Hello, my brother has a 2013 Ford Focus SE also. Did the procedure and did not even have to wait 15 sec. Once we turned on the vehicle and put it into neutral it showed Transmission ready. Thank You it worked great and the vehicle is running just as before.
@@mejhon6592 Yes it was not wanting to shift gears sometimes when you start it up. Turn it off, do this reset, usually fixes it for a while but then it starts up again later on.
FYI: Ford extended the warranty on 2012-2016 Ford Focus to cover replacement of Transmission Control Module (TCM) to 10 years or 150,000 miles. If your transmission is slipping, contact a dealership and they can run a diagnostic on your TCM and if it is faulty they will replace it for free. Just tell them you want to schedule service for the Customer Satisfaction Program 14M02.
@@nomad1764I rung them with my 2013 model and they said I was just out of the warranty cos my build date was in April (I called in may). $1.5k to get the tcm replaced, labour and all
PARTS ARE NOT COVERED and they will tell you "its a part" Ford in Greico Fort Lauderdale ( wanted $$4000) from me to fixed the lever . I was so frustrated I called Ford: and this is how i learned about this. btw: worst car dealer on the planet. the staff sucks. --✭ --negative 934,044 vs. I took my infinite suv to infinite dealer = opposite services ✭ ✮ ✯ ✰ ★
I have a 2013 ford focus and I’ve been having problems for weeks! The rpm would go all crazy and when I step on it it would stop, at times it struggled to turn on too. Searched up a video and found this one and it 100% worked!! Thank you so much!!
Wow it really freaking workd out hace a 2012 ford focus and 2nd gear was no goong in so right but i did this steps and boom everything is working fine nice video i went to a mechanic and he told me that i had to waste like 800 dllrs but with this video a saved 800 dlrs thanks
Thanks for this, it worked. I got the shift fork unstuck with break cleaner and flushed the transmission with wd-40 after drilling two holes. After clearing the code and doing this, the car shifts great.
No way ! My Ford focus start it acting up yesterday and didn’t wanna back up in reverse and I did this and works thank you your life saver !!! But does anyone know on this comments like it’s the car fix for good if we do this or what ?
Can confirm this worked on my 2014 Ford Focus SE, mine wasn't shifting past the first gear and had a check engine light on, doing this worked and got rid of the engine light too!
Same I have a 2014 focus SE and all the sudden the check engine light came on and wouldn't go into reverse and would have a hard time going into first. We did this today and the engine light went off and drove perfectly.
@@cky2kdunn I must’ve done it wrong it didn’t work for me. Took it to the mechanic and they told me I need to replace a transmission part that’s on back order.
Thanks a ton, this video really helped, only on my 2013 Ford Focus SE I only needed to turn the key on once and put it in Neutral for 15 seconds to get the “transmission ready” message. Now my car is running perfectly!
@@hiwa1277the control module (whatever it’s called, cant remember atm) is the problem I think. Basically the computer that tells the car when to shift. Probably why a reset helps. Look into recalls on ford focus and you can see what the common problems are with the make and model. Put in the VIN and can see if they have been fixed in the past and if not, some are free to replace. Call your Ford Dealership for more info after online check
Ok guys am backing this up it actually works it resets your transmission but keep in mind you still have to replace your actuators A & B no matter what
This didn't work in my 2013 UK ford focus after a battery drain. The car was stuck in limp mode. However, a neighbour dropped off an Autel MS309 data reader. I scanned for errors and they were none but I still pressed clear errors and now I can go through the gears smoothly with normal changes. Hope this helps people because this just saved me a trip to the garage.
Thanks Bro! You're the goat. My battery died, and had a transmission fault message after battery change. I reset it, after 3 attempts until i got this message! 👍
First off, thank you for this tip. Fixes my issue but Just a heads up: I’ve found that you only have to do the first 3 steps and that’ll do it. At least for me, after putting car to N after turning key the message pops up 🤷🏽♂️
Worked so far, will give an update to see if the problem returns during the week. Thank you so much . Before TCM error , struggled to shift and no reverse.
Hey there, can you give any updates on the issue? What recall are you speaking of,and is Ford paying for it? I recently purchased a 2013 focus and after about 1,000 miles my transmission is giving me fits. I appreciate it any help or advice.
