How to build the ULTIMATE car in Tears of the Kingdom!
Вставка
- Опубліковано 13 бер 2024
- Thanks to Efficient_Demand5759 for the collaboration on Hank the Tank!
Thanks to @BlazeAlchemist991 for the building tips!
Check out @irachnida's guide to fuse entanglement in 1.2.1 • New, EASIEST 1.2.1 Fus...
Gravity nudging:
/ tutorial_gravity_press...
www.reddit.com/r/HyruleEngine...
Conga turret tutorial at the end of this video: • TotK Special Anniversa...
Conga turret and turret info: / discord
Hank the Tank videos:
• My favorite land vehic...
• Hank the Tank Build Gu...
• Zooming around the Eld...
#zelda #tearsofthekingdom #hyruleengineering #ev #tank
This legendary vehicle, carefully crafted, finally gets published officially 10 months after the launch of TOTK!!!🎉🎉🎉
as a wise man once said:
"Gas gas gas"
Manuel Caramori. May his soul rest in peace.
@@arielicandy267 oh he died? damn all respects go to him and his family.
Love your work, man. Well done. And thanks for sharing your design.
Amazing work,
I heavily appreciate the audio guide. Is there any way to build a "poor man's" version without glitches? I have monke brain, and will do this wrong lol
I built one by stake nudging the two big wheels to fit the motor between, then I managed to get the gravity pressed wheel down using a big iron block. I don't want to attempt the FE glitch. The middle wheel might not be able to flex enough if it isn't sitting lower, but you could just attach the big wheel in the middle on the bottom of the plate and try your luck. I had to stake nudge the middle wheel for like an hour in the plate so it wouldn't be all crooked. There are other no-glitch builds, but they fall apart too easily and they're just as tedious to build IMO.
I built a version of this without the FE big wheels, and it does alright. It's not as fast as the one in the video, but it still moves decently fast. I added some small wheels on top of the big wheel in the center to keep it from bouncing around so much. It climbs hills no problem, and I drove it all over the Gerudo desert and the Hebra mountains without too many hiccups. Make sure to attach dragon parts in case it goes flying down a hill!
I have a question about it.
Does it go a lot slower or almost unoticable?
@@shadow2210kWell, the wheels are stake nudged apart with the electric motors inside, so it's a little bit slower, but still faster than just regular big wheels. I think the plate slows it down a bit because of how heavy it is. In all of my other builds I use the railing from the right leg depot as the frame. I might try fuse entanglement at some point, but it just looks so tedious that I'd rather not if I can help it!
@@jamescrumbaker3169 ok, thank you for the response.
I was just working my way through a significantly dumber version of this build. Excellent explanation thank you!
Tank science and engineering 👍
I would wait for the release of cai😂 I gave up building when I realise the height of others' building technique
You can find the cai for Hank_3 in the Hyrule Engineering discord discord.com/channels/1111875355758837830/1191093814568439809/1213203481955930253
Edit 2: finally done. It was very hard and took me like hour and a half. Had to fuse the motor back to the wheel when in culled state by stepping back to make it visible then after that had to blind align the staked wheel once i had the motor disappear without breaking off and took many tries to get both the height and side alignment to be perfect or almost perfect. But I finally have the axel that’s on 7:15. I gotta say that anyone trying this build needs to do the fuse entangled axel first and then go with the gravity pressing which is easier.
Edit: so i have a fuse entangled motor shield and used the fused entangled motor to make the first part of the axle but when i go back to the area to make the motor disappear it does disappear but it also disconnects and disappears from the entire build.
I got a question. The fuse entangled shield has to be entangled beforehand with a motor? I’m confused on that part maybe include the new super quick FE method in the vid. Cause the motor won’t disappear at all. It confuses me because you drop a shield that does not look fused entangled.
Appreciate the build and looks fast and torquey.
Yeah you gotta FE the motor to the shield. The shield will look empty and the motor will be on the ground next to you. In the menu, the shield will show a motor fused to it. Drop this shield in the culling room and the irl motor should dissappear as you walk away from the culling room
why a star fragment? i cant find the answer anywhere. and thank you for the build guide! ive been waiting for this!
Star fragment serves as a speedometer and mounting point for the turret.
Star frags are used as a sort of speedometer, here it's doubling as a wep mount. In previous iterations a sand seal statue was used as a mount, but this keeps the item count down to make room for weaponry.
It acts a speedometer, since it produces a light trail once it reaches 25 m/s .
Hi,how do you build the exact turret you used in the video, i really like it. If you see this please respond. (If you have any channel links to it in hyrule engineering server)
It's a great turret! Here is a link to a quick guide on making a conga turret. You may need to make small adjustments, but this method gets you 95% there discord.com/channels/1111875355758837830/1131765202392711341/1151517491189780521
Edit: the pressed beams are difficult in vanilla. You can either use phantom beams, culling, or pressing to push them together. Nothing wrong with an O or + design on top too, though
@@chesepuf thank you so much!
Can this climb vertical surfaces?
2:41 Can you do this in 1.2.1?
Hello, I've gone through the process of building Hank, and I have a problem: my joncons vibrate aggressively when using this vehicle can you tell me why is that?
It's probably the middle wheel smacking the motors. If it looks like the middle wheel is bouncing up and down a lot, you should adjust its position slightly up or down. You want to get it like in my videos where the middle wheel is pretty locked in place.
@@chesepufok, I just got back to 1.0 so once I get to certain point in the game I'ma build Hank again!
@@shadow2210k Excellent! Good luck in your building journey!
@@chesepuf thanks!
Culling is patched in 1.21 how im build this?
Culling still works just like I show, but fuse entanglement is a little different. Check out the video description for irachnid's guide on FE in 1.2.1. You can use the same house for FE that I use in the video for culling
What version are you in?
I'm on 1.1.0, so regular Fuse Entanglement (FE) works for me. Check the description for a method to FE on 1.2.1, if that doesn't work for you then use the gravity nudging method in the description
Hey there
I dont like this. Feels like glitching the game