Watching your videos makes me feel like I stayed in a Holiday Inn Express last night. So far I have changed all fluids and filters, cleaned out the idle and main jets. Big improvement i cold starting a new to me 2010 Yamaha 650 V-Star.
Wish I'd of watched these videos when I rebuilt the carbs a few months ago. This is my weekend project. Would have saved me a bunch of work doing it then. Adjust valves, sync carbs, and change front caliper and she'll be on the road by next weekend. Thanks for posting!
I’m going to do this job myself, many thanks, I’ve just ordered the six “O” rings needed to replace the old ones, might as well do it if I’m going through this lengthy process. It doesn’t look hard, just time consuming.
Hello. Thanks for the video. I didn't understand how you determine the right number for adjustment. Can you answer me? Please. And the last one was no need for adjustment. How did you determine that? Thanks again
You all prolly dont give a damn but does any of you know a way to log back into an Instagram account? I stupidly lost the account password. I appreciate any help you can offer me!
@Zane Rafael I really appreciate your reply. I got to the site thru google and im in the hacking process now. I see it takes a while so I will reply here later with my results.
Having a unique problem with my 02 star 650. Cleaned and jetted my carbs and now when the bike is cold it starts and runs fine riding. When it warms up my idle sticks badly. I put it in neutral and the idle drops back to normal. Put it in gear and take off and it happens again. The hand grip snaps back like it should but it acts like I have it cranked wide open. Searched and talked to everyone I know with no luck. Ideas? I really need help!
Once I got my front cylinder aligned, I checked front it is off by 12 teeth. So, how would I get sprocket point aligned. Do I loosen timing and turn sprocket to align with notch.
Thank you for your inspirational videos, very much appreciated 😊( I ride a 2002 Yamaha 650 Vstar Classic ) have you a video for replacing the intake manifold ? Mine needs to be replaced.. Also,, my engine light stopped coming on recently and was wondering if you have any idea as to why ? It was running for 30 seconds then turned off, ran for another 30 seconds turned off again and again and now I have no engine light and my bike won't start.. 🤔🙄🤗🤔 I checked the fuses, changed the spark plugs, but still no engine light.?.?.?.?.
Hey jc rubin let me start out by saying ur videos are extremely helpful to me. I'm a car mechanic but learning about bikes and I have a v star 650 and my starter clutch went bad but can't seem to find any video on how to remove it. I've look at ur video of valve adjustment to get an idea but don't really know if lining up the back cylinder will line up the front one so I can remove the starter clutch. Is there anything ypu could pass along for some helpful hints. Thanks Jimmy
What was the reason for removing the spark plugs? THe previous owner of my bike crossthreaded on of the plugs, I was able to get it to go in straight but now I"m scared to change them.
@@retrotechandelectronics I've finished yesterday midnight man I really appreciate your work to help us! the valve clearance was way off! and the idiot who worked on my bike left the fuel line unclamped it was literally dripping fuel thank god did this before riding it
Hi... I like to send a video that I have to you for my 2014 Yamaha V-Star 250 so I can get some input of what she is doing ( her name is Wonda). See... by mistake, the engine ran really low on oil and did not see the level well due to the visual window on the side of the engine being cloudy. Now I have added the 1.5 quarts of oil in place, she runs good idling, but when giving her gas she runs really rough with a knocking sounds coming from the cylinder head next to the front tire from the sounds of it. Any input?
Excellent video but doing this has stopped my bike running. Firstly I had oil leaking from two tappet covers and lots of white smoke shooting out these exhaust manifolds. After changing the O-rings and thread-locking the covers closed it seems to have stopped the leaking but I'm getting a lot of backfiring and barely any power on acceleration. Could there be any quick fixes?
Did you measure or adjust??? If no adjust, it could be your carbs manifold is leaking air. If you did adjust, recheck and make sure the positions didn't shift.
@@retrotechandelectronics I tightened 3. One thing I noticed is that the front cylinder cam sprocket is about 2 -2 1/2 links misaligned with the sight glass notch. Could this be a problem? Thanks for the reply
Hi @Retro Tech & Electronics, hope your doing well. Hey, I am trying to adjust the valves as per your instructions but I noticed the bike I am working on does not perfectly aligns whether on the "I", the "T I", and consequently not on the sprockets marks neither. Do you have any videos showing how to fix that? Thanks in advance.
the sprocket on the cam is connected to the sprocket on the crankshaft by the timing chain. As the chain wears over time the two marks will slightly drift apart the one on the cam shaft is the one that shows you where the cam is exactly. But for setting the valves the one on the crank shaft is close enough. After you have done this once you dont need to pull the cover off the cam shaft sprocket, just go by the crank shaft marks and make sure you are on the correct revolution of the crank by verifying the slight freeplay (tap) on the valve. If there is no freeplay and you can see the rocker move when you turn the crank shaft then you have to go around another 360°. This saves time and the need to replace the o rings on the cam sprocket covers.