@dwjackson903 when the check engine light went on and did the code reader it was the TCM code. You need that warning for the recall. My appointment isn't till may 3rd but went into Ford in person and they said its covered under manufacturer warranty (recall) , however the part is back ordered for over a year and cars have just sat on the lot
@@kentheman5 WTH do they do to accommodate you in the meantime seeing how we are left without a vehicle after we placed our money and trust in a company that literally was founded upon making a quality product for the working man to rely on to get the job done, fast-forward a century of research and development and this is the best solution they have??
Chad, if you have a focus please look up on youtube "clean ford focus actuators" it solved literally all of my transmission issues. Just in case you run into any more trouble like hitching, hesitation, shifting from 1st to 3rd to 5th, or shifting super hard. This will fix that. Just spreading the word as it only costs what brake cleaner costs.
@@NaviYT oh wait I did this on a 2013 ford escape and it did work for it and yes I do have a terrible hesitation at times it's even dangerous when pulling into traffic I almost have to floor it before it moves and then takes off like a rocket, not the best way to drive. I'm talking about my escape, I just looked for the video on the actuator for the focus I take it they're the same for both vehicles and I couldn't find it could you please clarify what I would do or look up. For the escape that is.
@@chadbosko8935 I have not seen it for the escape, are you looking for a video explaining this on a focus? I know where to find that and I can link that, sadly idk if it's the same for the escape but I imagine so
Thank you. It worked. I went to the dealership to see the problem, they were charging me $100 just for a diagnose, and said that you need a new clutch, that we cost me $3000😅
This 100% works BUT temporary! For anyone having tcm problemes with their ford and is waiting to repair it, just reset the tcm everytime you’re going to drive and you should be pk
Hey everyone, to piggy back off Charles here. If you have a focus please look up on youtube "clean ford focus actuators" it solved literally all of my transmission issues. I'm not sure how temporary the fix is, but it makes sense that a dirty transmission is going to have issues. Cleaning the shift actuators with brake cleaner did the trick for most if not all of my transmission issues. The sooner the better because if they get too stuck, it's going to snap one of your shift forks. The first symptom is one of your two clutches getting stuck engaged or disengaged
@@BruceLigno In my case the opposite actuator to the one that does reverse was messing up. If it were the actuator then yes I would be having reverse issues. Same issue except for me, my good gears are: stuttery 1st gear, 2nd, and then skips 3rd goes to 4th. If I were having issues with my other actuator then I wouldn't be able to go into reverse. There's a thread where i helped someone diagnose and fix this issue. They did not have reverse gear.
@@BruceLigno Please look at Chris Murphy's Comment and it's reply section on this video that we're commenting on. The one with 33 replies. That's where I was able to help someone get their reverse gear back and their car running and driving again.
thanks for posting this comment! That's really good advice. I'm going to try to spread the word about these actuators. Cleaning them fixed what ford quoted me $1500 for. (quoted me new forks, and the works) all it needed was a good cleaning
@@prueensgloria4743 It can return but that's cause the original issue is the clutch kicking up too much dust. In turn, everything gets gunked up inside. It's worth doing no doubt. If you don't eventually do it. Your clutch will get stuck and you'll end up either breaking a fork or burning out an actuator completely.
Once it says transmission ready, what can we expect after that? do we then start the car in full and drive it normally or are there more steps after? DOes this just reset to the OEM standard and the car will drive normally again?
Oh my gee… I have a 2014 Ford focus SE titanium push start . do not start your car up completely. Just push the button to turn your car on when he says to turn your car on then follow his instructions but remember to not fully turn your car on. But mine said transmission ready… I pray to God this works.. I got a message on my vehicle last night. That transmission was hot. Pull over wait five minutes.. I work for Uber and I listened to a bunch of videos last night, but I had four gigantic men get in my car last night, and I could literally fill my car just sink down . Easily 1300 pounds was sitting in my vehicle. I drove them to Fort Worth because they were partying at the clubs. And in that area there are hills you kinda have to go up and down small ones. Anyway I was almost there to their destination and I got the message warning, trans transmission hot pull over and wait pull over stop wait five minutes…. Well, I waited 30 minutes. I was 25 miles from my home. But driving home I had no issues.. at 80,000 miles my transmission went out and I had it replaced for $2500. And my car is not slipping, gears or anything like that I just had that warning message show up on my screen. But I just followed his directions and it said transmission ready so I reset my transmission. I again thank you so much.
