Thanks Darren. I found it with the main components list. Looks like you will give your local highways and town snow clearing equipment a run for their jobs!
Iv been looking forward to this since I found your channel. Very cool! Nice work man. Iv been plowing commercial parking lots since I was pretty young and this is by far the most ingenuity iv seen in a setup like this. I bet you get a lot of looks and thumbs up driving that rig around town
Physically quicker probably but plowing may not be faster for the entire job. You have to go back over a lot of places with a plow because of snow that’s spilled off the clean edge. This this is one pass and done but it is slower. So maybe it’s a wash. Neat machine though.
I'd say you hit a home run on this unit. Seems to work very well. I'm in the process of collecting parts to build one and was wondering if you are completely happy going hydraulic or if you made another would go pto drive off the back motor. just curious as I don't have the hydraulic set up but I do have a complete PTO driven blower to put on the front.... Your thoughts?
Initially I had thought about using a PTO drive. I wanted the blower to be a quick disconnect unit so trying to do that with a pto drive would have been a challenge in my opinion. Another consideration for me was cost. When I weighed the options it seemed that a pto drive would be more expensive. I’m satisfied with the hydraulic drive thus far. One concern I do have is if I were to blow a hose it would be a mighty big mess to clean up.
@@uwpd ok... thanks for the reply. Yes price is definitely a factor and I to was pricing both ways of doing this, when I was given a blower, complete frame and drive trane that will need to be shortened. The frame bolts up to the bottom of a small tractor. This is a chain and gear drive for a rear pto. I think I can make this work with the Chev inline 6 that was also donated in the truck box. But I'm thinking your hydraulic set up would be a lot easier.....hmmm... now ya got me thinking...lol.
@@VikingShipExplorer if you already have all the components for a pto drive that might be the way to go. One down side is you’ll have to give up some ground clearance.
😂 brilliant. I don't know why it took this long for the thought of a truck mounted snowblower to occur to me; I've seen it on tractors and skids ages ago. Oh wait.....I see in the update video you need a whole separate engine in the bed to power that thing 🤯 Still nice work, though.
Northern Hydraulics sold a front mount snowblower about 20 years ago but you could only choose Western or Meyers hookups. As I recall it was powered by a 22 or 24hp engine and it was over $4k. Still wish they sold them.
This is a project that I built myself. The components came from various sources. I’m not sure where you could find something similar in Alaska but I’m sure it would be useful.
Hey buddy. Can u give me more information on the pump and motor ur using on the blower? Type. Brand. Size. What they come off of or new. And if new. Part numbers and brand ?? Thanks. Iam trying to put one on my pickup also
Not sure where that info is at on ur overview. Didn’t see anything. Could u send me motor and pump info so I can purchase the same thing. ?? Or would u recommend a different pump and motor from what u used ??
I’ve posted the link above. The info is listed in the description. There are several variables that go into picking the right components. What worked with my application might not necessarily be a good fit for yours.
@@ronwebb5321 The info is listed in the video description, not in the video itself. Here's the list from the description: Partial Parts List: Hydraulic Pump: Dynamic GP-F25-51-P-C Hydraulic Motor: Eaton Char-Lynn 6000 Series Hydraulic Manifold: AD08P015S/S Hydraulic Valve: Pilot Valve: HD-3C4-G02-DL-B-12VDC Hydraulic Fittings: www.hydraulicsdirect.com Hydraulic Hose: www.DiscountHydraulicHose.com Low Temp Hydraulic Oil: www.buysinopec.com
WOW!! That is such a cool rig!!!-John
Thanks Darren. I found it with the main components list. Looks like you will give your local highways and town snow clearing equipment a run for their jobs!
Thanks Darren, impressive setup u got there.
I think this attachment saves your truck transmission!!!
Congratulations on being the coolest guy in Wisconsin! Nice work!
Iv been looking forward to this since I found your channel. Very cool! Nice work man. Iv been plowing commercial parking lots since I was pretty young and this is by far the most ingenuity iv seen in a setup like this. I bet you get a lot of looks and thumbs up driving that rig around town
Nice set up, would look good all painted orange.
super awesome and happy new year
That works awesome! Really nice set up!
Good build! Moves quick!
WOW!
Looking good, like the drone footage.
Looks great nice work!!!
Nice job sir.
Thanks for the video.
Nine feet of snow in Big Bear Mountain in Southern California got me looking at snow removal equipment .
