Worked for me to solve the issue. Only thing that wasn't mentioned in the video which is very important is, when you separate out the toner from the cartridge after removing the two side brackets, the ink will spill out all of a sudden. The two parts have rubber pipes just touching each other which pass the ink powder. The pipe holes are big (around 1 cm wide) which would make it very difficult to put together after cleaning. So you should do this when your toner is almost empty. Avoid doing this on a full toner. Also, take care of the gears on one side. As soon as you tilt the toner, it will spill ink as well as lose all gears. Its not difficult to put them back, but not everybody can do it. Other than these two things, everything worked as shown. Thank you for making the video!
I found this out the hard way. I wish I had seen this comment before I started. I had full toner and almost half of it spilled out during the process. It's very very messy and to make matters worse the lines are still there. I just threw it in to a garbage bag and ordered a drum for $87. Should've done it in the first place. Thanks for your efforts though.
I worked for me, but I had to do something wrong, because instead of white columns I received black ones :P I had to separate the toner again and clean the green bar from the ink. Definitely the better way is to clean it when ink is almost empty! But anyway, thanks for the video
Hi, Thanks for your video. Very informative. I have the HP 1202NW and my problem is two white columns (each column about 3 characters in width), position is about 1 inch from the Left. I followed your cleaning method, but the problem remains. Your expertise is most helpful. Thanks, Don
Vídeo útil, tengo una HP Neverstop 1000a y me funcionó el vídeo. Mis impresiones salían con una líneas verticales que desaparecieron después de ver este vídeo. 100% recomendado 👍🏼
@@BilalKhalid Tengo una pregunta, ya han pasado dos semanas y le estoy volviendo hacer el mismo proceso. Pero siento que mi impresora bota demasiado polvo negro, por favor, ayúdame
If you do this, you will likely change the printer: it is a mess. First, when dismounting, the video does not tell that ink powder is going to exit through these big holes. A lot of ink powder. You better do it in a place that you can clean it afterwards. The same happens when you try to mount it again, it is very tricky, you will very likely finish throwing all the cartridge in a garbage bag, and promising to yourself to never again buy one of those printers.
I found this out the hard way. I wish I had seen this comment before I started. I had full toner and almost half of it spilled out during the process. It's very very messy and to make matters worse the lines are still there. I just threw it in to a garbage bag and ordered a drum for $87. Should've done it in the first place. Thanks for your efforts though.
Qué tal? Ya realice ese proceso 2 veces pero la impresión aún me sale con una pequeña raya blanca. Hay algo más que deba hacer para poder solucionar ese problema?
Using metal to clean toner off the blade is not a good idea. Use a clean brush instead, and it's quicker and more efficient. Apart from that, good video.
Abhi mere pass same model nahi ha , nai to apko demo de deta, laser ka mirror ko saaf karen cotton bud ( kaan mei marnay wali teeli) k sath. Toner bahar nikalain and neechay black color ka laser unit hoga. Us k andar peechay se narrow path hoga, us k andar cotton bud dal kar saaf karaen, iss mirror per toner girnay se print blank aata hay
Worked for me to solve the issue. Only thing that wasn't mentioned in the video which is very important is, when you separate out the toner from the cartridge after removing the two side brackets, the ink will spill out all of a sudden. The two parts have rubber pipes just touching each other which pass the ink powder. The pipe holes are big (around 1 cm wide) which would make it very difficult to put together after cleaning. So you should do this when your toner is almost empty. Avoid doing this on a full toner. Also, take care of the gears on one side. As soon as you tilt the toner, it will spill ink as well as lose all gears. Its not difficult to put them back, but not everybody can do it. Other than these two things, everything worked as shown. Thank you for making the video!
I found this out the hard way. I wish I had seen this comment before I started. I had full toner and almost half of it spilled out during the process. It's very very messy and to make matters worse the lines are still there. I just threw it in to a garbage bag and ordered a drum for $87. Should've done it in the first place. Thanks for your efforts though.
Simply fixed! Thank you.
Just one thing, metal bar should be clicked correctly until you hear clicking sound!
Unlike other videos, here the person is not holding opened parts of cartridge upside down and hence doesn't spill the tonner out. Informative video.
I worked for me, but I had to do something wrong, because instead of white columns I received black ones :P I had to separate the toner again and clean the green bar from the ink. Definitely the better way is to clean it when ink is almost empty! But anyway, thanks for the video
Thank you so much! Very messy solution but amazing that you are so much more help than HP is!
Happy to help!
Hi,
Thanks for your video. Very informative.
I have the HP 1202NW and my problem is two white columns (each column about 3 characters in width), position is about 1 inch from the Left.
I followed your cleaning method, but the problem remains.
Your expertise is most helpful.
Thanks,
Don
the issue is with the blade and magnet roller inside the cartridge, try to clean them both again. hopefully it will fix your print quality Don.