Work Great thanks. Just an in info i drilled top hole 5mm from lef side insde where actuator. Which mean inside when you put back actuator cover top holes. Saving from water and dirts goes inside Case 😂
Im confused at the end of vid i keep doing exactly what he is doing and im not getting anything 😅 ? Are switching back on put in nuteral and what another 16 sec then tunr on ????
My 2016 Mondeo had 163000.00 miles on it and the issue I have from around 45000 miles is that it goes into a sort of safe mode where on the dash says `see owners manual ` , the way I get over this is to pull over as the car will not excellerate as it cannot select the next gesar - I will pull over and turn the car off and wait for 20 ish seconds and then turn it back on and it resets the computer and then I drive off until it happens agan - it may not happen again for thousands of miles or may be just 1 mile - any thoughts guys - Cheers (UK)
Was getting DTC P073F on my 2012 fiesta. Did this and the code went away. Before i could see on my DTC scanner live data that when i would take off from a stop it would start in 2nd, after doing this it now starts in 1st as it should.
Mine is a 2016 Ford Focus My Transmission Shudders at Take Off, after about 30 of Driving... It also Shudders at Take Off after making a few stops at different places - and shutting my car off at those places, then turning it back on after I leave a place. It will begin Shuddering at Take Off.
How are you changing gears with the key off? To change gears on mine I have to have the key on and my foot on the brake. This is a safety mechanism in all cars so kids or a passenger cant slide it out of park and have the car roll away!
@@chirristruck7974 en el AutoZone lo pueden hacer? ví algo en internet Hacer lo de la palanca y después desconectar la batería y conectarla de nuevo voy a probar
@@adrianverdugo6846 no en AutoZone el scaner no sirve para nada nomás es para detectar fallas,ve con un mecánico de confianza que tenga scanner y pídele el scanneo completo y que los borre
I am still unclear as to what the issue was that the transmission needed to be reset for, can you please share what this solved? Will it solve a transmission overheating? Any potential solutions for that?
I have a 2012 fucken tcm recall ford can’t get the part shifts like trash sometimes resetting it fixes it or disconnecting the battery temp fixes but the check engine light always come back for the same thing transmission control module or it comes up soemtimes as bad clutch actuator a or b which from talking with ford is the same codes it’s cause the tcm is straight booty and fails and ford doesn’t wanna fix them
@@wislydauphin7645 mine was shifting 1st to 3rd to 5th and sounded awful during acceleration. Cleaning those fixed all my issues for the price of brake cleaner and E10 torx socket
I have a 2012 plate. It wouldn't shift to sports mode. Lost power while trying to drive and got stuck in the road because didn't want to move. Recovery man tested it said was tcm and reset it. Now wondering how long til goes funny again because garage got it from won't fix it as said nothing is wrong or showing fault codes
To everyone below, you do know you need to replace the dual clutch transmission fluid right?? Resetting it won’t fix it. NO SUCH THING as a lifetime fill on any fluid. Oils breakdown from friction, heat cycling, and age. Triax has a cheap fluid for DCT.
The last step: turn it back on, then put in neutral. you're right he doesn't explain it clearly, but if you back up the video and watch it carefully you can see that when he turns it on it's still in park... then he puts it in neutral... there is a pause and then the screen reads transmission ready
Go put ur fiesta in neutral and turn the key off it will always say transmission ready look in owner’s manual it’s says that for flat towing that’s all it is it’s no transmission reset
El título y la descripción del video están en inglés. Puede ver fácilmente lo que está haciendo para restablecer la TM, además, esta es una solución temporal. Es posible que deba reemplazar o actualizar su TCM.
I used scanner and delete errors twice a day for 2.5 weeks , was just about to order Chinese TCM when suddenly car did not pop up the red light and it went back to normal
QR, busca en youtube "clean ford focus actuators". Literalmente, me arreglo todos las problemas que ha tenido con mi focus. Ojala que te sirve at ti tambien
am i the only one with a focus that nothing will work for it, i tried this a million times it doesn’t work. the car will never reverse and the transmission will never reset, even with an autel scanner i tried to reset it and it gets stuck at 80% and will be stuck there for over an hour. i tried disconnecting and reconnecting the battery and trying the reset still nothing. the focus is the biggest piece of shit u can buy. the transmission is a pile of shit, the rest of the car is good the transmission tho ? dog shit.
Likely your actuators. Get new ones and install. Before installing look up how to run the forks in and out while lubing - Unless your clutch is really bad, this works.