@@kenwittlief255 thanks Ken. It is just that I am trying to bring back to life a friend's of mine V star 650 but I am trying to figure out how bad it is. The punch marks on the cylinder head sprockets doesn't align with the fixed marks (cylinder 1 is about 2 inches away, and cylinder 2 is about 1/8 away from the fixed mark), the timing chain doesn't seem to be damaged but I haven't disassembled the strator to see the crankshaft sprocket condition. I noticed the valves and the pistons have a lot of carbon build up, so I am trying to use some fuel system cleaner and see how it goes before having to disassemble the engine for an exhaustive cleaning and fix anything that pops up. The bike was working 'ok' but it has been sitting for about 2 years. Fuel pump not working and already replaced. Overall symptoms are bike cranks and stay running in idle, but when throttle is applied it looses power and it eventually stalls. Any ideas are welcome. Thanks
@@emilesp01 Sorry for the delay, just saw this. If the timing mark on the cam gear is 2" away from being aligned with the timing mark on the crank shaft, then that cam is way out of time with the crankshaft. That could happen if the chain tensioner has failed and the chain slipped - esp if someone pushed the bike backwards in gear, or rotated the crank shaft the wrong way with a wrench. The crank shaft spins in the opposite direction from the wheels on the 650 and 1100. Another way it could be off is if someone took off the starter and starter clutch and let the timing chain move on the cam, or had the cam off the head... With the one cam timing mark off by two inches there is no way that cylinder is firing. If the bike was running like this it was only running on the other cylinder, and it would bog down and run terribly. But having the engine bog when the throttle is open could also be gummed up jets in the carb - there are 3 passages for fuel: the "choke" enrichment jet, the pilot jet and the main jet. The main jet doesnt open till the throttle is open half way, so the engine could run ok in some throttle positions but not in others if one of the jets is plugged. But you have to resolve that cam shaft position issue first. With it that far off I am surprised the piston did not hit the open valves - maybe it did!
@@kenwittlief255 that's great info Ken, thanks a lot. I am not sure how bike was maintained (possibly not well maintained), but my friend used the bike for a couple of years and he had a couple long trips on it so I guess the assumption is bike was sometime rebuilt and possibly they didn't align the gears properly. At this point, all of your comments makes total sense, I see a lot of carbon deposits very likely caused by the very issues you described. Also, I see one cylinder covered in oil while the other is 'cleaner', along with the exhausts showing those burnt spots when the system overheats just as you also described. I'll try to fix the timing and I'll share an update here later on. Thanks for your help Ken, really appreciate it. I'll try to contact you again if that's ok.
Watching your videos makes me feel like I stayed in a Holiday Inn Express last night. So far I have changed all fluids and filters, cleaned out the idle and main jets. Big improvement i cold starting a new to me 2010 Yamaha 650 V-Star.
Glad to hear it.
Wish I'd of watched these videos when I rebuilt the carbs a few months ago. This is my weekend project. Would have saved me a bunch of work doing it then. Adjust valves, sync carbs, and change front caliper and she'll be on the road by next weekend. Thanks for posting!
you are a gentleman and a scholar my friend, gonna have to do this to my v star in about 4oo miles
Thank you, let us know how it turns out!
I’m going to do this job myself, many thanks, I’ve just ordered the six “O” rings needed to replace the old ones, might as well do it if I’m going through this lengthy process. It doesn’t look hard, just time consuming.
Thanks for the tutorial...
Very helpful 👍😎
Your videos are vet informational, I just would have loved to see it from the beginning...
Best video explaining this procedure. 🙌🏍
very good video. fantastic explanation and narration. thank you!
You’re welcome!
Nicely done. Exceptional instructions. Very easy to understand.
Glad to help.
Brilliant! Thank you heaps! Your video tutorials are the best!
Glad you like them!
Hello. Thanks for the video. I didn't understand how you determine the right number for adjustment. Can you answer me? Please. And the last one was no need for adjustment. How did you determine that? Thanks again
Thank you! I'm due to do this and you've given me the motivation to start.
