You would just add your sprue at the bottom with the button using the MatixGold Manufacturing commands. As far as setting the stones, I would just use a heart but undercut the prongs for the seat lay the stone in and bend over the prongs, so the stone is securely set. .08mm is a 1/4 of a point. It's probably the smallest you can get.
This is a good one! You still have to know so many things to get a professional result! I can’t tell you how often I make my own channel to have it match the lines of the ring. A command to change the angle of the ends would be amazing… until then offset curves, and recess or offset surface. 👍🏻 👏🏻👏🏻👏🏻👏🏻
There is actually content up on the channel for that. I should probably look at adding some more of that type of content in the future. It would probably be helpful huh.
Do you mean where the stones are laid out have text going down instead? If that is what you are wanting to do all you have to do is extract an isocurve on the surface and then use the Text on Curve command.
Thanks a lot Don.
More than welcome. Really appreciate the comment and your support. I hope the content is helpful.
Nice video sir Thank you.
Really appreciate that. Thanks for your comment and the support.
Thank you Don..
I really appreciate you for taking the time to leave a comment. It really helps.
thank you
Welcome!
How you do print that ring with those tiny prongs, and how do you set the stone?
You would just add your sprue at the bottom with the button using the MatixGold Manufacturing commands. As far as setting the stones, I would just use a heart but undercut the prongs for the seat lay the stone in and bend over the prongs, so the stone is securely set. .08mm is a 1/4 of a point. It's probably the smallest you can get.
CAN YOU TELL ME THAT MATRIXGOLND DOESN'T HAVE A SINGLE PRONG EDIT COMMAND?
It does. It is MRS and it’s parametric. It’s either the first in the solids ribbon or the tools ribbon. Not at my computer at the moment.
This is a good one! You still have to know so many things to get a professional result! I can’t tell you how often I make my own channel to have it match the lines of the ring. A command to change the angle of the ends would be amazing… until then offset curves, and recess or offset surface. 👍🏻 👏🏻👏🏻👏🏻👏🏻
can you make championship style ring with matrix gold?
There is actually content up on the channel for that. I should probably look at adding some more of that type of content in the future. It would probably be helpful huh.
@@donsjewelrymakingandjapantrave I will looking forward to it
if possible, can you make a tutorial to see how to fix the issue for the text on surface of the corner?
Do you mean where the stones are laid out have text going down instead? If that is what you are wanting to do all you have to do is extract an isocurve on the surface and then use the Text on Curve command.