Hello, my brother has a 2013 Ford Focus SE also. Did the procedure and did not even have to wait 15 sec. Once we turned on the vehicle and put it into neutral it showed Transmission ready. Thank You it worked great and the vehicle is running just as before.
You had problems with the transmission
Thank you! Transmissions in these cars are terrible, that temporarily fixed the issue much appreciated.
You had problems with the transmissiin?
@@mejhon6592 Yes it was not wanting to shift gears sometimes when you start it up. Turn it off, do this reset, usually fixes it for a while but then it starts up again later on.
@@craigforster8685mi carro no da la reversa, como lo reseteo? Es un for Focus hatchback 2018, hice esto pero no funcionó 😢
FYI: Ford extended the warranty on 2012-2016 Ford Focus to cover replacement of Transmission Control Module (TCM) to 10 years or 150,000 miles. If your transmission is slipping, contact a dealership and they can run a diagnostic on your TCM and if it is faulty they will replace it for free. Just tell them you want to schedule service for the Customer Satisfaction Program 14M02.
Damn. Mine is 2012 with 196,000. Probably not gonna fix that are they ?
@@nomad1764I rung them with my 2013 model and they said I was just out of the warranty cos my build date was in April (I called in may). $1.5k to get the tcm replaced, labour and all
Hi bro you tolk service for tcm
Would hanging first gearthen hard shift.. just started tonight. My wife is freaking out. Could the time be related to this?
PARTS ARE NOT COVERED and they will tell you "its a part" Ford in Greico Fort Lauderdale ( wanted $$4000) from me to fixed the lever .
I was so frustrated I called Ford: and this is how i learned about this.
btw: worst car dealer on the planet. the staff sucks. --✭ --negative 934,044
vs. I took my infinite suv to infinite dealer = opposite services ✭ ✮ ✯ ✰ ★
I have a 2013 ford focus and I’ve been having problems for weeks! The rpm would go all crazy and when I step on it it would stop, at times it struggled to turn on too. Searched up a video and found this one and it 100% worked!! Thank you so much!!
Bro you have saved me so many times. Thanks for posting this.
10000% works!! Thank you so much!!! Saved me tons of money and time!
Wow it really freaking workd out hace a 2012 ford focus and 2nd gear was no goong in so right but i did this steps and boom everything is working fine nice video i went to a mechanic and he told me that i had to waste like 800 dllrs but with this video a saved 800 dlrs thanks
I have a second gear clutch slip sounds exactly like your problem. I will try this tmrw and let you know ❤
@@MosheSabaah so did it work for you its been a month now thanks
Nhuyyyyy I love this so much I love @@MosheSabaahap vgLPoiyyttt I eeeexfefv4 dt#3=
Thanks for this, it worked. I got the shift fork unstuck with break cleaner and flushed the transmission with wd-40 after drilling two holes. After clearing the code and doing this, the car shifts great.
thank you genuinely, i got so many issues right now and this helped get the engine light out. i’m going to test out everything tmr but thank you
This worked on a 2015 se ford focus! Got reverse back! THANK YOU 👏🏼👏🏼👏🏼👏🏼👏🏼👍😊
No way ! My Ford focus start it acting up yesterday and didn’t wanna back up in reverse and I did this and works thank you your life saver !!! But does anyone know on this comments like it’s the car fix for good if we do this or what ?
Can confirm this worked on my 2014 Ford Focus SE, mine wasn't shifting past the first gear and had a check engine light on, doing this worked and got rid of the engine light too!
Thanks this gives me hope. I’ve been so stressed about my car
@@Milkugh I swear bro😂😂
Same I have a 2014 focus SE and all the sudden the check engine light came on and wouldn't go into reverse and would have a hard time going into first. We did this today and the engine light went off and drove perfectly.
@@cky2kdunn I must’ve done it wrong it didn’t work for me. Took it to the mechanic and they told me I need to replace a transmission part that’s on back order.
Its probably only gonna work for a couple of days because your problem is probably shift actuator b which only is 30 dollars to fix
This works 100% thanks dude appreciate it. You describe it better in this video than ford does in the manual.
That's exactly what I said. Perfect explanation car is back on the road.
Thank you so much for this. Seems to have helped on our 2011. The car now shifts!
This worked on my 2014 ford focus
What kinda issues you had?
