sorry to be offtopic but does someone know of a trick to get back into an instagram account? I was dumb lost the password. I appreciate any help you can offer me
All because of your videos , I am I a confident position today ! Able to do any challenging designs in future that crosses my way. And please do motivate us like this and we are very supportive to your UA-cam channel and creative designs you teach and come up with. Greetings from India.
Weld... The thing I'm dreaming about for more than 10 years but had no idea existed ! Brought to me by Justin... Who else ? :D You're always a big help, even for what I'm not looking help with ^^ Thanks man !
This seems like it would be wonderful for throwing curved sidewalks, parking lots, etc. onto site plans.....very excited to try out. Thanks for your work, chief.
Hello from London, Firstly , I can’t thank you enough for these video tutorials. You have enabled me to save lots of time modelling to sets for work, so thank you . Secondly I need to create a cave for a to studio set, 20ft high and modelling in S/UP , I’ve gone down the sandbox route and sculpting the walls , it’s time consuming and although I want an organic look , you def get that with sandbox with little control (that’s due to my lack of experience too) . I wondered if you had any ideas using flowify or another type of extension or general advise . I’ll beef it all up with rocks found in the 3D warehouse. Thanks again for the tutorials
Pra quem não se dá mt bem com inglês eu tentei fazer o passo a passo, espero que ajude: 1 - Criar um arco 2 - Copiar o arco para usar como referência 3 - Criar uma linha a partir da ferramenta “arco” da ponta de um arco até o arco referência 4 - Unir os segmentos usando a extensão “Weld”. 5 - Copiar o seguimento formado com o comando “move” até a outra ponta do arco 6 - Espelhar ou virar a linha usando a ferramenta “escala” ou “rotacionar” 7 Clicar na ferramenta Extrude by rails, selecionar respectivamente o primeiro arco criado, as duas linhas e depois o arco referência 8 - Seguir as opções 9 - Criar uma linha no no eixo azul a partir do inicio do primeiro arco 10 - Criar um retângulo no em direção a extensão da forma 11 - Fazer outro segmento de reta a partir da outra ponta do mesmo arco e conecta-la ao retângulo criado 12 - Selecionar as duas linhas e criar grupo 13 - Selecionar o retângulo e criar grupo 14 - Selecionar os 3 grupos e formar outro grupo 15 - Fora dos grupos, criar um retângulo em cima do retângulo criado 16 - Criar formas para servirem de guias para a ferramenta Flowify 17 - Selecionar toda a forma e usar a ferramenta Multiples offsets 18 - Seguir as opções 19 - Deletar as linha entre linhas das “paredes” formadas com a borracha. 20 - Clique dentro da “parede” criada duas vezes para seleciona-la e depois segurando shift selecione toda a forma (isso vai deslecionar as paredes e selecionar apenas as faces [inverteu-se a seleção]) e depois delete as faces. 21 - Crie um grupo dessa forma separadamente 22 - Selecione os dois grupos (o grupo com os 3 ‘componentes’ e o grupo que acabamos de criar) 23 - Clique na ferramenta Flowify 24 - Esse processo pode demorar um pouco dependendo da configuração do seu computador.
Pretty interesting program. I am professional digital modeler working in automotive area. Bit curious how this will work and affect to automotive designers. Thank you for sharing your video
That is so amazing ong man! Honestly love your videos, I am currently working on a project in which I’m turning a rig cage design into a shopping mall, I did it in Rhino but I wanted to know if it will be possible in Sketchup, I’d appreciate any tips from you Sir! Thank you!
TheSketchUpEssentials well I need to create a shopping mall between a train bridge shifting into a y shape, so like a canopy sort of thing, but using the concept of ribs, to have glass in the middle of each rib. Thanks
A big thank you for your many tutorials! I follow them with great interest and start to master a lot of plugins thanks to you! But Flowify continues to pose a problem for me: I am desperately trying to operate on a curved surface (vase). I create the half-vase without thickness, I have 4 corners. I draw my lines, and I make my surface, I make my three groups that I put in one big group. I click on "Impose Grid", but it doesn't work. I tried several times, the grid cannot apply. I'm desperate. Do you know where the problem can come from? Many thanks in advance if you have the time and the desire to respond.
Hi! I'm having a problem with the download of the extention. The plugin doesn't appear for use, even if I go to the tool window, I just can't find the plugin
Regarding the flowify extension, did you just draw any random rectangle, and connected the two corners with those projection lines on the main object? Because in one of the videos about flowify, you said that the impose grid won't work unless the dimensions of the rectangle are exactly the same as the main object below!
