Thanks for the info. I had my VYOS VIF interfaces not configured correctly and it was dropping my jumbo frames Geneve between the TN's and the Edge Node.
Thanks Jeffrey, perfect I setup the vyos router in my home lab, have three esx hosts but I have nested three esx hosts i created they can now see the network traffic on a different subnet, all i have to do is created another vcenter and a DC to look after the nested servers, before i have a go at NSX install hope that is right Top Video !!!
hey Jeffrey,I wonder to configuring a static router for vsphere vms.A vm host ip is 210.28.165.1/24,another vm host ip is 210.28.166.1/24,I hope two vms can communicate by vyos,then I want to set the gateway is 210.28.165.254/24 and 210.28.166.254/24.How can I config my vyos? appreciate for answer!!!!!!!!!!!
Thanks for such a great video. I noticed that your NSX segments show up as NSX Logical Segments on the vSphere Distributed Switch while mine show up on the Opaque Network, what configuration am I missing?
Hello, thank you for your video. For my case I can not ping from esxi to other vm in admin vlan. This vm installed in physical esxi. Is it normal? Or I need to tagg admin vlan in the os of esxi
Are you using the LTS version of VYOS? I know they have a few options where you get access to the ISO's if you contribute to the project also I think you can build your own LTS ISO.
Hi Jeffrey - how did you configure the access to your esxi hosts from your 192.168.X.X home network ?, i mean i did see source nat , for the vLANS , but how do you access the vLANED network from outside i mean from 192.168.X.X network ?, lets say i want to RDP into a JUMP host configured in vLAN 10 / ssh into a esxi host configured on vLAN 10
I'm not sure about your configuration, but i in mine, to enable cross-communication between different vlans, I would define that inside your firewall and you would be able to ping those devices on separate vlans.
Hey Jeffrey, Great Video! Thanks a lot for the details in there. Is there maybe any chance to do a quick TKG overview? Config in your Lab, Routing with NSX-T 3.1 for Tanzu ? Btw, have you ever had issues enabling Workload Management in your nested Setup? E.g. Throwing http error 404 when deploying supervisory vm‘s ? Thanks and best Mario
Thanks for the info. I had my VYOS VIF interfaces not configured correctly and it was dropping my jumbo frames Geneve between the TN's and the Edge Node.
Thanks Jeffrey, perfect I setup the vyos router in my home lab, have three esx hosts but I have nested three esx hosts i created they can now see the network traffic on a different subnet, all i have to do is created another vcenter and a DC to look after the nested servers, before i have a go at NSX install hope that is right Top Video !!!
hey Jeffrey,I wonder to configuring a static router for vsphere vms.A vm host ip is 210.28.165.1/24,another vm host ip is 210.28.166.1/24,I hope two vms can communicate by vyos,then I want to set the gateway is 210.28.165.254/24 and 210.28.166.254/24.How can I config my vyos? appreciate for answer!!!!!!!!!!!
Hi Jeffrey, What other VMs do you have inside of VLAN10, just out of interest?
Thanks for such a great video. I noticed that your NSX segments show up as NSX Logical Segments on the vSphere Distributed Switch while mine show up on the Opaque Network, what configuration am I missing?
Hello, thank you for your video. For my case I can not ping from esxi to other vm in admin vlan. This vm installed in physical esxi. Is it normal? Or I need to tagg admin vlan in the os of esxi
Are you using the LTS version of VYOS? I know they have a few options where you get access to the ISO's if you contribute to the project also I think you can build your own LTS ISO.
Hi Jeffrey - how did you configure the access to your esxi hosts from your 192.168.X.X home network ?, i mean i did see source nat , for the vLANS , but how do you access the vLANED network from outside i mean from 192.168.X.X network ?, lets say i want to RDP into a JUMP host configured in vLAN 10 / ssh into a esxi host configured on vLAN 10
I'm not sure about your configuration, but i in mine, to enable cross-communication between different vlans, I would define that inside your firewall and you would be able to ping those devices on separate vlans.
Excellent video.
Thanks!
Hey Jeffrey,
Great Video! Thanks a lot for the details in there.
Is there maybe any chance to do a quick TKG overview? Config in your Lab, Routing with NSX-T 3.1 for Tanzu ?
Btw, have you ever had issues enabling Workload Management in your nested Setup? E.g. Throwing http error 404 when deploying supervisory vm‘s ?
Thanks and best
Mario
This is really helpful. Thanks
Great thank you so much for this.