Thanks a ton, this video really helped, only on my 2013 Ford Focus SE I only needed to turn the key on once and put it in Neutral for 15 seconds to get the “transmission ready” message. Now my car is running perfectly!
Can you help me with what was the fault before?
Because mine is just keeps pulling forward in any gear NRDP
You didnt have more problems with transmission?
@@hiwa1277the control module (whatever it’s called, cant remember atm) is the problem I think. Basically the computer that tells the car when to shift. Probably why a reset helps. Look into recalls on ford focus and you can see what the common problems are with the make and model. Put in the VIN and can see if they have been fixed in the past and if not, some are free to replace. Call your Ford Dealership for more info after online check
Mine did the same thing on my 2014
Ok guys am backing this up it actually works it resets your transmission but keep in mind you still have to replace your actuators A & B no matter what
This didn't work in my 2013 UK ford focus after a battery drain. The car was stuck in limp mode. However, a neighbour dropped off an Autel MS309 data reader. I scanned for errors and they were none but I still pressed clear errors and now I can go through the gears smoothly with normal changes. Hope this helps people because this just saved me a trip to the garage.
Update since someone just liked. The car has been working flawlessly since I did this. It looks like RS components sell the Autel data reader for £28
Please share link, I just bought a 2012 ford focus, this command doesn’t work and it jerks at low speed.
I did it once and it fixed your totally awesome dude!!!
Thanks Bro! You're the goat. My battery died, and had a transmission fault message after battery change. I reset it, after 3 attempts until i got this message! 👍
I’m having that same message after changing a fuel pressure sensor
@@carlosway19😮
First off, thank you for this tip. Fixes my issue but Just a heads up: I’ve found that you only have to do the first 3 steps and that’ll do it. At least for me, after putting car to N after turning key the message pops up 🤷🏽♂️
Worked so far, will give an update to see if the problem returns during the week. Thank you so much . Before TCM error , struggled to shift and no reverse.
worked for about a day , then reverts back after 10 min. Recommend going to the dealer its a RECALL
Hey there, can you give any updates on the issue? What recall are you speaking of,and is Ford paying for it? I recently purchased a 2013 focus and after about 1,000 miles my transmission is giving me fits. I appreciate it any help or advice.
@dwjackson903 when the check engine light went on and did the code reader it was the TCM code. You need that warning for the recall. My appointment isn't till may 3rd but went into Ford in person and they said its covered under manufacturer warranty (recall) , however the part is back ordered for over a year and cars have just sat on the lot
@@kentheman5 WTH do they do to accommodate you in the meantime seeing how we are left without a vehicle after we placed our money and trust in a company that literally was founded upon making a quality product for the working man to rely on to get the job done, fast-forward a century of research and development and this is the best solution they have??
@@dwjackson903 I will let you know . Maybe a loaner car or a money pay out
I did this procedure and it has completely fixed my transmition thax so much. It's been at least 2 months.
Chad, if you have a focus please look up on youtube "clean ford focus actuators" it solved literally all of my transmission issues.
Just in case you run into any more trouble like hitching, hesitation, shifting from 1st to 3rd to 5th, or shifting super hard. This will fix that. Just spreading the word as it only costs what brake cleaner costs.
@@NaviYT oh wait I did this on a 2013 ford escape and it did work for it and yes I do have a terrible hesitation at times it's even dangerous when pulling into traffic I almost have to floor it before it moves and then takes off like a rocket, not the best way to drive. I'm talking about my escape, I just looked for the video on the actuator for the focus I take it they're the same for both vehicles and I couldn't find it could you please clarify what I would do or look up. For the escape that is.
@@chadbosko8935 I have not seen it for the escape, are you looking for a video explaining this on a focus? I know where to find that and I can link that, sadly idk if it's the same for the escape but I imagine so
@@NaviYT it's for an escape my neighbor has the focus same year and they seem so much alike please send the link.
@@chadbosko8935 ua-cam.com/video/0Fh5G6ebD8s/v-deo.html
Thank you. It worked.
I went to the dealership to see the problem, they were charging me $100 just for a diagnose, and said that you need a new clutch, that we cost me $3000😅
Hands down the most helpful video ever posted to UA-cam thanks !!! This really worked
I appreciate it, the mechanic told me that the transmission was bad but I programmed it and it worked
But you have problems with thr transmission it was jerking?
This 100% works BUT temporary! For anyone having tcm problemes with their ford and is waiting to repair it, just reset the tcm everytime you’re going to drive and you should be pk
Hey everyone, to piggy back off Charles here.