I imagine that would do it
It's really nice for deep snow, but you can move quicker with a plow
Physically quicker probably but plowing may not be faster for the entire job. You have to go back over a lot of places with a plow because of snow that’s spilled off the clean edge. This this is one pass and done but it is slower.
So maybe it’s a wash. Neat machine though.
this is so bad ass
I'm in love with a machine?
Looks like a nice unit. Can you give us a few details like motor hp, hyd pump and drive motor size, snow blower make and model and so on.
If you take a look at my other videos on this project you will find the info you’re after.
It'll be great for those long narrow Lanes where you got nowhere to put the snow
I'd say you hit a home run on this unit. Seems to work very well. I'm in the process of collecting parts to build one and was wondering if you are completely happy going hydraulic or if you made another would go pto drive off the back motor. just curious as I don't have the hydraulic set up but I do have a complete PTO driven blower to put on the front.... Your thoughts?
Initially I had thought about using a PTO drive. I wanted the blower to be a quick disconnect unit so trying to do that with a pto drive would have been a challenge in my opinion. Another consideration for me was cost. When I weighed the options it seemed that a pto drive would be more expensive.
I’m satisfied with the hydraulic drive thus far. One concern I do have is if I were to blow a hose it would be a mighty big mess to clean up.
@@uwpd ok... thanks for the reply. Yes price is definitely a factor and I to was pricing both ways of doing this, when I was given a blower, complete frame and drive trane that will need to be shortened. The frame bolts up to the bottom of a small tractor. This is a chain and gear drive for a rear pto. I think I can make this work with the Chev inline 6 that was also donated in the truck box. But I'm thinking your hydraulic set up would be a lot easier.....hmmm... now ya got me thinking...lol.
@@VikingShipExplorer if you already have all the components for a pto drive that might be the way to go. One down side is you’ll have to give up some ground clearance.
This is so cool... I've watched most all your videos on it... I'd love to do one myself but most likely won't ever happen
😂 brilliant. I don't know why it took this long for the thought of a truck mounted snowblower to occur to me; I've seen it on tractors and skids ages ago.
Oh wait.....I see in the update video you need a whole separate engine in the bed to power that thing 🤯 Still nice work, though.
Northern Hydraulics sold a front mount snowblower about 20 years ago but you could only choose Western or Meyers hookups. As I recall it was powered by a 22 or 24hp engine and it was over $4k. Still wish they sold them.
Very nice and...اتمنى لك التوفيق من قلبي
متابعك من الاردن..
Looks really good but it seems like it should be running a little faster can you adjust that with a faster pump on the blower unit or pully?
I do plan on adjusting the sprocket ratio
Love the set up and the work u put into it but how does it do with wet heavy snow? And what is the depth it can handle with out it being to much?
Where did you buy this and how do I get one for Alaska.
This is a project that I built myself. The components came from various sources. I’m not sure where you could find something similar in Alaska but I’m sure it would be useful.
Hey buddy. Can u give me more information on the pump and motor ur using on the blower? Type. Brand. Size. What they come off of or new. And if new. Part numbers and brand ?? Thanks. Iam trying to put one on my pickup also
I have the info you requested listed in the description of my project overview video.
What rpm is the 300-6 running at ?
2500-2800
Not sure where that info is at on ur overview. Didn’t see anything. Could u send me motor and pump info so I can purchase the same thing. ?? Or would u recommend a different pump and motor from what u used ??
ua-cam.com/video/rpjFMINRwLo/v-deo.html
I’ve posted the link above. The info is listed in the description. There are several variables that go into picking the right components. What worked with my application might not necessarily be a good fit for yours.
@@uwpd ive watched ur thread many times. U never did give us the exact pump and motor brand and model numbers. They make thousands of pump out there
@@ronwebb5321 The info is listed in the video description, not in the video itself.
Here's the list from the description:
Partial Parts List:
Hydraulic Pump: Dynamic GP-F25-51-P-C
Hydraulic Motor: Eaton Char-Lynn 6000 Series
Hydraulic Manifold: AD08P015S/S
Hydraulic Valve:
Pilot Valve: HD-3C4-G02-DL-B-12VDC
Hydraulic Fittings: www.hydraulicsdirect.com
Hydraulic Hose: www.DiscountHydraulicHose.com
Low Temp Hydraulic Oil: www.buysinopec.com
Sell it to me