Please don’t listen to the people who criticize you or your work. What you’re doing on YOUR channel is a HUGE help and so interesting. Thank you. Please keep making this content.
I wire houses everyday. I’ve been doing Service changes and remodels for 28 years now. Got a panel upgrade for my parents in the morning and thought I would see how you did yours. Exactly the way I’ve been doing it since day one. I usually have to criticize other electricians work but have nothing but good comments. Great work explaining yourself as well. Thanks
@@gabrielM1111the plug on side goes to the neutral through the buss..the buss is basically extended down the panel so you don’t have to have pigtail coming off breaker to go up to the neutral buss..the plug on neutral eliminates the need for the extra pigtail that normally would connect to the neutral buss..current now is protected on both hot and neutral bc of the plug on neutral..
I would love to work under you without pay for a week just so I can get the training and knowledge, no BS, I never went for my license as an electrician and I've done it for many years, but your videos are awesome and inspiring for me to be a better electrician. One week man, come on!
Yes I would love to do free work just to get my license that was 20 years ago. Now my hands lock up when stripping wires I don't think I could do the work anymore. And climbing ladders into hot attics. Let the younger do that work.73
Dude love the content. You've helped a lot more aspiring apprentices a LOT more than you realize. Speaking of realizations, it's obvious that you were tired in this vid. Don't exhaust yourself for us. Take a day or two off from video editing if you need it. We will understand.
I know you did a Main panel.... but when I was going to replace my Sub-panel in my garage a few years ago.... my electrician buddy told me to raise the new panel about 5 inches to make sure that all the wires coming down would reach the busses and breakers. It was a great tip for me and really did make the install go easier. Great video...!
Yes but some jurisdictions only allow the highest breaker to be 6 foot 7 inches from the ground so thats not always optional, that being said ive raise panels and had to pour a concrete step pad below the panel to satisfy the inspectors needs and the 6'7" regulation.
I greatly appreciate your humbleness and not hiding your faults as we all have a few. Keep up the good work and videos! Your variances in different scenarios are excellent in the description!
Hey Dustin, I'm a retired old guy. But now, I'm going to put in a new service in my old family home. My family has had the place for 69 1/2 years. Anyway, thanks for the refresher course. I just bought the interior 200 amp SquareD panel board at HD this afternoon. It will be a hoot to install. The old panel board coming out of the basement is underneath the first floor bathroom toilet. So, I am rerouting EVERTHING to the front left corner of the house, where it will stay clean and dry, even if the toilet does back up. Talley-Ho!
I watch your videos all the time. They are very informative. I am not an electrician but have a very good understanding and with the help of your videos I installed a reliance controls manual generator transfer switch in my house easy as pie with a few simple electricians tools. Thanks
It’s neat to see the differences in products and methods from the USA to Canada. One of the biggest differences is that I have never installed a house panel outside, yet I see it regularly on videos sourced in the USA. And thanks for keeping it real and telling people that generally this is a full day-job. How many clients have asked me if I am almost done at 1030 am cuz they want to use the microwave for lunch…. Good grief, I probably haven’t even got a bloody knuckle by 1030….
Also no branch circuit wires can pass through the main breaker area. The Canadian panels have a separate cover for the main breaker area or a inner cover.
@@DagarothBlackroseit depends. My experience older areas with detached garages and small homes the panels are outside newer homes with attached garages service usually comes into garage and the main service panel is inside the garage.
I love how Dustin addresses haters and opinionated commenters!!! “I’m in my house, my power is on and everything’s fine!!! When you build your own service, you can do all those pretty things in your service”!!! Honestly, I thought Dustin’s work was neat, professional appearance and especially up to current code standards. I agree that using a bunch of wire nuts to extend the neutrals and/or grounds was unnecessary in his case. He added the conductors to both the neutral and ground busses he installed to insure conductor dependent connections. I also like that he used all copper conductors instead of being cheap and using aluminum conductors.
Clearly, you made excellent choices in terms of neatness and workmanship. Don't forget that thinking through and planning are often just as time-consuming as the job itself.
Now that i got the opportunity just wanted to say thanks man! Thanks to you i was able to prepare to get into the electrical trade started working at a company here in NC for about three months now and still learning and working hard!! ⚡️🤟🏽
Congratulations 🥳 I only do minor repairs... One of my sayings, after repeated zaps🤯... Did I turn the breaker off? "When in doubt, Check it out!"🥇 Stay safe🥳
Not to be a dick but I’m a little worried that watching this video prepared you for that. I would hope you would have helped with a few before hand? Just my opinion.
Dustin! I just want to say how much I love the channel! Been watching a ton of videos the past week or so. I love Code Time. I love your respect for doing the work so well. I'm just a hack home-gamer and you convinced me to buy the NEC book.
Great job working and filming. You did fine. The bonding jumper is so important. It takes little effort and is really not that big of an expense. Perfection ... Keep em coming.
Believe it r not this is when a real electrician shows up... in the heat of pressure ... u said u just do what need to be done to get it pass and tht ur please at the end ... great job
I stumbled across this video while going down the rabbit hole. TL/DR this guy makes it look so easy, which means no way in hell I'm doing it. A bit of detail: We want to have a transfer switch installed. Electrician discovers my home has an old Challenger panel, it's missing the internal cover that hides the wires. So in order to do the upgrade we might need to replace the panel. We probably need to replace the panel. The only good news is the model # isn't a recall panel.