If you have a focus please look up on youtube "clean ford focus actuators" it solved literally all of my transmission issues.
I'm not sure how temporary the fix is, but it makes sense that a dirty transmission is going to have issues. Cleaning the shift actuators with brake cleaner did the trick for most if not all of my transmission issues.
The sooner the better because if they get too stuck, it's going to snap one of your shift forks. The first symptom is one of your two clutches getting stuck engaged or disengaged
@@NaviYT Did you have reverse issues like many people do with these vehicles?
@@BruceLigno In my case the opposite actuator to the one that does reverse was messing up. If it were the actuator then yes I would be having reverse issues. Same issue except for me, my good gears are: stuttery 1st gear, 2nd, and then skips 3rd goes to 4th. If I were having issues with my other actuator then I wouldn't be able to go into reverse. There's a thread where i helped someone diagnose and fix this issue. They did not have reverse gear.
@@BruceLigno Please look at Chris Murphy's Comment and it's reply section on this video that we're commenting on. The one with 33 replies. That's where I was able to help someone get their reverse gear back and their car running and driving again.
@@NaviYT Awesome! Unfortunately, that video you showed doesn't seem to be up anymore. I'll check again to make sure though!
What are the benefits of resetting the transmission?
Thanks. My actuators went out and the tcm refused to accept the new ones until finally getting to do this.
thanks for posting this comment! That's really good advice. I'm going to try to spread the word about these actuators. Cleaning them fixed what ford quoted me $1500 for. (quoted me new forks, and the works) all it needed was a good cleaning
@@NaviYT Has that solution held? I hear that the problem returns
@@prueensgloria4743 It can return but that's cause the original issue is the clutch kicking up too much dust. In turn, everything gets gunked up inside. It's worth doing no doubt. If you don't eventually do it. Your clutch will get stuck and you'll end up either breaking a fork or burning out an actuator completely.
To your question, yes, haven't had any issues so far and I did it in september of 2022
Bro i love u u right talking good and thanks alot
This worked perfectly, thank you very much, my check engine light even went away after doing this reset.
Same with me & my engine light on 1yr for Cat Converter code
Thank you, now I can drive!
Once it says transmission ready, what can we expect after that? do we then start the car in full and drive it normally or are there more steps after? DOes this just reset to the OEM standard and the car will drive normally again?
It resets the Transmission its ready to go
Worked. Amazing. Thank you.
Is this work on the Focus MK 4 too ?Because after Battery restore the Automatic runs not so good
This actually worked!!! But what is the actual cause of the trans not shifting I want to fix it! But the car wouldn’t move till I did this procedure!
Thank you for the video. I really hope this can clear up some of my issues
J, if you have a focus please look up on youtube "clean ford focus actuators" it solved literally all of my transmission issues.
@@NaviYT thanks for the tip. I’ll take a look
@@jgetscensored7837 hope it helps!
Oh my gee…
I have a 2014 Ford focus SE titanium push start . do not start your car up completely. Just push the button to turn your car on when he says to turn your car on then follow his instructions but remember to not fully turn your car on. But mine said transmission ready… I pray to God this works.. I got a message on my vehicle last night. That transmission was hot. Pull over wait five minutes..
I work for Uber and I listened to a bunch of videos last night, but I had four gigantic men get in my car last night, and I could literally fill my car just sink down . Easily 1300 pounds was sitting in my vehicle. I drove them to Fort Worth because they were partying at the clubs. And in that area there are hills you kinda have to go up and down small ones. Anyway I was almost there to their destination and I got the message warning, trans transmission hot pull over and wait pull over stop wait five minutes…. Well, I waited 30 minutes. I was 25 miles from my home. But driving home I had no issues.. at 80,000 miles my transmission went out and I had it replaced for $2500. And my car is not slipping, gears or anything like that I just had that warning message show up on my screen. But I just followed his directions and it said transmission ready so I reset my transmission. I again thank you so much.
Can I use this for 2013 ford scape ? Thanks
Hi friend do you also know how to reset the Mondeo shift?
Got me back and going in reverse. God ❤ ya!😊
What’s about ford focus 2015? Will this work for it to?
Yes
Does this work also for 2.0 diesel engine with 116ps?