Vídeo útil, tengo una HP Neverstop 1000a y me funcionó el vídeo. Mis impresiones salían con una líneas verticales que desaparecieron después de ver este vídeo.
100% recomendado 👍🏼
Me alegro de que haya funcionado
@@BilalKhalid Tengo una pregunta, ya han pasado dos semanas y le estoy volviendo hacer el mismo proceso. Pero siento que mi impresora bota demasiado polvo negro, por favor, ayúdame
well done, been dealing with this issue a while now. perfect fix! thank you
Thank you so much for helping me! This was super easy to follow and it helped my printer out.
Glad it helped!
Its a major problems. In printer But. good sulotion nice. . .
You should have described what Toner is - A POWDER - for those of us who did not know.
If you do this, you will likely change the printer: it is a mess. First, when dismounting, the video does not tell that ink powder is going to exit through these big holes. A lot of ink powder. You better do it in a place that you can clean it afterwards. The same happens when you try to mount it again, it is very tricky, you will very likely finish throwing all the cartridge in a garbage bag, and promising to yourself to never again buy one of those printers.
I wish I read this before I did it. Because that’s exactly what happened. I ended up losing some ink. But it worked out in the end but I was so sad.
@@Hamnah2002 HP Neverstop 1200w is a piece of garbage!
Never Buy this printer. Money waste.
I found this out the hard way. I wish I had seen this comment before I started. I had full toner and almost half of it spilled out during the process. It's very very messy and to make matters worse the lines are still there. I just threw it in to a garbage bag and ordered a drum for $87. Should've done it in the first place. Thanks for your efforts though.
great sir thanks a lot , u r the bosss
You are most welcome
I did the same as your video and my printer is printing now white papers no writing at all
Thank you 🙏
You’re welcome 😊
Qué tal? Ya realice ese proceso 2 veces pero la impresión aún me sale con una pequeña raya blanca. Hay algo más que deba hacer para poder solucionar ese problema?
sir mera hp 104 a drum leak krne laga hai theek krvane ke baad ab nea drum lena hoga .....ya kuch ho sakta hai ....please reaply oon i need your help
Para conseguir piezas para este tipo de impresora, donde los puedo conseguir en México???? Me dicen es el panel y la tarjeta madre.
From online market like ali express
very helpful!
Glad it helped
I followed same steps but my printer is printing blank pages .no print on the paper.
Could you use a clean brush (eg a toothbrush) to clean out that metallic part, instead of the screwdriver?
Yes
well done
Might you help me? then add a new toner continues to indicate that the level is low
There is an issue with sensor
Nice 👍 video. New subscriber no skipping ads like and share
Glad to hear! Thx
Thank You Bro
Using metal to clean toner off the blade is not a good idea. Use a clean brush instead, and it's quicker and more efficient. Apart from that, good video.
Noted sir!
Thank u
very well made video
Thx
Thanks, great manual
Thankyou It worked
Wc
Did not work out
Sir मेरे प्रिंटर p 1200 नेवरस्टॉप main ऊपर की लाइन पेपर के टॉप में आ रही है तथा ऊपर की लाइन के आधा अक्षर आ रहे हैं क्या करना चाहिए
roman hindi mei type karo question bro.
@@BilalKhalid sir mere printer main upper line adha hi show ho rhi hai aur print A4 ke top pr ho rha hai please help me
sir mere printer main upper line adha hi show ho rhi hai aur print A4 ke top pr ho rha hai please help me
Help, i followed your steps but upon printing again, obly blank paper comes out 😢
something went wrong
I should have watch this first before contacting HP support, they wasted almost an hour of my time.
Pity on you
sir mere printer main upper line adha hi show ho rhi hai aur print A4 ke top pr ho rha hai please help me
Drum change karo
एचपी का प्रिंटर है टू कॉपी करने पर एकदम से सादा रहा है तो क्या करें सर
starts @2:00
Refill krne k baad bhi ink level 0 bata raha he
Check the sensor
Nahi ho Raha hai sahi.. clean karne ke baad bhi nahi sahi hua
Blade saaf karen achay se and charging bhi clean karen
Nahi hora kiya do baar try tabhi wahi issue hai
Laser mirror clean karen, cotton bud se
@@BilalKhalidbhai mere printer se print dene ke baad blank pepar aara hai kuch bhi nahi dikhra kya karna padega ispe
Abhi mere pass same model nahi ha , nai to apko demo de deta, laser ka mirror ko saaf karen cotton bud ( kaan mei marnay wali teeli) k sath. Toner bahar nikalain and neechay black color ka laser unit hoga. Us k andar peechay se narrow path hoga, us k andar cotton bud dal kar saaf karaen, iss mirror per toner girnay se print blank aata hay
Do not buy this mechine very bead printers
😅
👍🏻
सर जी
12 सो ए का प्रिंटर
एचपी का प्रिंट है