I already know the working principles of most of your videos but these 3D models are so well done that now someway I understand them better, you can clearly se where the weak points are and concept just stick better in your mind, BIG THANKS!
There have been a couple of internal combustion engine designs built around this principle. One design uses double-ended pistons and was intended for use in aircraft. Last I saw it is on display at the USAF Museum in Dayton, Ohio.
il y a plus simple. La pompe variable HP à palettes. Ces dernières sont dans leurs logements sur 3 cotés et l'étanchéité se fait de chaque cotés en bout, le tout tourne avec une partie du stator.
Privet! Mozno bolshe info? Nam nado na mini traktora s vozmoznostju podacji vpered i nazad. 1. Rabochje obaroti koles Oboroti 0-200 RPM 2. 1500RPM val podachi 3. 3000RPM kosilkq
Greetings . What oil pressure can these types of pumps withstand at most? how many revolutions per minute maximum? how much maximum force (expressed in kW) coming from the engine? . can you give me an idea?
The liquid flow rate is small, so there are no large pressure losses due to local resistances. The pressure does not drop below the saturated vapor pressure, so there is no cavitation. If there is significant hydraulic resistance at the suction, cavitation will occur.
Nói thật lòng luôn cả đất nước Việt Nam này tha hồ làm mấy bay còn được mà sản xuất ra còn được mà sản xuất ra máy hệ thống mới nhất chuyen nghiệp mới nhất điều được kể cả mấy bây và tất cả đều mới nhất điều được
14 For Christ’s love compels us, because we are convinced that one died for all, and therefore all died. 15 And he died for all, that those who live should no longer live for themselves but for him who died for them and was raised again. 16 So from now on we regard no one from a worldly point of view. Though we once regarded Christ in this way, we do so no longer. 17 Therefore, if anyone is in Christ, the new creation has come:[a] The old has gone, the new is here! 18 All this is from God, who reconciled us to himself through Christ and gave us the ministry of reconciliation: 19 that God was reconciling the world to himself in Christ, not counting people’s sins against them. And he has committed to us the message of reconciliation. 20 We are therefore Christ’s ambassadors, as though God were making his appeal through us. We implore you on Christ’s behalf: Be reconciled to God. 21 God made him who had no sin to be sin[b] for us, so that in him we might become the righteousness of God. 2 Corinthians 5:14-21
I like the ideas but it seems like a stupid solution to a problem nobody had. why do people take something and make it needlessly complicated and prone to failure, its a waste of everyone's time. the inventor couldn't be happy with normal pumps he had to fuck with the whole industry and add layers of tiny springs, gears, electronics, pistons with multiple tiny seals and all that shit has to be torn down and replaced when it inevitably breaks. I cant even think of a reason to use one, what's the difference between the way this pumps liquid compared to other pumps
This is used in hydraulic systems that need constant displacement and high pressure. Its been very widely used for more than a century on pretty much any machine that uses high pressure hydraulics, construction equipment, aircraft etc.
How does* it* work*? "How it works" is a statement, not a question. You really need to learn how to create sentences that are questions. It's basic English. You can't just say "How it works", add a question mark to the end and think that's a valid question. English doesn't work that way. Don't do that.
This is not even an engine, this is a hidraulic pump that is used for everything that have a hidraulic piston, such as excavators, trucks,mobile crane, tractors etc
Ingenious design, one thing to note is that the flow is reversible depending on the swashplate position
Yes, that's exactly right
I already know the working principles of most of your videos but these 3D models are so well done that now someway I understand them better, you can clearly se where the weak points are and concept just stick better in your mind, BIG THANKS!
I can't stress enough how helpful this is for classes. Thank you sir
I'm a Dentist hugely interested in Mechanics, and this is was INCREDIBLE!!!
Beautiful explanation. It helps a lot to understand the Bent axis piston pump working.
Thanks, I'm glad you liked the video
i hope you never stop making videos
Thank you. I will try
There have been a couple of internal combustion engine designs built around this principle. One design uses double-ended pistons and was intended for use in aircraft. Last I saw it is on display at the USAF Museum in Dayton, Ohio.
thanks for the info
Do you remember the name of that engine?
Thank you for the easy-to-understand explanation. It's a mystery that it didn't rotate on one axis from the beginning.
really good video. Thanks a lot from a mechanical enginnering student!
Made these in the machine shop for 30 years , they work well if you don't over spin them .
by over spin do you mean too fast or for too long?
@@BigCroca yes ! Either will take them out !
Do you know the cost associated in the process of making these and the tools and machines which are required to make these @scottkinkead6324 ???
??
@@parthbagree9672 all to well
Do SCROLL PUMPS next please!
thanks for sharing such videos
So the piston draws fluid like a syrringe and pushes it out 180° further?
Excellent work. Thanks so much!
thanks for the comment
great videos helps a lot thank you!
il y a plus simple. La pompe variable HP à palettes. Ces dernières sont dans leurs logements sur 3 cotés et l'étanchéité se fait de chaque cotés en bout, le tout tourne avec une partie du stator.