Work Great thanks. Just an in info i drilled top hole 5mm from lef side insde where actuator. Which mean inside when you put back actuator cover top holes. Saving from water and dirts goes inside Case 😂
Will this work on my 2019 ford ranger
Im confused at the end of vid i keep doing exactly what he is doing and im not getting anything 😅 ? Are switching back on put in nuteral and what another 16 sec then tunr on ????
Code erreur p0902. That says "Transmission actuator problem" is your video is relevant to my issues?
does this worked on ranger?
My 2016 Mondeo had 163000.00 miles on it and the issue I have from around 45000 miles is that it goes into a sort of safe mode where on the dash says `see owners manual ` , the way I get over this is to pull over as the car will not excellerate as it cannot select the next gesar - I will pull over and turn the car off and wait for 20 ish seconds and then turn it back on and it resets the computer and then I drive off until it happens agan - it may not happen again for thousands of miles or may be just 1 mile - any thoughts guys - Cheers (UK)
I hear you shifting at the end before you say transmission ready. ,Are you shifting to what?
WHAT THE HELL MAN?!?! It was that simple and it’s running again. Thank you so much
This work on a Fiesta right?
Please the car is currently pack at the mechanical shop however the transmission is still on drive mode what should I do ?
you da hoat bro you saved time to partayy
is this applicable to ford ecosport
Why and when do we need to do that? I have a 2013 SE Ford Focus. Please let me know 🙏🏼
Was getting DTC P073F on my 2012 fiesta. Did this and the code went away. Before i could see on my DTC scanner live data that when i would take off from a stop it would start in 2nd, after doing this it now starts in 1st as it should.
That’s work for me! I’d try a couple of times and that it
Is there any way to do this with keyless go???
That i wanted to know to the steps for button start
When would you need to do this?
Mine is a 2016 Ford Focus
My Transmission Shudders at Take Off, after about 30 of Driving...
It also Shudders at Take Off after making a few stops at different places - and shutting my car off at those places, then turning it back on after I leave a place. It will begin Shuddering at Take Off.
It's really work
Can u do this to a 2018 ford escape?
So mine said transmission ready after I did all this but now won’t start, engine light blinks and the oil lamp is on now
After 15 seconsds or longer transmission not in park select P .. Never goes away. But transmission ready pops up
Put it in N at the very end. It was written very small, and he failed to say that. You’re welcome.
Como resetear un Ford Focus hatchback 2018 automático,? no da la reversa, y hacia adelante no revoluciona al 100% 😢
I've tried this on my 2016 transit connect and my 2018 escape. Doesn't work for either.
How are you changing gears with the key off? To change gears on mine I have to have the key on and my foot on the brake. This is a safety mechanism in all cars so kids or a passenger cant slide it out of park and have the car roll away!
I saw him turn the key on right at the beginning. I did this procedure and it completely fixed my transmition seems like for good, thx so much.
@@chadbosko8935 gotcha, didn't see it in the vid, thx
Funciona para Ford fiesta 2011?
Misma pregunta yo lo estoy haciendo y aun no funciona
@@adrianverdugo6846 que le peguen una reseteada a la computadora eso hice y se desapareció el msj
@@chirristruck7974 en el AutoZone lo pueden hacer? ví algo en internet Hacer lo de la palanca y después desconectar la batería y conectarla de nuevo voy a probar
@@adrianverdugo6846 no en AutoZone el scaner no sirve para nada nomás es para detectar fallas,ve con un mecánico de confianza que tenga scanner y pídele el scanneo completo y que los borre
@@chirristruck7974 si ya tengo uno pero quería evitar los 550 pesos 🙃 ni modo
I am still unclear as to what the issue was that the transmission needed to be reset for, can you please share what this solved? Will it solve a transmission overheating? Any potential solutions for that?
In the 2014. Impossible to do that the shifting is blocked
@@lemonde-libere7062 can you explain? impossible to do what? do you know a solution for transmission overheating?
Thanks!!!!!!
Now i see why my grade 6 teacher's acronym for Ford was Found On Rubish Dumps.
Lo intente hasta que me funciono después de unos 3 intentos brutal
Pero tu carro hacia movimientos q cambiava de cambios? prendias y no queria prender? Y tenia check wngio. Esto te funciono?