Looks great, love seeing your work. Please consider doing a video on multiple methods to extend short home runs when installing a larger, new service. I assume there are multiple methods to extend too-short home-runs instead of wire nuts. Thanks for your great work!
Hi Dustin, really appreciate your videos and respect the amount of work you put into them. I noticed you didn’t label the conductors so I’m wondering how you knew which conductors were part of the same circuit when you were landing them into the breakers?
The last segment you was on point people will always say coulda,shoulda,woulda but if most of us was half the master you are,we wouldn't have to pay someone to work on our homes.you are the Man DUSTIN.
Great job man! My inspector told me to always learn something new when ya get off work every day. Great to see a different point of view and a lot of times I go “well I’ll be damned.”
Not sure where you're located, but here in So Cal. Our inspection requires us to update the GRC in its entirety, add full home surge suppression, bond hot-cold- and gas. AFCI/GFCI any branch circuit with more then a 6ft extension made to it. Gone are the good old days when a service upgrade only too a day and you made money at the typical rate of around $2-2.4k. I used to love getting these jobs. Now i would love nothing more then to turn them away.
Thanks bud really apreciate this refresher before i go back into electrical. its amazing how rusty you can get just taking 6 months off from electrical. 🤣
The old ground keep it and use that for the inter system bounding terminal block and if those multi branch circuits land to outlets use afci plugs instead of the breakers if you can $20 a pce vs $150+
You baby steps style of teaching is awesome. Got all the information better than the electrician who came to assess the panel install for my remodel home in Mexico. It was all out of code. No ground. No bond. Wires not labeled. Ouch. Thank you.
Dont even know why i watch these videos because im an electrician in the uk, but it is interesting to see how different people do it in other countries
@@victorpine9163 So in your country you run every individual circuit for each breaker from a different panel where the service conductors are? No clue if that's actually how it's done there but sounds like double the work anytime you have to add a new circuit. Where are you from and please describe how a typical service is setup there to where you don't have service conductors in the same panel as the breakers.
This is awesome, man. I'm not an electrician, but an engineer by trade and I'm getting ready to build myself a shop on my property. I'm studying the codebook in preparation to install a 400 amp service so that I can have 200 amps at my shop and house. If you could cover some stuff related to installing 400amp split phase service, I'd be super appreciative. Thanks for all you do, man.
Gotta love slotted screws!!! I too exclusively use Square D, but our green bonding screw is a combination Robertson (square) and slotted (Ontario, Canada), yours looks to be slotted only, looked like your screwdriver jumped off the screw several times? When installing a new panel I tie all my ground bars together, just in case one becomes intermittent. Learned this the hard way when working with PLCs and how they don't like wonky grounds.
Awesome videos man, Im third year in IEC currently, 2nd year apprenticeship. I hope to one day be a Master like you and my uncle. Thanks for sharing your knowledge!
I keep looking at how nice and clean your work is, then I look at the service panel in my basement someone had upgraded before I got the place, and it is a mess. I wish it had been upgraded by someone who takes the pride in it like you do. Your videos keep getting me more excited to get into the trade.
Awesome video. I'm starting as an apprentice tomorrow that subcontracts for an HVAC company. I wanted to just get an idea of the type of projects I'd be working on. Again great video.
Hey Dustin, literally just got my Master's and went out on my own. In your area, when doing a service change, what's the process for doing a service change? Pull permit, call power company then you gotta wait for them to unhook before you can start? Wait for inspector, and call power company back all in the same day?
Love, that you love us [crazy] ppl😂. It’s always easy to critique someone’s work after it’s all done etc.... but when your the person on the other side during a time crunch & juggling diff things.....whole other story😉 So, think for most, we do get it, & thx for the vid AND electrician U Have always enjoyed your vids/channels, & the main thing for me, just love your personality & attitude 😁 Cheers✌🏼
Love your videos, Learning a lot from you. I live in the Northeast and I am curious why the circuit breaker panel is on the outside of the house. I have not seen that practice in the NorthEast. Outside of the labor involved bringing the panel inside, is there any reason why you didn't move the panel inside the house?
Can you make a video about bonding and grounding in the service panel, what do you need exactly, why do i see little green grounding wires coming out of my electrical system?
I think the idea behind the knockout holes is for fire safety i dont know for sure but i do maintenance on a 60 year old building the was highly neglected before me and the new manager got there and im dealing with fire inspectors so im learning so much about fire safety possibly too much lol also i love the vids man your literally a life saver lol
Dude,GREAT videos.I'm sure I'm not alone with this opinion! Question; My house is older and has "Zinsco like" breakers(obsolete). I would like to install a new 200 amp service...OK,now the Q...New box is almost 2X size as present.I'm sure lots of "hots" will be too short. Is extending them with wirenuts and pigtails OK as long as they're within confines of breaker box? I'll be using ground and neutral busses as you just showed us.You're very clear on your content and that's refreshing.
Just started following you on both channels! I think You're putting out great content. I wish I had discovered you when I was a pre apprentice. I am a Journey man now with A TON to learn and A TON to get better at. I plan on watching alot of your stuff to improve myself in this trade. Thanks man keep it up! - Sam (St. Paul MN)
He did do a nice job and a lot of people don't understand that City Ordnance can override NEC Codes like he said more than one way to skin a cat and still pass inspection. You nailed also on adding a buss...