Privet!
Mozno bolshe info?
Nam nado na mini traktora s vozmoznostju podacji vpered i nazad.
1. Rabochje obaroti koles
Oboroti 0-200 RPM
2. 1500RPM val podachi
3. 3000RPM kosilkq
Спасибо!
Looks good as a ship engine lol fluid engine with no combustion
very educative. thank you
Greetings . What oil pressure can these types of pumps withstand at most? how many revolutions per minute maximum? how much maximum force (expressed in kW) coming from the engine? . can you give me an idea?
Great animation
Thank you, very helpful
Fantastic explanation
Thanks
How can i make this simulation (by any programe)
Thank You for sharing
brilliant...thank you for sharing
Thanks
What software do you use to make simulation videos?
Cinema 4d
I respect Caucasian people for innovation
super, pozdrawiam z rodzinkom
The nice and simple explaining of the pump performance. This is difference between American and Islamic state like a mullah regime
So what's the purpose of a charge pump.
That's a Linde design hydrostatic pump
Yes, this pump is used there, but not only there.
I need to know what is the software used to make this illustrations vidéo for showing how it work the pump motor.
Cinema 4d
Very nice sir
This is so awesome
Thanks
0:38
Swash plate + Bent axis = Airbus PTU! 😉
Yes, such a hydraulic transmission is often used
which software do you use in this video？C4D？
CAN YOU EXPLAIN HOW ROTARY ENGINE WORKING...
Axial piston pump working and function
Wow! Thanks!
В какой программе делали такую анимацию ?
Cinema 4d
Mantap slur
Thank you Sir
So this is the minigun of engines
Minigun of pumps actually
👍
Awesome
excellent
mantap sekali, respect +
How the fuck do you not get cavitation on the piston face and in the chamber that fills with fluid?
The liquid flow rate is small, so there are no large pressure losses due to local resistances. The pressure does not drop below the saturated vapor pressure, so there is no cavitation. If there is significant hydraulic resistance at the suction, cavitation will occur.
Спасибо за развернутый ответ!
Da muita manuntenção
อะไรที่เข้ากับน้ำได้ไฮโดรเจน
HOW MUCH DOES IT TAKE TO MAKE THIS VIDEO?
I made this video for about 2 hours a day for 1 month
nice
👍👍
Wieso deutsche Überschrift wenn im Video Englisch gesprochen wird?
🙏🙏
เจ๋ง
Wow.
Destê sağbı
Nói thật lòng luôn cả đất nước Việt Nam này tha hồ làm mấy bay còn được mà sản xuất ra còn được mà sản xuất ra máy hệ thống mới nhất chuyen nghiệp mới nhất điều được kể cả mấy bây và tất cả đều mới nhất điều được
Bơm nhiên liệu
İyi
14 For Christ’s love compels us, because we are convinced that one died for all, and therefore all died. 15 And he died for all, that those who live should no longer live for themselves but for him who died for them and was raised again.
16 So from now on we regard no one from a worldly point of view. Though we once regarded Christ in this way, we do so no longer. 17 Therefore, if anyone is in Christ, the new creation has come:[a] The old has gone, the new is here! 18 All this is from God, who reconciled us to himself through Christ and gave us the ministry of reconciliation: 19 that God was reconciling the world to himself in Christ, not counting people’s sins against them. And he has committed to us the message of reconciliation. 20 We are therefore Christ’s ambassadors, as though God were making his appeal through us. We implore you on Christ’s behalf: Be reconciled to God. 21 God made him who had no sin to be sin[b] for us, so that in him we might become the righteousness of God.
2 Corinthians 5:14-21
2:32
I like the ideas but it seems like a stupid solution to a problem nobody had. why do people take something and make it needlessly complicated and prone to failure, its a waste of everyone's time. the inventor couldn't be happy with normal pumps he had to fuck with the whole industry and add layers of tiny springs, gears, electronics, pistons with multiple tiny seals and all that shit has to be torn down and replaced when it inevitably breaks. I cant even think of a reason to use one, what's the difference between the way this pumps liquid compared to other pumps
This is used in hydraulic systems that need constant displacement and high pressure. Its been very widely used for more than a century on pretty much any machine that uses high pressure hydraulics, construction equipment, aircraft etc.
Cl13a
Ilham anjg
How does* it* work*?
"How it works" is a statement, not a question. You really need to learn how to create sentences that are questions. It's basic English. You can't just say "How it works", add a question mark to the end and think that's a valid question. English doesn't work that way. Don't do that.
I dont like combustion engines 😊
Cringe
What does that have to do with this video?
This is not even an engine, this is a hidraulic pump that is used for everything that have a hidraulic piston, such as excavators, trucks,mobile crane, tractors etc
Okay ……………………………🤷🏽♂️
Ev guy ?
@lifcohydraulics
❤
👍👍