@Brentley Ryland Happy to help xD
molybdenum disulfide grease?
Wow good tool
Wow very nice
Wow is good tool i will tel my brain to buy for the shop .
Mine still in the box. Didn't want to get it greasy.
Good good
Ahhh if only it were always that easy lol. If you live in the rust belt, this would not come off nearly this easily. Otherwise, it looks like a great tool.
Nice
Even with the music and narration, this on some ASMR type shit 👍
how much that kit?
Good 🔧
I have had CV shaft ends not come out on a 50 ton press, a new or salvaged knuckle had to be used
Heat
@@wonkeep85 tried that in the press, the press was going to distort the knuckle
Колёсные болты имеют конусную посадку, поэтому под них надо подкладывать толстые шайбы, иначе на приспособлении останутся конусные выдавки от болтов. См. 3.00.
fantastish
What is the bolt at 3:35 pressing against to push out hub assembly? Thinking can't be the drive axle. That would just push into transmission.
At 3:35, the tool is on a rear wheel of a front wheel drive car, so the tool just pushes against the stub axle on the trailing arm rather than a driveshaft. Earlier in the video (around 1:00 on) the tool is used on a front wheel; here, the drive shaft is pushed out of the bearing first then the slide hammer is used to remove the bearing from the upright. If you have any further questions on this please contact are technical team via e-mail - technical@toolconnection.co.uk
He didn't put ear defenders on.
And how to install new bearing?
Как ставить они ещё не придумали.Потом покажут.
, your on your own
Can this tool work on fwd chevy ford's toyota honday in united state
The Laser Tools 5648 Hub Puller Press Kit is suitable for use on front-wheel drive vehicles primarily for removing the driveshaft constant velocity joint from the drive flange and removing Generation 2 wheel bearings.
The drive flange on Generation 1 wheel bearings can be removed but the remaining bearing will still need removing from the hub by various methods.
What about to put the hub back in or install the new one. Can this tool be used to put it in
5648 is just an extraction kit, for installation you would also need a different kit; other kits, like 5582 for example, will remove and install wheel bearings. These are vehicle specific, so we would need to know your vehicle details before we could advise which kit you need. If you can please e-mail our Technical team they will be able to assist - technical@toolconnection.co.uk
When he pulls the hub out, he kinda pauses there holding it like - JOHN THE FUCKIN WAYNE OF HUN REMOVALS.. LIKE MORE WHERE THAT CAME FROM BITCH!!!! WHAT A BADASS!!!!
The music sounds similar to the Knight Rider theme
What vehicles were used in the demonstration?
Skoda Fabia.
How the price this tools? and where can buy too.
All details in the information panel above. If you tell us where you are based, we can find you a stockist.www.lasertools.co.uk/product/5648
£1000! Nice but not that nice😳
That to would not work where I live rust is horrible here
Could not agree more.
👍🏼👍🏼👍🏼✔️✔️✔️👑👑👑💐💐💐💐
Looks really cool, but looks WAAAAAAAYYYYYYY over engineered.
Too much work.