I know this is an older video, but if you happened to read this, I would recommend keeping a trash bucket with you to use as your work. Obviously it keeps the job site clean as your work, but it saves time and effort later having to pickup all the refuse and it looks more professional.
When you were wiring your reds & blacks to each 2 pole breaker, how did you know which red & which black were for each breaker? I didn't see you label them, is why I am asking. Thanks! & awesome videos!!!
As an Australian watching this video it's so interesting the differences between the 2 countries how we do things and the terminology used for different items we call our ground an earth and the breakers we call single pole RCD's ( residual current device ) but anyway it all works in the end
A breaker is not a RCD. An RCD is called a GFCI in the US. Usually the GDCI will be in the outlet, not at that breaker, but you can get breakers with built in GFCI's.
Yeah. Our breakers are just overcurrent protection, and prevent too many amps from going to a circuit. Our RCDs are called GFCIs, (Ground fault circuit interrupter) and are usually inside the wall outlets in our houses, when within a certain distance from a water source. We also have AFCI technology now, which protects against arc faults. AFCI tech is now built into the circuit breakers at the panel, and is included in the SQUARE-D breakers he is installing. The old ZINSCO panel he took out had no such protection, and the breakers were prone to failure due to dissimilar metals inside the panel causing arcs, and melting the breakers in the open position. Every single ZINSCO panel was recalled for replacement. We have an older SQUARE-D panel from 2002 that only has AFCIs on the bedroom breakers, but is much the same to the new design in every other way to the brand new one on this video, the other difference being that ours is on an interior wall.
Thanks for all your hardwork and great videos you do the best and explain the best ever when it comes to electrical! You are like the name Electric University the rest are just school! I learned my electronics in the navy and you have helped me allot learning and converting that to residential especially code and I thank you!
You strike me as a very sharp young man. Good job dude , I been an Electrician for 14 years but have never done a service change. I was always curious what to do if conductors were short , I agree wire nuts are hoky . But I have a question, What do you do if the hot conductors are short ? Wire nut ? Is that a code violation?
Awesome! Great content. Just found your channel and now you got a new subscriber. As of tomorrow, Monday, April 1st 2024, I’ll be installing a new panel in my rental property . I’m upgrading the box from 125 amps of a consolidated company from New Jersey I think, to a 200 amps Square D . I’m not an electrician, little concerned on doing it, no joke( although it’s fool’s day) but I’ll be doing it nonetheless and got tell you that there are a lot of good tips from your channel . Cheers from Texas. 🍺
Cool vid. Neutral Current doesn’t just take back the least path of resistance back to the source and ground; it takes any and all paths back including God forbid a person. That being said landing neutrals on a uninsulated ground bar one step before the grounded conductor (neutral) will cause some current to flow through the can and up the Main Bonding Screw and up the Neutral as well as the bonding jumper you attached from the ground bar to the neutral bus. ME
First of all, great job for service upgrade. Only had a couple questions. But first of all, in New York we put the meter outside and the panel inside (with the 3 ft rule?). You didn't show inside the house. Do you install your branch circuits in a pull box, troff, gutter?... And I understand the 70 percent rule for a nipple 12" or less. But do you have to derate the wires for more than 3 current carrying conductors? ..like I said we normally have the panel in a garage or basement so we just dump all branch circuits into the top of the panel. (No weather proofing or derating required). P.S. winter in N.y. I wouldn't want to go outside to reset a breaker. Lol
Right. Especially filming it and knocking it out in half a work day. Some guys at my company would take 2 and half days to do this between smoking cigarettes and playing on their phone 😂
Looks like a great finished setup to me, but then I don't do this as a job full time to know how it could look better. Even with a bunch of extra time, money, and trips to Home Depot I don't know what could be done to make this look any cleaner or better looking ??? A list of "wish I did that" would be helpful to hear what they are. Nice video, short and to the point 👍🏻
Here in Florida when you install a new service you can not bring all the home runs through one connector, you have to bring them into the new panel with separate Romex conns. two to three per conn. max.
Looking forward to your video on GFCI and AFCI with the NEC 2020 changes and your thoughts on the changes with 220 now being GFCI breakers. Hopefully Square D comes up with a PoN breakers for those down the road. Another note is I've looked at the big box stores and only seen dual function PoN breaker and a AFCI only PoN breakers. We didn't see a spot for GFCI only PoN which in a garage circuit, the AFCI part turned into a pain in the ass with motors constantly tripping the breaker. A friend installed a dual function breaker in his new garage circuits thinking he's be covered with dual and had nothing but issues with the shop vac and his table saw tripping the breakers. He ended up installing a GFCI breaker with a pigtail to avoid the issue. I like the clean look and ease of the install with PoN breakers just wish our big box stores had them in GFCI only.