Let us know how it turns out!
You all prolly dont give a damn but does any of you know a way to log back into an Instagram account?
I stupidly lost the account password. I appreciate any help you can offer me!
@Matthias Garrett Instablaster =)
@Zane Rafael I really appreciate your reply. I got to the site thru google and im in the hacking process now.
I see it takes a while so I will reply here later with my results.
@Zane Rafael it did the trick and I actually got access to my account again. I'm so happy!
Thank you so much you saved my account !
Possibly a stupid question. But should the oil be drained before doing valve adjustments? Or do an oil change after? I’m due to do both.
No, an oil change is not required for this undertaking. But if you are due, then why not.
Replico (i) per l anteriore (Ti) posteriori
Having a unique problem with my 02 star 650. Cleaned and jetted my carbs and now when the bike is cold it starts and runs fine riding. When it warms up my idle sticks badly. I put it in neutral and the idle drops back to normal. Put it in gear and take off and it happens again. The hand grip snaps back like it should but it acts like I have it cranked wide open. Searched and talked to everyone I know with no luck. Ideas? I really need help!
Great videos. Really nice walk thru
Thanks 👍
Awesome tutorial and very informative thank you
You're welcome.
I like listening to your voice.
thanks.
Thanks Mate, love the vids.👍😁
Glad you like them!
Once I got my front cylinder aligned, I checked front it is off by 12 teeth. So, how would I get sprocket point aligned. Do I loosen timing and turn sprocket to align with notch.
Thank you for your inspirational videos, very much appreciated 😊( I ride a 2002 Yamaha 650 Vstar Classic ) have you a video for replacing the intake manifold ? Mine needs to be replaced.. Also,, my engine light stopped coming on recently and was wondering if you have any idea as to why ? It was running for 30 seconds then turned off, ran for another 30 seconds turned off again and again and now I have no engine light and my bike won't start.. 🤔🙄🤗🤔 I checked the fuses, changed the spark plugs, but still no engine light.?.?.?.?.
I'm hoping it's not the ECU computer module, but very well could be..?.?..
Really helpful!! Thank you so much for this video
You're so welcome!
Made it look so easy
Not EASY, but a process...
Hey jc rubin let me start out by saying ur videos are extremely helpful to me. I'm a car mechanic but learning about bikes and I have a v star 650 and my starter clutch went bad but can't seem to find any video on how to remove it. I've look at ur video of valve adjustment to get an idea but don't really know if lining up the back cylinder will line up the front one so I can remove the starter clutch. Is there anything ypu could pass along for some helpful hints. Thanks Jimmy
Folks are asking me about the starter clutch, but I have not replaced on on video as of yet. The service manual goes into detail on the operation.
@@retrotechandelectronics ok thank you and ya I don't have one as of yet. Try to look for a free one lol
What was the reason for removing the spark plugs? THe previous owner of my bike crossthreaded on of the plugs, I was able to get it to go in straight but now I"m scared to change them.
Without the plugs the engine can be rotated into the correct positions with ease.
gonna work on mine now let's hope I do it right. Thanks for the Video!
Good luck!
@@retrotechandelectronics I've finished yesterday midnight man I really appreciate your work to help us! the valve clearance was way off! and the idiot who worked on my bike left the fuel line unclamped it was literally dripping fuel thank god did this before riding it
Good that you caught that, Ive seen ruptured fuel line issues get ugly on air cooled engines.
@@retrotechandelectronics yeah I could get burned to death cause of his mistake. thank GOD I saw it and fix it
Hi... I like to send a video that I have to you for my 2014 Yamaha V-Star 250 so I can get some input of what she is doing ( her name is Wonda). See... by mistake, the engine ran really low on oil and did not see the level well due to the visual window on the side of the engine being cloudy. Now I have added the 1.5 quarts of oil in place, she runs good idling, but when giving her gas she runs really rough with a knocking sounds coming from the cylinder head next to the front tire from the sounds of it. Any input?
Excellent video but doing this has stopped my bike running. Firstly I had oil leaking from two tappet covers and lots of white smoke shooting out these exhaust manifolds. After changing the O-rings and thread-locking the covers closed it seems to have stopped the leaking but I'm getting a lot of backfiring and barely any power on acceleration. Could there be any quick fixes?
Did you measure or adjust??? If no adjust, it could be your carbs manifold is leaking air. If you did adjust, recheck and make sure the positions didn't shift.