Here.. *burp* hold muh beer bub. *cracks knuckles* So I press ALT +F4 and then click chrome and then UA-cam. After that, then I type in HOW TO SKETCHUP and hit enter. Next I scroll with the middle mouse wheel and left click one with a cool thumbnail and binge watch because I know damn well I won't be able to do this? 😂
i din't know whether is my geometry too complex or me making mistake. When i tap the "impose grid" button, it just wont create grid. However, when i try something simpler, it works properly...Really need some help here (Plus, it would be great if you can add some limitation and disadvantage on each of the plugins, it could really help beginners like us to choose the right plugins!!) Thanks!
Does your more complex piece of geometry have 4 corners? Are you sure you have your grouping set up right? 99% of the time when this extension doesn't impose a grid, it seems to be because the groups aren't set up properly, but if your object doesn't have 4 corners, Flowify won't recognize it
Great videos... I'm working with sketchup 2018 but the surface still appears in dots after extrude edges by rail, is there a way I can generate the dots into a complete surface?
This may be more helpful - ua-cam.com/video/5WLqNj6ihT4/v-deo.html - Generally, if you model your rail straight and you set it up right, you can use Flowify to bend your shape. Thanks!
Can you provide more information on which extrusion extension you have downloaded? I've not finding the same one you are using in the extension warehouse. Thanks!
Hey I’m a tech ed teacher and really would like to do a lesson where The students take apart a plastic toy and find a piece in it that they could measure and design on sketchup then 3-D print that object. Would this be possible? Let me know what you guys think
Everything seems so clear and easy, but impose grid just does not work at all for me sadly :/ even with the simplest of shapes. Maybe something wrong with my plugin?
what if you want to adjust heights in areas of your extrusion? your shape has a vertical dip as the width of the outline narrows. Is it possible to adjust that?
I'm in my fourth year studying architecture, and I always come to you to add a lil sauce to my projects. Keep at it !!!
Nice - glad I could help! :)
sorry to be offtopic but does someone know of a trick to get back into an instagram account?
I was dumb lost the password. I appreciate any help you can offer me
@@mordechaibrooks5403 Ask you partner/ex/date for their password directly ;)
All because of your videos , I am I a confident position today ! Able to do any challenging designs in future that crosses my way. And please do motivate us like this and we are very supportive to your UA-cam channel and creative designs you teach and come up with. Greetings from India.
Whenever I got stuck in a situation you are always there to help thanks alot, ❤️
Weld... The thing I'm dreaming about for more than 10 years but had no idea existed !
Brought to me by Justin... Who else ? :D
You're always a big help, even for what I'm not looking help with ^^
Thanks man !
Glad it helped!
YOU Sir just saved my architecture project on a deadline! Thank you very much! haha
Awesome! :)
OMG, i have Modelgasm while watching your vids. Youre sketchup God.
J, THAT was fantastic! These extensions and what can be done with them is truly amazing!
This is the best free software Ive seen. Respect.
👍
You start archicad.. You teach a lot with easy .. i am form bangladesh
This seems like it would be wonderful for throwing curved sidewalks, parking lots, etc. onto site plans.....very excited to try out. Thanks for your work, chief.
Thanks for watching!
I disable my ads for this channel. Thanks so much!
One day I'll get there! Congratulations, my friend!
Thanks for watching!
Love your voice and way of teaching!
Thanks :)
I am always watch you'r tutorials and thankful for you.
Thanks very much!
Thank you very much from Hyderabad, India!
Brilliant I am battling to get my first exercise along your tutorial
Great review! I'm new to product design, and one of my projects is organic like these examples. Thanks!
Hello from London, Firstly , I can’t thank you enough for these video tutorials. You have enabled me to save lots of time modelling to sets for work, so thank you . Secondly I need to create a cave for a to studio set, 20ft high and modelling in S/UP , I’ve gone down the sandbox route and sculpting the walls , it’s time consuming and although I want an organic look , you def get that with sandbox with little control (that’s due to my lack of experience too) . I wondered if you had any ideas using flowify or another type of extension or general advise . I’ll beef it all up with rocks found in the 3D warehouse. Thanks again for the tutorials
You're the best! Ofc We have to follow your channel instead of garebage channels..
There are a bunch of good channels out there as well - just make sure what you're hearing makes sense to you :)
I had to subscribe! Simple yet amazing explanation! God bless you for sharing your knowledge my friend!
Thanks for watching! :)
Chapeau et champion.
I mist that one in January ! And I really like this video. This will be useful to me.
Thanks again,
Cool! Have fun with it George!
clear and easy to follow tutorial!thanks!
Thanks very much!
This is gold
good work king, love you
Appreciate it!
very good tutorials! thanks, bro.
Glad you like them!
thank you so much for this video
Hi ..my best regard for you & thanks a lot ............your guide ............