This is something I need addressed at my house, the main and two subs are all FPE.. two additional things I'd like to add though, is accommodations for solar, and a generator. It seems we lose power 2-3 times per year.. the joys of being at the very end of the line!
it's interesting to see how electrical installs are done over the pond. I'm an electrician in the UK and we've recently started using that style of Distribution board with the Neutral bar ran down with the bus bars for the phases so you don't have the flying leads. in regards to energising a install do you do any form of electrical testing or is it just a case of bang test ? I've just stumbled across your channel and will most likely be on one of those UA-cam deep dives that people do form time to time when they find something they are interested in haha keep up the good work
Its interesting to see how things are done in the states, here in canada thoes neutrals wouldn't connect to a bus on the cabinet, they have to be isolated. Also we have to separate our neutrals and bonds in main panels too. We also put our panels inside, but that could be for a pretty obvious reason😅
🤔, I bet your inspections do a ohm test of the grounding system to make sure that it is up to par, which I hear is notoriously difficult to accomplish. I have seen neutrals that have lost their connection to the service drop and as a result when you load one phase, the other phase will shoot up in voltage. It does not cut the power to the house as you would expect and can be easily missed..
@@TheSuraj03 actually no, on our construction site we just install 1 ground plate with a #6 copper, all the inspectors do is just pull on the wire to se if we actually put a plate in. Technically they can test it but its never happened to us.
@@TheSuraj03 Neutrals that lose their connection is either due to the electrician service feeder side or the lineman underground or overground service side. The grounding electrode and electrode system is only there for lightning protection. The ground that supplies the grounding electrode conductor to the line side transformers on the secondary side, should have grounded the grounded conductor for transients and balance reasons. Technically both sides claim the same I guess in case one or the other fails. If a grounding electrode conducts neutral current, there is objectionable current to fix
Great work! Regarding the neutral bar you added, what size jumper did you use? From what I’ve seen those extra bars are only rated for grounds not neutrals. It would seem the jumper would at least need to be sized for the amps of the panel, not just a 6 or 4 awg
I agree with you, the jumper he used is a 4awg, which is totally undersized for a 200 amp feeder tap. I am really confused why he installed it this way.
Good call out and nicely put on all the guys that can do it better. I laughed so hard I was crying because I know just as well someone was wanting to say why did t you do it this way. 🤣🤣🤣. But any way it looked clean to me. Good job brother 👏
Great video. Learning a lot from your shared expertise thru your channel. I noticed at the end of the video when you put the cover on the panel, the jumper wire from the additional ground bar you installed at the bottom of the panel to link the vertical bus bar on the left at the beginning of the installation is not there. Did you decide it wasn’t needed and removed it?
I have an additional question. Not only do I have to put in a new panel but I have to move it to the other side of my house about 60ft away. What do I do to move everything. I will keep looking on youtube You are amazing and I appreciate your support.
Hey dude, theses are very good videos and very useful. If you're not an instructor or teacher of the trade, you should be. This was very easy to follow. Thank you.
Please don’t listen to the people who criticize you or your work. What you’re doing on YOUR channel is a HUGE help and so interesting. Thank you. Please keep making this content.
I wire houses everyday. I’ve been doing Service changes and remodels for 28 years now. Got a panel upgrade for my parents in the morning and thought I would see how you did yours. Exactly the way I’ve been doing it since day one. I usually have to criticize other electricians work but have nothing but good comments. Great work explaining yourself as well. Thanks
Why did he connect neutrals to the bus if the breakers are the type that take hot & neutral?
@@gabrielM1111the plug on side goes to the neutral through the buss..the buss is basically extended down the panel so you don’t have to have pigtail coming off breaker to go up to the neutral buss..the plug on neutral eliminates the need for the extra pigtail that normally would connect to the neutral buss..current now is protected on both hot and neutral bc of the plug on neutral..
HOW MUCH TO UPGRADE THE PANEL FOR AT HOUSE
I would love to work under you without pay for a week just so I can get the training and knowledge, no BS, I never went for my license as an electrician and I've done it for many years, but your videos are awesome and inspiring for me to be a better electrician. One week man, come on!
go to your local union and apply for their apprenticeship
Tony Fugate...you can come and work for free, for me.....I need some younger muscle to bend 4/0....lol
Yes I would love to do free work just to get my license that was 20 years ago. Now my hands lock up when stripping wires I don't think I could do the work anymore. And climbing ladders into hot attics. Let the younger do that work.73
Dude love the content. You've helped a lot more aspiring apprentices a LOT more than you realize.
Speaking of realizations, it's obvious that you were tired in this vid. Don't exhaust yourself for us. Take a day or two off from video editing if you need it. We will understand.
I know you did a Main panel.... but when I was going to replace my Sub-panel in my garage a few years ago.... my electrician buddy told me to raise the new panel about 5 inches to make sure that all the wires coming down would reach the busses and breakers. It was a great tip for me and really did make the install go easier. Great video...!
Yes but some jurisdictions only allow the highest breaker to be 6 foot 7 inches from the ground so thats not always optional, that being said ive raise panels and had to pour a concrete step pad below the panel to satisfy the inspectors needs and the 6'7" regulation.
And in my panel that needs replacing -- I have wires coming in from both top and bottom, so raising new panel wouldn't help.
I greatly appreciate your humbleness and not hiding your faults as we all have a few. Keep up the good work and videos! Your variances in different scenarios are excellent in the description!
Hey Dustin, I'm a retired old guy. But now, I'm going to put in a new service in my old family home. My family has had the place for 69 1/2 years. Anyway, thanks for the refresher course. I just bought the interior 200 amp SquareD panel board at HD this afternoon. It will be a hoot to install. The old panel board coming out of the basement is underneath the first floor bathroom toilet. So, I am rerouting EVERTHING to the front left corner of the house, where it will stay clean and dry, even if the toilet does back up. Talley-Ho!
