11.4.24: they've reduced the price to 355€ (without 5KG PLA) → shrsl.com/4hjmm or 399€ with 🔥5KG PLA Filament 🔥 🛒 shrsl.com/4hfgq (Affiliate) (with VAT, free shipping from Germany) I deliver honest opinions, well researched and tested (sometimes "almost scientific" ;) reviews! If you can support this idea please check my PATREON: bit.ly/2ESMtIO ✅better Nozzle: cuts.top/DFTa (also find the 0.8mm there) ✅Yi Home camera IP Cam works cuts.top/DFSO ✅ my Orca-profile (Printer, Filament and process - using their ArtillerySlicer settings) find them here: (incl. better print start procedure) → drive.google.com/drive/folders/1G26_F0p2LiV5B_ms8vAWIPakzbjXEkNs?usp=sharing
Thank yoy for a honest review. I am disappointed with how this expensive machine turned out, 8 was so hoping of having it sit eside my old x1. I have ordered the Solvol sv08 on ordered since last week but there seems to be a delay with the upgrade enclosure, maybe I will get the printer first as others have said with the inclosed to follow. Kindest regards. Mike
@RCSchim mine came with the POM wheels on the Z axis so tight that it was causing the next layer to dig into the bottom layer. Took me 2 weeks to figure it out. Like the X axis didnt travel up enough after layer change.
I bought the X4 Pro.. similar results as your Plus. Bad layer shifting which I think was fixed when I upped the X and Y current to 1.1 but it seems to have extrusion issues. Do you have suggestions for changes to printer.cfg? I tried a hardened steel 0.6 nozzle but I had problems meshing the bed.
Honestly didn't increase the current yet (or test the effect of doing that). On steel nozzle read that you need to increase temp by 10degreeC but you may have heard that already ;)
The MKS PI in it has a webcam service installed on it, it's just not enabled. I had a webcam plugged into the usb n ssh in to it n ran "systemctl start webcamd" and the camera immediately started working
coincidently I'm right now editing my K1max review ;) I wanted it, because it's large and known good, fast and now cheap coreXY (665€ on geekbuying - check the link and us my code if you wanna test it: www.geekbuying.com/go/8dQQaUoK with code NNNDEK1M it's 100€ cheaper than on crealitys own page ;) also it would be nice to know, if this code still works for others (it does for me here in EU)
Do you maybe use onshape? Than you can directly export from there: cad.onshape.com/documents/de6a7477e58b47900f33a8f8/w/e8185b8e8a612ed09a6affde/e/d3294814d877ad71c2e7c031
Or download the file here: drive.google.com/file/d/11rHfoM7li4Yo_LCA7U1VpEPBGairuegW/view?usp=drivesdk I think this was for the party x3, but it works for the X4 as well, just need to cut 2 ends off a bit
Nice video. I wanted to buy it but now i dont 😅 Im Planning to buy a mid-budget 3D printer with kinda big print area. Can you suggest the best of them??
The best one I have currently (and which was aiming for, after the X4 was such an dissapointment) was the Creality K1 max. They came down in price quite well and are just reliable. Also I think the Ender 3 v3 plus could be a good budget big printer. I wish there was a 30x30 version of the Flashforge 5mpro - because this one is so reliable and has really good print quality...
Buenos dias , compre una impresora artillery x4 plus hace veinte dias al segundo dia de uso el interruptor de encendido no funciona, el motor del extrusor deja de funcionar, la pantalla de la impresora se queda conjelada y la maquina deja de funcionar por completo al cabo de 9 dias. pongo dos tikets a soporte y llevo 12 dias sin respuesta. Tengo dos artillery sidewinder x2 mas y no he tenido problemas con ellas pero la artillery x4 que he comprado esta totalmente defectuosa y el servicio de atencion al cliente no me da ninguna solucion. Por mi experiencia y por lo que he leido en plataformas se trata de una impresora pesima no la compren si estan a tiempo.
Sorry to hear that! I also heard that they struggle with service quality. I think it's a sign of them going out of business.... And if many angry customers speak up, this will speed this up! Capitalism: survival of the fittest ;) Thanks for sharing your experience!
@Rcschim thanks, man! 😊 My father is much better, he already watched the big drone video and everything. Now my mother isn't very well... She went to the medic... Let's see what happens.
€350 isn't cheap for a bedslinger. Remam I checked on the site in Germany TOMS SOMETHING and the price cor the unit with 5 rolls of their cheapest filement is€427?. Remember this unit has lact genn betleveling and dummed down software 😢
I agree, now I would probbably take a look at the Creality V3 plus (their newest bedslinger in 30x30 size) - or as I did - go for the K1 max. It's the allrounder I was looking for (decent buildvolume and OK quality, plenty of options since it's encased...)
