Hobbywing EzRun Max10 140A 3665 G3 4000Kv specs and 4-Tec 2.0 Speed run
Вставка
- Опубліковано 12 жов 2024
- I measure the rotor magnets and gauss. Then run it in my 4-Tec 2.0 for the video.
Consider watching:
Tekin Pro4 HD 4300Kv motor rotor quick specs
• Tekin Pro4 HD 4300Kv m...
Hobbywing Quicrun 3660 Motor specs 10BL120 Is it worth replacing a BL-2s in a Traxxas 4-Tec 2.0
• Hobbywing Quicrun 3660...
Inside Traxxas BL-2s motor specs turns measurements and rotor strength gauss reading
• Inside Traxxas BL-2s m...
Traxxas 4-Tec 2.0 BL-2s can it handle max gearing 55T spur 35T pinion?
• Traxxas 4-Tec 2.0 BL-2...
Traxxas BL 2s is not faster than a Titan 12T...initially... But it is still far better
• Traxxas BL 2s is not f...
Traxxas Supra 2.0" 9374 9375 tires on 4-Tec 2.0 review and comparison Best tires for Corvette 3.0
• Traxxas Supra 2.0" 937...
Must upgrades for speed runs and 2s suggestions for Traxxas 4-tec 2.0 3.0 Supra GT4 and Factory Five
• Must upgrades for spee...
Traxxas 4-Tec 2.0 Speedrun Part 1 gear setups for over 60 mph 100kph on 2s Tekin RX8 Pro4 HD 4300kv
• Traxxas 4-Tec 2.0 Spee...
Traxxas 4-Tec 2.0 Speedrun Part 2 math top speed over 60mph 100kmp on 2s? Tekin RX8 HD Pro4 4300kv
• Traxxas 4-Tec 2.0 Spee...
Traxxas 4-Tec 3.0 Speed Runs 3s Hobbywing Max10 ESC 3660 4000Kv motor 35T pinion 55T spur 70MPH?
• Traxxas 4-Tec 3.0 Corv...
If you have a 4-tec 3.0 reglue your tires if you upgrade the system for more speed for no fishtail
• If you have a 4-tec 3....
Traxxas 4-Tec 2.0 Speedrun top speed over 75mph 120km/h on 2s? Tekin RX8 Pro4 Type D Drag 6500kv
• Traxxas 4-Tec 2.0 Spee...
Basic RC Charger comparison Traxxas EZ Peak Live Hota D6 Hitec multi charger x2 plus for newbies
• Basic RC Charger compa...
Hota D6 + AC:DC Dual Channel Smart Charger Basic functions
• Hota D6 + AC:DC Dual C...
SkyRC RS TW Pro Professional RC Tire Warmer Basic functions
• SkyRC RS TW Pro Profes...
Other Recommendations:
Traxxas 4-Tec 2.0 Speedrun top speed over 75mph 120km/h on 2s? Tekin RX8 Pro4 Type D Drag 6500kv
• Traxxas 4-Tec 2.0 Spee...
Traxxas 4-Tec 2.0 Speedrun Part 1 gear setups for over 60 mph 100kph on 2s Tekin RX8 Pro4 HD 4300kv
• Traxxas 4-Tec 2.0 Spee...
Traxxas 4-Tec 2.0 Speedrun Part 2 math top speed over 60mph 100kmp on 2s? Tekin RX8 HD Pro4 4300kv
• Traxxas 4-Tec 2.0 Spee...
Traxxas 4-Tec 3.0 Speed Runs 3s Hobbywing Max10 ESC 3660 4000Kv motor 35T pinion 55T spur 70MPH?
• Traxxas 4-Tec 3.0 Corv...
Must upgrades for speedruns and 2s suggestions for Traxxas 4 tec 2.0 3.0 Supra GT4 and Factory Five
• Must upgrades for spee...
Tamiya TC01 build:
For the body, skip to 5:44:22. I start with the finished product and some notes. Then I cover how to trim it.
Tamiya Team Hahn Racing Man TGS TT 01 Type E Truck Build Part 1 Unboxing
• Tamiya Team Hahn Racin...
Hobbywing V10 G4 21.5T data Analyzer and how it compares on paper to Trinity Xfactor Turnigy
• Hobbywing V10 G4 21.5T...