I watch your videos all the time. They are very informative. I am not an electrician but have a very good understanding and with the help of your videos I installed a reliance controls manual generator transfer switch in my house easy as pie with a few simple electricians tools. Thanks
It’s neat to see the differences in products and methods from the USA to Canada. One of the biggest differences is that I have never installed a house panel outside, yet I see it regularly on videos sourced in the USA.
And thanks for keeping it real and telling people that generally this is a full day-job. How many clients have asked me if I am almost done at 1030 am cuz they want to use the microwave for lunch…. Good grief, I probably haven’t even got a bloody knuckle by 1030….
I think outside panels are a southern US thing. I've never seen them outside anywhere that gets snow.
Also no branch circuit wires can pass through the main breaker area. The Canadian panels have a separate cover for the main breaker area or a inner cover.
@@DagarothBlackroseit depends. My experience older areas with detached garages and small homes the panels are outside newer homes with attached garages service usually comes into garage and the main service panel is inside the garage.
I love how Dustin addresses haters and opinionated commenters!!! “I’m in my house, my power is on and everything’s fine!!! When you build your own service, you can do all those pretty things in your service”!!! Honestly, I thought Dustin’s work was neat, professional appearance and especially up to current code standards.
I agree that using a bunch of wire nuts to extend the neutrals and/or grounds was unnecessary in his case. He added the conductors to both the neutral and ground busses he installed to insure conductor dependent connections. I also like that he used all copper conductors instead of being cheap and using aluminum conductors.
Clearly, you made excellent choices in terms of neatness and workmanship. Don't forget that thinking through and planning are often just as time-consuming as the job itself.
Now that i got the opportunity just wanted to say thanks man! Thanks to you i was able to prepare to get into the electrical trade started working at a company here in NC for about three months now and still learning and working hard!! ⚡️🤟🏽
Badass dude congrats!
what company? i’m in nc and looking for a new company to apprentice for
Congratulations 🥳 I only do minor repairs... One of my sayings, after repeated zaps🤯...
Did I turn the breaker off?
"When in doubt, Check it out!"🥇
Stay safe🥳
Can we get an update? You still slangin' wire or moved on to something else?
Just curious. 😁
Love how you extended those wires
Doing my first ever service upgrade tomorrow so this was GREAT timing
How did it go?
@@DonkeyLipsDA3rd uh oh I hope hes ok lol
Not to be a dick but I’m a little worried that watching this video prepared you for that. I would hope you would have helped with a few before hand? Just my opinion.
@@jadeekokonios2979 lmfao yeah no sh!t huh? If u need to watch this video to do an upgrade I don't think u should be doing any upgrades....lol
ER?
Dustin! I just want to say how much I love the channel! Been watching a ton of videos the past week or so. I love Code Time. I love your respect for doing the work so well. I'm just a hack home-gamer and you convinced me to buy the NEC book.
The electrician really starts to come out of you towards the end of the video... lol
Great job working and filming. You did fine. The bonding jumper is so important. It takes little effort and is really not that big of an expense. Perfection ... Keep em coming.
Believe it r not this is when a real electrician shows up... in the heat of pressure ... u said u just do what need to be done to get it pass and tht ur please at the end ... great job
I love the fact that you care about the efficiency and cleanliness of cable routing, good work!
All great trades men and women do. It’s really an art behind the work. We take pride in making beautiful efficient work
I stumbled across this video while going down the rabbit hole. TL/DR this guy makes it look so easy, which means no way in hell I'm doing it.
A bit of detail: We want to have a transfer switch installed. Electrician discovers my home has an old Challenger panel, it's missing the internal cover that hides the wires. So in order to do the upgrade we might need to replace the panel. We probably need to replace the panel. The only good news is the model # isn't a recall panel.
Looks great, love seeing your work. Please consider doing a video on multiple methods to extend short home runs when installing a larger, new service. I assume there are multiple methods to extend too-short home-runs instead of wire nuts.
Thanks for your great work!
Incredibly well done presentation, clearly explained and recorded. Bravo. 👏👏👏
Hi Dustin, really appreciate your videos and respect the amount of work you put into them. I noticed you didn’t label the conductors so I’m wondering how you knew which conductors were part of the same circuit when you were landing them into the breakers?
he most likely knew by each pairs length..
I was actually wondering the same thing? But he mentioned if there was a short that the two circuits would activate the two breakers
It’s romex, you can see the conductors together coming out of the outer jacket.
The last segment you was on point people will always say coulda,shoulda,woulda but if most of us was half the master you are,we wouldn't have to pay someone to work on our homes.you are the Man DUSTIN.
Great job man! My inspector told me to always learn something new when ya get off work every day. Great to see a different point of view and a lot of times I go “well I’ll be damned.”
Great advice by him/her.
Not sure where you're located, but here in So Cal. Our inspection requires us to update the GRC in its entirety, add full home surge suppression, bond hot-cold- and gas. AFCI/GFCI any branch circuit with more then a 6ft extension made to it. Gone are the good old days when a service upgrade only too a day and you made money at the typical rate of around $2-2.4k. I used to love getting these jobs. Now i would love nothing more then to turn them away.