11.4.24: they've reduced the price to 355€ (without 5KG PLA) → shrsl.com/4hjmm
or 399€ with 🔥5KG PLA Filament 🔥 🛒 shrsl.com/4hfgq (Affiliate)
(with VAT, free shipping from Germany)
I deliver honest opinions, well researched and tested (sometimes "almost scientific" ;) reviews! If you can support this idea please check my PATREON: bit.ly/2ESMtIO
✅better Nozzle: cuts.top/DFTa (also find the 0.8mm there)
✅Yi Home camera IP Cam works cuts.top/DFSO
✅ my Orca-profile (Printer, Filament and process - using their ArtillerySlicer settings)
find them here: (incl. better print start procedure)
→ drive.google.com/drive/folders/1G26_F0p2LiV5B_ms8vAWIPakzbjXEkNs?usp=sharing
Appreciate the honest review. Seems like a great first printer for learning how to tune printers and valuable long term for its size
Thank yoy for a honest review. I am disappointed with how this expensive machine turned out, 8 was so hoping of having it sit eside my old x1. I have ordered the Solvol sv08 on ordered since last week but there seems to be a delay with the upgrade enclosure, maybe I will get the printer first as others have said with the inclosed to follow.
Kindest regards. Mike
Good review, thank you!
@RCSchim mine came with the POM wheels on the Z axis so tight that it was causing the next layer to dig into the bottom layer. Took me 2 weeks to figure it out. Like the X axis didnt travel up enough after layer change.
I bought the X4 Pro.. similar results as your Plus. Bad layer shifting which I think was fixed when I upped the X and Y current to 1.1 but it seems to have extrusion issues. Do you have suggestions for changes to printer.cfg? I tried a hardened steel 0.6 nozzle but I had problems meshing the bed.
Honestly didn't increase the current yet (or test the effect of doing that). On steel nozzle read that you need to increase temp by 10degreeC but you may have heard that already ;)
I will sell my X4 an use the k1max instead (it can be had for under 700$ at geekbuying with the correct code (let me know if you need this ;)
The MKS PI in it has a webcam service installed on it, it's just not enabled. I had a webcam plugged into the usb n ssh in to it n ran "systemctl start webcamd" and the camera immediately started working
Thanks for the info, will try that
I like it but I feel like the price is kinda high for a bed slinger like that when you can get a large corexy for around that price.
coincidently I'm right now editing my K1max review ;) I wanted it, because it's large and known good, fast and now cheap coreXY (665€ on geekbuying - check the link and us my code if you wanna test it: www.geekbuying.com/go/8dQQaUoK with code NNNDEK1M it's 100€ cheaper than on crealitys own page ;)
also it would be nice to know, if this code still works for others (it does for me here in EU)
Very honest review, after that I bought the X4 Plus, today I received YI camera. Would you share a model to the Yi camera holder?
Do you maybe use onshape?
Than you can directly export from there:
cad.onshape.com/documents/de6a7477e58b47900f33a8f8/w/e8185b8e8a612ed09a6affde/e/d3294814d877ad71c2e7c031
Or download the file here:
drive.google.com/file/d/11rHfoM7li4Yo_LCA7U1VpEPBGairuegW/view?usp=drivesdk
I think this was for the party x3, but it works for the X4 as well, just need to cut 2 ends off a bit
@@Rcschim Thank you very much! I'm very grateful!
Nice video. I wanted to buy it but now i dont 😅
Im Planning to buy a mid-budget 3D printer with kinda big print area. Can you suggest the best of them??
The best one I have currently (and which was aiming for, after the X4 was such an dissapointment) was the Creality K1 max. They came down in price quite well and are just reliable.
Also I think the Ender 3 v3 plus could be a good budget big printer.
I wish there was a 30x30 version of the Flashforge 5mpro - because this one is so reliable and has really good print quality...
Just goes to show that even with the right equipment, any idiot can fail
Buenos dias ,
compre una impresora artillery x4 plus hace veinte dias al segundo dia de uso el interruptor de encendido no funciona, el motor del extrusor deja de funcionar, la pantalla de la impresora se queda conjelada y la maquina deja de funcionar por completo al cabo de 9 dias. pongo dos tikets a soporte y llevo 12 dias sin respuesta.
Tengo dos artillery sidewinder x2 mas y no he tenido problemas con ellas pero la artillery x4 que he comprado esta totalmente defectuosa y el servicio de atencion al cliente no me da ninguna solucion.
Por mi experiencia y por lo que he leido en plataformas se trata de una impresora pesima no la compren si estan a tiempo.
Sorry to hear that! I also heard that they struggle with service quality. I think it's a sign of them going out of business.... And if many angry customers speak up, this will speed this up!
Capitalism: survival of the fittest ;)
Thanks for sharing your experience!
Fantastic review, Mario! Thanks! 😃
It definitely looks like a pretty nice option!
Stay safe there with your family! 🖖😊
Hi Mario, thanks for commenting! I hope your family is better again? All the best down there!
@Rcschim thanks, man! 😊
My father is much better, he already watched the big drone video and everything. Now my mother isn't very well... She went to the medic... Let's see what happens.
I just read about dengue fever. Sounds horrible. Hope you all get/ stay well!
€350 isn't cheap for a bedslinger. Remam I checked on the site in Germany TOMS SOMETHING and the price cor the unit with 5 rolls of their cheapest filement is€427?. Remember this unit has lact genn betleveling and dummed down software 😢
I agree, now I would probbably take a look at the Creality V3 plus (their newest bedslinger in 30x30 size) - or as I did - go for the K1 max. It's the allrounder I was looking for (decent buildvolume and OK quality, plenty of options since it's encased...)
The only good thing in that piece of trash is the frame.