Thanks for watching!
Just Started,, thanks lot broo
Welcome 👍
your videos are amazing..... very much helpful, Thank you so much
Glad you like them!
great tutorial! i need to subscribe! God bless you for sharing your knowledge!
Thanks very much! Glad you liked it!
Thanks a lot bro.
your videos are very good, thank you so so much
Really glad you're liking them!
THANKYOU FOR SUCH AMAING TUTORIALS!!
Thanks for watching!
Big thanks Bro.
Thanks for watching!
Great job, many thanks for sharing this 👍
thank you this is brilliant 😁
No problem 😊
Thanks A Lot Dude
You make me interest in curve surfaces that all the time i have problem thank u very much for your desire ....
Glad you liked it!
It's just awesome
👍
Pra quem não se dá mt bem com inglês eu tentei fazer o passo a passo, espero que ajude:
1 - Criar um arco
2 - Copiar o arco para usar como referência
3 - Criar uma linha a partir da ferramenta “arco” da ponta de um arco até o arco referência
4 - Unir os segmentos usando a extensão “Weld”.
5 - Copiar o seguimento formado com o comando “move” até a outra ponta do arco
6 - Espelhar ou virar a linha usando a ferramenta “escala” ou “rotacionar”
7 Clicar na ferramenta Extrude by rails, selecionar respectivamente o primeiro arco criado, as duas linhas e depois o arco referência
8 - Seguir as opções
9 - Criar uma linha no no eixo azul a partir do inicio do primeiro arco
10 - Criar um retângulo no em direção a extensão da forma
11 - Fazer outro segmento de reta a partir da outra ponta do mesmo arco e conecta-la ao retângulo criado
12 - Selecionar as duas linhas e criar grupo
13 - Selecionar o retângulo e criar grupo
14 - Selecionar os 3 grupos e formar outro grupo
15 - Fora dos grupos, criar um retângulo em cima do retângulo criado
16 - Criar formas para servirem de guias para a ferramenta Flowify
17 - Selecionar toda a forma e usar a ferramenta Multiples offsets
18 - Seguir as opções
19 - Deletar as linha entre linhas das “paredes” formadas com a borracha.
20 - Clique dentro da “parede” criada duas vezes para seleciona-la e depois segurando shift selecione toda a forma (isso vai deslecionar as paredes e selecionar apenas as faces [inverteu-se a seleção]) e depois delete as faces.
21 - Crie um grupo dessa forma separadamente
22 - Selecione os dois grupos (o grupo com os 3 ‘componentes’ e o grupo que acabamos de criar)
23 - Clique na ferramenta Flowify
24 - Esse processo pode demorar um pouco dependendo da configuração do seu computador.
Very cool technique!
Thanks very much!
great Video thx
Thanks for watching!
You are amazing! Loved your work.
😎😎👍
Love you're creative ideas. Makes me wonder how far you can go with flowefy before it crashes. :-)
As long as your PC will keep generating new geometry!!!!
very usefull channel, many thanks
Pretty interesting program. I am professional digital modeler working in automotive area. Bit curious how this will work and affect to automotive designers. Thank you for sharing your video
Amazing tutorial 😍
This is wonderful
Great! Thank you!
Glad you liked it!
Thanks Man! This is so helpful.
Thanks - glad you liked it!
10:20 you can triple click and then deselect the outer one with shift(or ctrl, i dont remember) click. Much faster ✌️
I'd say about the same, actually, but still should work - thanks!
amazing work .. thank u so much
Thanks for watching!
Nice Tutorial!
😎😀
Thanks again
No problem!
crazy videos babe
Glad you're liking them
Very nice! Thanks.
Thanks Chipp!
Just Amazing!
😎
Very cool stuff!
Thanks!
thanks
😀
Thank you sir
:)
Wow bro. you are marvelous ;)
loved it
Thanks!
Love u bro u're are a real deal
Thanks very much - glad you're liking the videos!
I'm making a realistic model of a tree. I am building a tree house in it.
This would be great for placing bark on a branch. I will try it.
Congrats!
Thanks :)
Epic, that is all
😎
good job
Thanks :)
THIS PLUGIN HAS HOW TO DOWNLOAD IT FOR SKETCHUP 2008 EXTRUSION
Impressive !
Thanks :)
You could easily make this same thing with the follow me. It never hurts to download an extra plugin for Sketchup
That is so amazing ong man! Honestly love your videos, I am currently working on a project in which I’m turning a rig cage design into a shopping mall, I did it in Rhino but I wanted to know if it will be possible in Sketchup, I’d appreciate any tips from you Sir!
Thank you!
Sorry, I'm not really understanding what kind of shape you're trying to create...