Thanks bud really apreciate this refresher before i go back into electrical. its amazing how rusty you can get just taking 6 months off from electrical. 🤣
Screw all haters! You got your code knowledge down and great work on the service upgrade
The old ground keep it and use that for the inter system bounding terminal block and if those multi branch circuits land to outlets use afci plugs instead of the breakers if you can $20 a pce vs $150+
You baby steps style of teaching is awesome. Got all the information better than the electrician who came to assess the panel install for my remodel home in Mexico. It was all out of code. No ground. No bond. Wires not labeled. Ouch. Thank you.
Dont even know why i watch these videos because im an electrician in the uk, but it is interesting to see how different people do it in other countries
Yeah. Like uninsulated screwdrivers...
I'm from Canada and I was thinking the samething
Blows my mind to see the main power accessible in the main area where the breakers are we have to keep service wires and branch separate
@@victorpine9163 So in your country you run every individual circuit for each breaker from a different panel where the service conductors are?
No clue if that's actually how it's done there but sounds like double the work anytime you have to add a new circuit.
Where are you from and please describe how a typical service is setup there to where you don't have service conductors in the same panel as the breakers.
This is awesome, man. I'm not an electrician, but an engineer by trade and I'm getting ready to build myself a shop on my property. I'm studying the codebook in preparation to install a 400 amp service so that I can have 200 amps at my shop and house.
If you could cover some stuff related to installing 400amp split phase service, I'd be super appreciative.
Thanks for all you do, man.
Gotta love slotted screws!!! I too exclusively use Square D, but our green bonding screw is a combination Robertson (square) and slotted (Ontario, Canada), yours looks to be slotted only, looked like your screwdriver jumped off the screw several times? When installing a new panel I tie all my ground bars together, just in case one becomes intermittent. Learned this the hard way when working with PLCs and how they don't like wonky grounds.
Awesome videos man, Im third year in IEC currently, 2nd year apprenticeship. I hope to one day be a Master like you and my uncle. Thanks for sharing your knowledge!
Thanks again !!! AWESOME, AWESOME video!! i appreciate how honest you are! Absolutely no arrogance or cockiness!!
Thanks. I just bought a Square D box and am looking for which side to put the bare ground on and which the neutral. Great presentation.
I keep looking at how nice and clean your work is, then I look at the service panel in my basement someone had upgraded before I got the place, and it is a mess. I wish it had been upgraded by someone who takes the pride in it like you do. Your videos keep getting me more excited to get into the trade.
He pulled all new wiring. More than likely things were added into your system afterwards. ( like his probably will on the left side)
Please next time and moving forward take your time, we wanna see your BEST so WE ALL UNDERSTAND. Thanks again bro.
Awesome video. I'm starting as an apprentice tomorrow that subcontracts for an HVAC company. I wanted to just get an idea of the type of projects I'd be working on. Again great video.
Hey Dustin, literally just got my Master's and went out on my own. In your area, when doing a service change, what's the process for doing a service change? Pull permit, call power company then you gotta wait for them to unhook before you can start? Wait for inspector, and call power company back all in the same day?
Love, that you love us [crazy] ppl😂. It’s always easy to critique someone’s work after it’s all done etc.... but when your the person on the other side during a time crunch & juggling diff things.....whole other story😉
So, think for most, we do get it, & thx for the vid AND electrician U
Have always enjoyed your vids/channels, & the main thing for me, just love your personality & attitude 😁
Cheers✌🏼
Maybe you should make a 3rd video on load balancing and that whole home SPD.
Awesome vid. Dude your sloppy work is much better than most pro work out there.
great video, in Michigan they have us cut the power and hook it back up.
Love your videos, Learning a lot from you. I live in the Northeast and I am curious why the circuit breaker panel is on the outside of the house. I have not seen that practice in the NorthEast. Outside of the labor involved bringing the panel inside, is there any reason why you didn't move the panel inside the house?
In warmer climates, not uncommon to see the panel outside.
Can you make a video about bonding and grounding in the service panel, what do you need exactly, why do i see little green grounding wires coming out of my electrical system?
did you find any good videos ?
I think the idea behind the knockout holes is for fire safety i dont know for sure but i do maintenance on a 60 year old building the was highly neglected before me and the new manager got there and im dealing with fire inspectors so im learning so much about fire safety possibly too much lol also i love the vids man your literally a life saver lol
Nice clean instructions wish all electrician's did clean work like that..
I love the last segment about people's suggestions 😂 fellow electricians can be so bad sometimes
THREE WORDS: Pride and Professionalism!
Dude,GREAT videos.I'm sure I'm not alone with this opinion! Question; My house is older and has "Zinsco like" breakers(obsolete). I would like to install a new 200 amp service...OK,now the Q...New box is almost 2X size as present.I'm sure lots of "hots" will be too short. Is extending them with wirenuts and pigtails OK as long as they're within confines of breaker box? I'll be using ground and neutral busses as you just showed us.You're very clear on your content and that's refreshing.
Great job! I really enjoy the commentary and the Go Pro footage. Thank you for taking the time and sharing your knowledge.
This was awesome. I'm ready for tomorrow now. I still ha questions for grounding so I will got to article 250
Your videos are awesome man! Keep up the work. Not to take away from my schooling but I take away a ton more insight from your videos.