WHATTTT!!! THERES A RESET? i have a 2012 ford focus and this POS has given me so many issues
yo literally. got a 2013 and I am beyond frustrated with this piece of piss
I have a 2012 fucken tcm recall ford can’t get the part shifts like trash sometimes resetting it fixes it or disconnecting the battery temp fixes but the check engine light always come back for the same thing transmission control module or it comes up soemtimes as bad clutch actuator a or b which from talking with ford is the same codes it’s cause the tcm is straight booty and fails and ford doesn’t wanna fix them
Guys look up “clean Ford Focus actuators”. Saved me a bunch of headache
@@NaviYT seriously?
@@wislydauphin7645 mine was shifting 1st to 3rd to 5th and sounded awful during acceleration. Cleaning those fixed all my issues for the price of brake cleaner and E10 torx socket
Last step is unclear, how can I put it on N and key in off position? Ford Galaxy 2011,thx. for Video.
I have a 2012 plate. It wouldn't shift to sports mode. Lost power while trying to drive and got stuck in the road because didn't want to move. Recovery man tested it said was tcm and reset it. Now wondering how long til goes funny again because garage got it from won't fix it as said nothing is wrong or showing fault codes
It’s not working my car won’t let me go into neutral with key in off position
To everyone below, you do know you need to replace the dual clutch transmission fluid right?? Resetting it won’t fix it. NO SUCH THING as a lifetime fill on any fluid. Oils breakdown from friction, heat cycling, and age. Triax has a cheap fluid for DCT.
know anyone around Denver that fixes these transmissions?
if i do that how is going to help me?
alex, if you have a focus please look up on youtube "clean ford focus actuators" it solved literally all of my transmission issues.
you can't shift unless the key is turned and the video was edited what did you exactly do after waiting 15 sec.
Yeah this is fucked up instructions. I’m sure most people don’t get any results
The last step: turn it back on, then put in neutral. you're right he doesn't explain it clearly, but if you back up the video and watch it carefully you can see that when he turns it on it's still in park... then he puts it in neutral... there is a pause and then the screen reads transmission ready
I don't understand I have a vehicle right now stuck I N IN DOING what it's saying but nothing even showed on how he is moving shifter
Go put ur fiesta in neutral and turn the key off it will always say transmission ready look in owner’s manual it’s says that for flat towing that’s all it is it’s no transmission reset
Porque pones el título del vídeo en español y el vídeo lo haces en ingles
El título y la descripción del video están en inglés. Puede ver fácilmente lo que está haciendo para restablecer la TM, además, esta es una solución temporal. Es posible que deba reemplazar o actualizar su TCM.
Me encante leche de bicho
Possible to do it on manual gearbox ?
Nah...my 2016 ford focus auto . Won't left me shift to N when engine is off.
Didn’t work it keeps saying transmission in P. Need help
Turn on positive neutral (turn off in neutral) 15sec
put back in park turn off 15 sec
turn on put back in neutral
I used scanner and delete errors twice a day for 2.5 weeks , was just about to order Chinese TCM when suddenly car did not pop up the red light and it went back to normal
After 15 seconds mine doesn't turn off 😢
Ughhh as soon as turn on amd put neutral us model s says transmission ready
I'm selling mine after this. And I swear to God, to never ever get a Ford again...
Nothing happened .edit this video if you are trying to help
John, if you have a focus please look up on youtube "clean ford focus actuators" it solved literally all of my transmission issues.
The beginning of the video is useless. You just have to turn the ignition on put it in neutral and it’s reset
Ready for what ?!?! Another mechanic or another day? I didn’t hear it turn on?!?!?!
Anthony, if you have a focus please look up on youtube "clean ford focus actuators" it solved literally all of my transmission issues.
Los peores carros son pura basura !!!! Dan muchos problemas
QR, busca en youtube "clean ford focus actuators". Literalmente, me arreglo todos las problemas que ha tenido con mi focus. Ojala que te sirve at ti tambien
Didn’t work
Doesnt work us model focus s 😎😡 p2610 is on
Worst how to video ever
am i the only one with a focus that nothing will work for it, i tried this a million times it doesn’t work. the car will never reverse and the transmission will never reset, even with an autel scanner i tried to reset it and it gets stuck at 80% and will be stuck there for over an hour. i tried disconnecting and reconnecting the battery and trying the reset still nothing. the focus is the biggest piece of shit u can buy. the transmission is a pile of shit, the rest of the car is good the transmission tho ? dog shit.
Likely your actuators. Get new ones and install. Before installing look up how to run the forks in and out while lubing - Unless your clutch is really bad, this works.