TheSketchUpEssentials well I need to create a shopping mall between a train bridge shifting into a y shape, so like a canopy sort of thing, but using the concept of ribs, to have glass in the middle of each rib. Thanks
Thank you for the tutorial.
Can sketchup build complex Jewelry design instead of using Rhino or blender?
A big thank you for your many tutorials! I follow them with great interest and start to master a lot of plugins thanks to you!
But Flowify continues to pose a problem for me: I am desperately trying to operate on a curved surface (vase). I create the half-vase without thickness, I have 4 corners. I draw my lines, and I make my surface, I make my three groups that I put in one big group. I click on "Impose Grid", but it doesn't work. I tried several times, the grid cannot apply. I'm desperate. Do you know where the problem can come from? Many thanks in advance if you have the time and the desire to respond.
i have the same problem here.. please, anyone can explain this? thank youuuuu
perfect thank you i have a question please answer how i can use .fbx or .obj format in sketchup ?
Looks the plugin asks you questions as if a quiz is going on😁,BTW very useful
Lol - lots of questions equals lots of options!
hi! Could I ask how to change the height of the middle part? Without adjusting the both ends
Wow cool
Glad you liked it!
Is this works on versions of 2016 sketch up?
Hi Justin, How do I access the extrusion tools?
the multiple offset plugin is not visible..please help
nice video,
Thanks very much!
very nice.....thanks....ok
Thanks very much!
Do the techniques and features you use require paid sketchup pro or will the free web based version suffice?
good video,, like
Thank you :)
Hi! I'm having a problem with the download of the extention. The plugin doesn't appear for use, even if I go to the tool window, I just can't find the plugin
can this work for a terrain and put it on top the sidewalks and roads? cause it dosent work that example for me
hey well I clicked show terrain but it didn't work on my google earth view so do you know how to solve that problem??
Hello sir , how to import SketchUp models in substance painter and add materials ?
Regarding the flowify extension, did you just draw any random rectangle, and connected the two corners with those projection lines on the main object? Because in one of the videos about flowify, you said that the impose grid won't work unless the dimensions of the rectangle are exactly the same as the main object below!
Here.. *burp* hold muh beer bub.
*cracks knuckles*
So I press ALT +F4 and then click chrome and then UA-cam.
After that, then I type in HOW TO SKETCHUP and hit enter. Next I scroll with the middle mouse wheel and left click one with a cool thumbnail and binge watch because I know damn well I won't be able to do this? 😂
i din't know whether is my geometry too complex or me making mistake. When i tap the "impose grid" button, it just wont create grid. However, when i try something simpler, it works properly...Really need some help here
(Plus, it would be great if you can add some limitation and disadvantage on each of the plugins, it could really help beginners like us to choose the right plugins!!) Thanks!
Does your more complex piece of geometry have 4 corners? Are you sure you have your grouping set up right? 99% of the time when this extension doesn't impose a grid, it seems to be because the groups aren't set up properly, but if your object doesn't have 4 corners, Flowify won't recognize it
Great videos... I'm working with sketchup 2018 but the surface still appears in dots after extrude edges by rail, is there a way I can generate the dots into a complete surface?
Try updating to the most recent version of extrude tools?
Can we do it with spiral staircase that has metal circles as handrail .
This may be more helpful - ua-cam.com/video/5WLqNj6ihT4/v-deo.html - Generally, if you model your rail straight and you set it up right, you can use Flowify to bend your shape. Thanks!
wow 👍
:)
Can you provide more information on which extrusion extension you have downloaded? I've not finding the same one you are using in the extension warehouse. Thanks!
The link to the extension is in the notes below the video - it's in the Sketchucation warehouse, not the SketchUp warehouse. Thanks!
hi justin, do we have to pay to create account on sketchucation ?
Excuse me! Could you shear me the link below of "mutiple offset"? I couldn't find it in extension warehouse. Thanks!
I think I linked to it here - www.thesketchupessentials.com/multipleoffsets/
Coooool
:)
Hey I’m a tech ed teacher and really would like to do a lesson where The students take apart a plastic toy and find a piece in it that they could measure and design on sketchup then 3-D print that object. Would this be possible? Let me know what you guys think
I'm not sure why it wouldn't be possible, just would have a bunch of front end setup
TheSketchUpEssentials I appreciate the response. Probably will make a lesson plan and give it a go! Thanks for your help. Your videos are perfect
Everything seems so clear and easy, but impose grid just does not work at all for me sadly :/ even with the simplest of shapes. Maybe something wrong with my plugin?
what if you want to adjust heights in areas of your extrusion? your shape has a vertical dip as the width of the outline narrows. Is it possible to adjust that?
At what point? I'd just adjust the height when I originally created the extrusion with extrude tools