Thank you for your video,
Do you have the video replaced new the Zinsco buss bar circuit breakers ?
Thank you
You make the best Electrical videos…….thanks mate
Just started following you on both channels! I think You're putting out great content. I wish I had discovered you when I was a pre apprentice. I am a Journey man now with A TON to learn and A TON to get better at. I plan on watching alot of your stuff to improve myself in this trade. Thanks man keep it up!
- Sam (St. Paul MN)
The way how you teach its better stay three months with you instead going two years school easy to understand. Thank you for your time
Kinda figured you would address the short conductors this way. Nice job
He did do a nice job and a lot of people don't understand that City Ordnance can override NEC Codes like he said more than one way to skin a cat and still pass inspection. You nailed also on adding a buss...
@@steve-o6413 lol I was just re-reading your comment from the other vid. We all have our tendencies n preferences
@@steve-o6413 that said, inspectors also differ in preference 🥴
I know this is an older video, but if you happened to read this, I would recommend keeping a trash bucket with you to use as your work. Obviously it keeps the job site clean as your work, but it saves time and effort later having to pickup all the refuse and it looks more professional.
Another excellent example of craftsmanship and great video!
When you were wiring your reds & blacks to each 2 pole breaker, how did you know which red & which black were for each breaker?
I didn't see you label them, is why I am asking.
Thanks! & awesome videos!!!
Dustin, you did a great job. No I’m not an eletrichicken, I do ada stuff but I see a good job.
As an Australian watching this video it's so interesting the differences between the 2 countries how we do things and the terminology used for different items we call our ground an earth and the breakers we call single pole RCD's ( residual current device ) but anyway it all works in the end
A breaker is not a RCD. An RCD is called a GFCI in the US. Usually the GDCI will be in the outlet, not at that breaker, but you can get breakers with built in GFCI's.
Yeah. Our breakers are just overcurrent protection, and prevent too many amps from going to a circuit. Our RCDs are called GFCIs, (Ground fault circuit interrupter) and are usually inside the wall outlets in our houses, when within a certain distance from a water source. We also have AFCI technology now, which protects against arc faults. AFCI tech is now built into the circuit breakers at the panel, and is included in the SQUARE-D breakers he is installing. The old ZINSCO panel he took out had no such protection, and the breakers were prone to failure due to dissimilar metals inside the panel causing arcs, and melting the breakers in the open position. Every single ZINSCO panel was recalled for replacement. We have an older SQUARE-D panel from 2002 that only has AFCIs on the bedroom breakers, but is much the same to the new design in every other way to the brand new one on this video, the other difference being that ours is on an interior wall.
Thanks for all your hardwork and great videos you do the best and explain the best ever when it comes to electrical! You are like the name Electric University the rest are just school!
I learned my electronics in the navy and you have helped me allot learning and converting that to residential especially code and I thank you!
You strike me as a very sharp young man. Good job dude , I been an Electrician for 14 years but have never done a service change. I was always curious what to do if conductors were short , I agree wire nuts are hoky . But I have a question, What do you do if the hot conductors are short ? Wire nut ? Is that a code violation?
Awesome! Great content. Just found your channel and now you got a new subscriber. As of tomorrow, Monday, April 1st 2024, I’ll be installing a new panel in my rental property . I’m upgrading the box from 125 amps of a consolidated company from New Jersey I think, to a 200 amps Square D .
I’m not an electrician, little concerned on doing it, no joke( although it’s fool’s day) but I’ll be doing it nonetheless and got tell you that there are a lot of good tips from your channel . Cheers from Texas. 🍺
Cool vid. Neutral Current doesn’t just take back the least path of resistance back to the source and ground; it takes any and all paths back including God forbid a person. That being said landing neutrals on a uninsulated ground bar one step before the grounded conductor (neutral) will cause some current to flow through the can and up the Main Bonding Screw and up the Neutral as well as the bonding jumper you attached from the ground bar to the neutral bus. ME
That's a nice installation and equipment.
Looked great to me! I like all the detail and code references.
Like the idea of moving the Bus .
First of all, great job for service upgrade.
Only had a couple questions. But first of all, in New York we put the meter outside and the panel inside (with the 3 ft rule?).
You didn't show inside the house.
Do you install your branch circuits in a pull box, troff, gutter?... And I understand the 70 percent rule for a nipple 12" or less. But do you have to derate the wires for more than 3 current carrying conductors? ..like I said we normally have the panel in a garage or basement so we just dump all branch circuits into the top of the panel. (No weather proofing or derating required). P.S. winter in N.y. I wouldn't want to go outside to reset a breaker. Lol
Lucky you the panel,is outside well lit unlike our basement version that is all rusted
I think this is actually great stuff. I didn't know about the 2 pole arc fault breaker specially for shared neutrals.
Kick ass man. Next time you are up in these parts let me know.
Also keep up the exceptional work.
Dustin: I could've done a much better job if I had had time.
Everyone: Yeah. It looks like garbage. /s
Dude. Seriously. Awesome work.
