Proxxon FET Side Cutting Sled Update
Вставка
- Опубліковано 20 сер 2024
- Proxxon FET Side Cutting Sled Update For those who follow and possibly even work with my idea of a Side Cutting System for the circular saw, here is an update with a change that clearly improves the idea.
The idea itself can best be seen in the first video
• Proxxon FET Side Cutti...
Tools in the video
Proxxon FET
www.harrisknuds...
Hello again, The sled is becoming very sophisticated I really like the accuracy again. I am, at present, working on a very old caste iron, table saw, bringing it into the 21st century. It is very inspiring to see your designs and updates. Please keep up the good work. Jack from the UK I am using my wife's website. Thank you and stay healthy.
Thank you very much for your comment. I myself am quite enthusiastic about the idea, easy to make and it works completely as desired.
Vielen Dank für all die tollen Inspirationen in deinen Videos!
Macht immer wieder Spaß zuzusehen und selbst Ideen zu entwickeln.
Vielen Dank für deinen Kommentar
Mal wieder Daumen hoch, jede Erweiterung ein Genuss.
Vielen Dank für deinen Kommentar
Is your saw mounted on a turntable base? The round piece under it has me wondering! I just received my first Proxxon FET last week (I live about an hour away from their US headquarters), and I have to say it really exceeded my expectations! My satisfaction was so great that within days I ordered the TBM115 drill press and KGS80 miter saw (and spare drive belts for all three machines). Your channel was the thing that nudged me into ordering the FET after months of deciding between it, the Micro Mark, or the Jim Byrnes saw. They each have something that I don’t like, but what you’ve shown the Proxxon capable of doing sold me on it! Thanks for your excellent videos! Please keep them coming!
Thank you for your comment. The round turntable is made for linoleum cuts, but I also use it when I make videos, the saw is usually on a table in the workshop where it is clamped. You will probably be happy with the saw, but make a Cros Cut Sled, it makes use so much better.
nice enhancements !
again, you could remove a 45° chamfer at the left of the sled to use the sled even if the blade is at any angle.
Yes it will be the next step. My plan is that there should be two options for sawing at angles, vertically by angling the saw blade and horizontally with an angle stop mounted on the guide rail.
Hi Harris,
that's a great ideale!
One question: Why did you make a groove in the wooden block? Is that a guide groove for the aluminum rail?
Thanks for your comment, there doesn't need to be a groove but it helps to catch sawdust between the two strips which are hardwood which I give a little wax
@@Harris-DIY Thank you very much.
Hallo Harris,
das ist ein wirklich geniales System. Ich würde es mir gerne für meine FET bauen, da mein erster Schlitten abgearbeitet ist.
Sind diese Profile 20 x 40 und 20 x 20 mm? Das Winkelprofil dementsprechend 50 x 20 mm?
Viele Grüße aus Bremen
Dieter
Thank you for your comment. My measurements are 20 x 40, 20 x 20, and 30 x 20 but 50 x 20 can also be used. Most of it is very easy to make, but the wooden block is difficult, I had to make 5 before I made one that fit exactly. Good luck with your work.
Bravo....
Thank you for your comment
This extension is a great idea. Which profiles did you use for the Slide Cutting Sledge?
And as always ... perfectly presented. Thanks for the great videos.
Greetings from Germany ... Wolfgang
Standard 20 x 20 mm and 20 x 40 mm aluminum profiles, it can all be made for 15-20 €
Profil Uzunluk kaç cm kullandınız
👍👍
Thank you for your comment
Hi, very interesting video! Where can you buy the aluminium profile you use?
Thanks Koen.
I buy mine here www.matronics.dk/kategori/mekanik/profil-system/2020/produkt/serie-20-2040 but you can find them in many other places like AliExpress and eBay.
To your job, not to proxxon!
Thank you for your comment