MyLaps RC4 Hybrid AIT10R078
AKA CA Glue
Hobbywig Electronics
Tekin
Castle Creations
Team Powers
Gens Ace
Gorilla Tape
JConcepts CA Glue
MIP Tools (Drivers)
Kobalt Pliers
Craftsman Pliers
Craftsman wrench
Tamiya Paint (PS-X)
Duratrax Paint by Horizon Hobbies
Savox Servo
Team Powers Servo
Traxxas Servo (for non-demanding applications)
Proline Bodies
Proline Tires
JConcepts Bodies
DE Wheels
WD-40
Yokomo Touring Tires
Team Powers Touring Tires
Dremel 4000
Well now I know what I gotta go buy for my 4Tec! Awesome video thanks!
My pleasure. Just make sure to make the other necessary upgrades if you have not. Mainly a front spool and I do prefer the threaded shock bodies.
Perfect timing I just got a kyosho fazer short.
Very nice. This motor is quite fun.
I am debating on keeping it in my 4-tec and swapping the spur for the HR 48T of putting it in my Slash 4x4. It is just fun tearing it up on 2s in a 4-tec.
Been loving these setup, still learning the setting though. Just gotta take the punch down a hair for my sct to clear a 40ft dragon back smooth.
😃 I love it too. This HW is the bee's knees.
Deciding between this and the tekin rx8 with pro4 4300. Your thoughts? Will be on a tekno sct410. This is cheaper in price but might be more bang for the buck.
The HW is a better value. But the Pro4 HD 4300kv is also awesome. I just do not think a Tekin rx8 and Pro4 is worth the extra money... Unless you want all the drag tunability from the rx8.
If you have a chance, I have two parts where I run the Pro4 HD in my 4-Tec 2.0. Part 1 has the setup and part 2 has the calculations I made before setting it up and the actual speed runs.
Here is part 1:
ua-cam.com/video/5xOyPPndzfE/v-deo.html
Here is part 2:
ua-cam.com/video/vZQ6ICyfQNU/v-deo.html
But I am a fan of the Tekin system set up for 2s.
Awesome brother. Yea im no pro driver, so imma just go with hobbywing for the value and get better at actual driving first. Plus my pockets aren’t deep. 😅 and i need two. One for me and one for my 10yr old also wanting to get into racing. Thanks for the advice.
How smooth is acceleration?, Is there little to no cogging being that it's a sensored system?(kinda new to brushless), thinking of putting the 3300kv or 3200kv version of this in an XV02 I plan to get.
Very smooth. It is sensored and 4-pole. So, it does not cog like the SL motors.
I run the 3660 quicrun in my gorgon at 3700kv. No cogging, wheelie machine, motor never gets above ambient temp on 2s, no matter how hard you drive. Will warm up a little on 3s, but that is too much power for it anyway. How do you think your setup would be in a rival mt10? With the 4000kv.
I think it would be great for an mt10. I just think it cogs on a 4-Tec because of the high gearing. The the MT10 I think it would be smooth due to the lower gearing. The gearing would mask the sensorless rotation start.
I think people underestimate the range of the tqi radio. I get well over 200yrd with almost all of mine. So I can easily do a 400+ yard speed run. I say almost all because I haven't tested the range on the trx4's 😊. However I do live in the country and have very little radio interference so maybe that's why I don't have any range issues with mine?
You might be right. I do not get very good range with my TQ. TQi is better. Futaba is far better in terms of range. But that could be it, less interference.
i just bought this setup for my wr8 ... g3 4000kv ,,,its impressive for the money . but i have the 3200kv g3 in my slash and there amazing
I am with you. They are impressive. Out of curiosity, why did you pick the 3200Kv for the Slash?
@telecomandorc the local track is kinda small and tight and i wanted something that would make it more controllable ... it powerslides on corners and no loss of power its consistent......i no its not as fast top end but still lloads of fun
@@telecomandorc better trq and less heat if hard on it
How is this set up going in your WR8? I’m looking at this too as stock can gets real hot on the wr8.
@@ianrichardson2691 going great and so much better than the flux setup
The motor how long is the can that 4000kv I want to put in a trx4
65.5mm
Is this motor powerful than Tekin pro4 HD?
It has more torque, but the Tekin pro4 HD 4300 still has more RPM and can reach high speeds in such a light car. If you plan on using 3s, the HW is far stronger and faster. It can handle more load. In short, it is.
@@telecomandorc Thanks a lot for the information
@@gehandx My pleasure. 🤝
Is it reliable on 3s an does that fit gorgon
It's good on 3s. Just gear properly. On a 4-Tec 2.0, it doesn't really care.
Is these 3s reliable
It is.
140A ESC Bit Overkill For 2.0 4 Tec, 80 A perfect
I would agree... then again, the entire system is overkill. 😅