Right. Especially filming it and knocking it out in half a work day. Some guys at my company would take 2 and half days to do this between smoking cigarettes and playing on their phone 😂
Man you do a great job with everything. I really enjoy watching your videos; even thou, I’m more industrial
Looks like a great finished setup to me, but then I don't do this as a job full time to know how it could look better. Even with a bunch of extra time, money, and trips to Home Depot I don't know what could be done to make this look any cleaner or better looking ??? A list of "wish I did that" would be helpful to hear what they are. Nice video, short and to the point 👍🏻
Nice video. And a pretty funny ending calling out the critics before they even get started.😆😆
In your opinion using Romex with all the hot conductors, neutral conductors wrap wire around them to keep each separated.
Here in Florida when you install a new service you can not bring all the home runs through one connector, you have to bring them into the new panel with separate Romex conns. two to three per conn. max.
Looking forward to your video on GFCI and AFCI with the NEC 2020 changes and your thoughts on the changes with 220 now being GFCI breakers. Hopefully Square D comes up with a PoN breakers for those down the road.
Another note is I've looked at the big box stores and only seen dual function PoN breaker and a AFCI only PoN breakers. We didn't see a spot for GFCI only PoN which in a garage circuit, the AFCI part turned into a pain in the ass with motors constantly tripping the breaker. A friend installed a dual function breaker in his new garage circuits thinking he's be covered with dual and had nothing but issues with the shop vac and his table saw tripping the breakers. He ended up installing a GFCI breaker with a pigtail to avoid the issue. I like the clean look and ease of the install with PoN breakers just wish our big box stores had them in GFCI only.
This is something I need addressed at my house, the main and two subs are all FPE.. two additional things I'd like to add though, is accommodations for solar, and a generator. It seems we lose power 2-3 times per year.. the joys of being at the very end of the line!
it's interesting to see how electrical installs are done over the pond. I'm an electrician in the UK and we've recently started using that style of Distribution board with the Neutral bar ran down with the bus bars for the phases so you don't have the flying leads. in regards to energising a install do you do any form of electrical testing or is it just a case of bang test ? I've just stumbled across your channel and will most likely be on one of those UA-cam deep dives that people do form time to time when they find something they are interested in haha keep up the good work
Its interesting to see how things are done in the states, here in canada thoes neutrals wouldn't connect to a bus on the cabinet, they have to be isolated. Also we have to separate our neutrals and bonds in main panels too. We also put our panels inside, but that could be for a pretty obvious reason😅
🤔, I bet your inspections do a ohm test of the grounding system to make sure that it is up to par, which I hear is notoriously difficult to accomplish.
I have seen neutrals that have lost their connection to the service drop and as a result when you load one phase, the other phase will shoot up in voltage. It does not cut the power to the house as you would expect and can be easily missed..
@@TheSuraj03 actually no, on our construction site we just install 1 ground plate with a #6 copper, all the inspectors do is just pull on the wire to se if we actually put a plate in. Technically they can test it but its never happened to us.
@@TheSuraj03 Neutrals that lose their connection is either due to the electrician service feeder side or the lineman underground or overground service side. The grounding electrode and electrode system is only there for lightning protection. The ground that supplies the grounding electrode conductor to the line side transformers on the secondary side, should have grounded the grounded conductor for transients and balance reasons. Technically both sides claim the same I guess in case one or the other fails. If a grounding electrode conducts neutral current, there is objectionable current to fix
Great work! Regarding the neutral bar you added, what size jumper did you use? From what I’ve seen those extra bars are only rated for grounds not neutrals. It would seem the jumper would at least need to be sized for the amps of the panel, not just a 6 or 4 awg
I agree with you, the jumper he used is a 4awg, which is totally undersized for a 200 amp feeder tap. I am really confused why he installed it this way.
Thank for this vedio. Can I replace service disconnect panel myself?
Dustin: We did not address the SHORT hot conductor issue mentioned in Part 1 video?
Ok so it wasn’t just me
At what minute?
2:10
Ted Lahm, Yes he did, he added a nuetral bar and bonded it to the main neutral bus bar, same thing with the ground wires.
Looking forward to the video on arc fault and GFIs. Enjoying the videos. Thank you
Good call out and nicely put on all the guys that can do it better. I laughed so hard I was crying because I know just as well someone was wanting to say why did t you do it this way. 🤣🤣🤣. But any way it looked clean to me. Good job brother 👏
Great video. Learning a lot from your shared expertise thru your channel. I noticed at the end of the video when you put the cover on the panel, the jumper wire from the additional ground bar you installed at the bottom of the panel to link the vertical bus bar on the left at the beginning of the installation is not there. Did you decide it wasn’t needed and removed it?
I have an additional question. Not only do I have to put in a new panel but I have to move it to the other side of my house about 60ft away. What do I do to move everything. I will keep looking on youtube You are amazing and I appreciate your support.
Great Video.....was waiting for this after I watched part one and great work as always
Awesome video. How come you had all the breakers on the right? Shouldn't both sides be balanced?
Good video, Thank you, where do you get the new meter can?
Your channel is fantastic. Thanks for all the hard work brother.
That's nice to hear! Thanks for watching!
Hey dude, theses are very good videos and very useful. If you're not an instructor or teacher of the trade, you should be. This was very easy to follow. Thank you.
Do you have a video on sub panel installation? In particular adding one to a building with a main already? You've got to but I can't find one.
Love the content. Question though unrelated to electrical. Why do you wear your watch underneath your wrist?
Very clear and well explained