@@retrotechandelectronics I tightened 3. One thing I noticed is that the front cylinder cam sprocket is about 2 -2 1/2 links misaligned with the sight glass notch. Could this be a problem? Thanks for the reply
Hi @Retro Tech & Electronics, hope your doing well. Hey, I am trying to adjust the valves as per your instructions but I noticed the bike I am working on does not perfectly aligns whether on the "I", the "T I", and consequently not on the sprockets marks neither. Do you have any videos showing how to fix that? Thanks in advance.
Mine does not align on the sprocket perfectly exactly either. The mark on the sprocket is not my indicator for the correct position.
the sprocket on the cam is connected to the sprocket on the crankshaft by the timing chain. As the chain wears over time the two marks will slightly drift apart
the one on the cam shaft is the one that shows you where the cam is exactly. But for setting the valves the one on the crank shaft is close enough. After you have done this once you dont need to pull the cover off the cam shaft sprocket, just go by the crank shaft marks and make sure you are on the correct revolution of the crank by verifying the slight freeplay (tap) on the valve. If there is no freeplay and you can see the rocker move when you turn the crank shaft then you have to go around another 360°. This saves time and the need to replace the o rings on the cam sprocket covers.
@@kenwittlief255 thanks Ken. It is just that I am trying to bring back to life a friend's of mine V star 650 but I am trying to figure out how bad it is. The punch marks on the cylinder head sprockets doesn't align with the fixed marks (cylinder 1 is about 2 inches away, and cylinder 2 is about 1/8 away from the fixed mark), the timing chain doesn't seem to be damaged but I haven't disassembled the strator to see the crankshaft sprocket condition.
I noticed the valves and the pistons have a lot of carbon build up, so I am trying to use some fuel system cleaner and see how it goes before having to disassemble the engine for an exhaustive cleaning and fix anything that pops up.
The bike was working 'ok' but it has been sitting for about 2 years. Fuel pump not working and already replaced.
Overall symptoms are bike cranks and stay running in idle, but when throttle is applied it looses power and it eventually stalls.
Any ideas are welcome. Thanks
@@emilesp01 Sorry for the delay, just saw this.
If the timing mark on the cam gear is 2" away from being aligned with the timing mark on the crank shaft, then that cam is way out of time with the crankshaft.
That could happen if the chain tensioner has failed and the chain slipped - esp if someone pushed the bike backwards in gear, or rotated the crank shaft the wrong way with a wrench. The crank shaft spins in the opposite direction from the wheels on the 650 and 1100.
Another way it could be off is if someone took off the starter and starter clutch and let the timing chain move on the cam, or had the cam off the head...
With the one cam timing mark off by two inches there is no way that cylinder is firing. If the bike was running like this it was only running on the other cylinder, and it would bog down and run terribly.
But having the engine bog when the throttle is open could also be gummed up jets in the carb - there are 3 passages for fuel: the "choke" enrichment jet, the pilot jet and the main jet. The main jet doesnt open till the throttle is open half way, so the engine could run ok in some throttle positions but not in others if one of the jets is plugged.
But you have to resolve that cam shaft position issue first. With it that far off I am surprised the piston did not hit the open valves - maybe it did!
@@kenwittlief255 that's great info Ken, thanks a lot.
I am not sure how bike was maintained (possibly not well maintained), but my friend used the bike for a couple of years and he had a couple long trips on it so I guess the assumption is bike was sometime rebuilt and possibly they didn't align the gears properly.
At this point, all of your comments makes total sense, I see a lot of carbon deposits very likely caused by the very issues you described. Also, I see one cylinder covered in oil while the other is 'cleaner', along with the exhausts showing those burnt spots when the system overheats just as you also described.
I'll try to fix the timing and I'll share an update here later on.
Thanks for your help Ken, really appreciate it. I'll try to contact you again if that's ok.
great detailed video ... thanks !
You're welcome!
Your video very usful 4 me. Just bot v-star 650 and i need 2 do this work.Thank's from Russia.
Congrats! Enjoy.
Thank you a bunch! Good vid.
Hope it was helpful.
What if the timing chain is in the exact opposite spot it should be even after rotating 360 degrees?
rotate again
Well done "how to." will do soon.
I have 68,000 km on my 05 v star 650 any chance my lifters An valves need to be replaced?
With regular service....... Im betting not.
Thanks!
You’re welcome!
Nice vid bro, what's with the bangles and are u sponsored by a paper towel company
What’s a bangle?
@@retrotechandelectronics whats on your wrists
👍
👍
Lmk if u wana work on a bike ...
Thanks !
You’re welcome!