Making Big RC Car with Foam Board : Datsun 240z (DIY Challenge)
Вставка
- Опубліковано 2 чер 2024
- The first 1,000 people to use this link will get a 1 month free trial of Skillshare:
skl.sh/juliusperdanapaperrepl...
I'm trying something new again this time, trying to build an RC car that I never do it before. I know the hardest RC model to make is model car, but it turned out to be a lot harder than I expected. There were many troubles on the process like, I had to change the gear ratio combination because the first one was too heavy for the motor. The second gear combination was okay but still not efficient. The first motor (1200kv) was burned out, I had to replace it with 650kv. The second gear combination broke their teeth and then I replace the material from PVC foamboard to 2mm plywood, each gear comprise of 4 sheets bonded together. The mechanism was to noisy until I applied lubrication to the gears. And then the steering servo broke I had to replace it with a new one. It's so frustrated I kicked the car few times in madness lol, but luckly it still has it shape. Beautiful shape actually, the back side I think I nailed it, but the front side not so much, because the front tip is supposed to be lower but the front wheel are on the way. After many troubles, finally on the last day it can run and I can RC-drive it as you can see on the video and it turned out quite a good sight. I learned so much on this project that I can use that experience for other future projects like, making gears, use 2 switches to reverse brushless rotation.
SUBSCRIBE and Like to support this channel
#rccar #datsun240z #diyrccar
You can download the plans on the link below :
A4 Plans : paper-replika.com/RCplans/PR_...
A0 Plans : paper-replika.com/RCplans/PR_...
A3 Decal : paper-replika.com/RCplans/dec...
Build instructions :
paper-replika.com/index.php/r...
DONATE via Paypal : Juliusperdana@yahoo.co.id
Join this channel to support me even more:
/ @juliusperdana
Playlist :
00:00 Intro
00:45 Making wheels
03:45 Chassis
06:36 Car Body
11:26 Lighting and Detail
14:05 Test Drive
16:26 Review
Specs :
1. Length : 1030mm / 40.5 inches
2. Width : 455mm / 17.9 inches
3. Wheel : 160mm / 6.3 inches
4. Wheelbase : 610mm / 24 inches
5. Weight : 2840 grams/ 100.1 oz
6. Drivetrain : Rear-wheel drive
Electronics
- 3536 1200kv - 650kv Brushless motor
- 50A ESC
- Battery Lipo 3S 2200mah
- 1x Standard servo
- 4x 9 gram servo (micro)
- 20x 5mm blinking LED (yellow)
- 2x 12v LED single LED (white)
- 50 cm 12v LED stripes (white)
- 3v Step down
- 7x limit switch (micro)
Materials :
1. 3mm + 5mm Foamboard/ Depron/ Polyfoam
2. 3mm Plywood / PVC foam board
3. 0.5mm Mica Plastic
4. hot glue, UHU glue, CA glue
5. packing tape/ Oracal 651
Tools :
1. Hot glue gun amzn.to/3BXwfGs
2. Heat gun amzn.to/3lawF5H
3. Covering iron amzn.to/3k2kM2s - Навчання та стиль
Outstanding... you did it and did so without adding wings. Sound was a nice touch, details such as turn signals added a lot to the build. I have built a couple of your planes, and was amazed they looked pretty good , despite my old hands and eyes, I thank you for sharing. Your build of complex curves and mechanics amazes me yet are completely logical, making me wonder why I didn't think of it. Thanks again for sharing. Your yacht made me revisit my ORCA project, it's foam and might float. Please take care.
Incredible, you are a highly skilled modeller.
Yep Agree absolutely brilliant and ingenious the way you use your materials. Absolute Genius. Yes Im happy to watch 45+ videos.
Very nice proportionally scaled model. You are lucky to have that open space in your neighbourhood where you can enjoy your creations. Good luck for the next build and thanks for sharing.
ini mobil remote handmade paling lengkap yang pernah ada,, bahkan ada sistem pengeremannya... mantappp....
Amazing work Sir...why you only have 44k subs is just an insult, you should have 5x that ammount or more.
Been watching for years and you seem to LOVE your craft.
OUTSTANDING.
Thank you for your time and the vids.
You are a master builder. I owned a 1974, 1977 and 1978 Z cars. All bought brand new. I kept my 78" for 35 years. What awesome cars they were. Thank you for your project. You are a genius.
Wow, thanks!
Bravo. This car has more working lights than a typical car on the road
lol
Fantastic! To think you build your own wheels, brakes, drive gears, on and on, just... Wow!
This man is so talented an one amazing builder amazing work with the smallest things
Julius, that is an absolute beautiful build. you are a true artist. I have been building RC planes and ships for 35 years and am impressed with your work.
thank you, it's an honor compliment by you. Tommy
That was a refreshing way to build an rc car. Everything was scratch built. Fantastic build.
Filipino ba yang nsa video o indonesian
Fantastic build, well done!
Mind Blowing Pak!
Once again, you have proved your genius! Really awesome result!
How did you make the rear view mirrors on the bonnet? Pls don't shorten your videos, Pak. We can easily watch 40-50 min videos of yours, as each is very interesting.
Not what analytic says, but this is just an experiment how shorten video performs.
Thank you sir. You are my favorit DIY foambord model builder. True expert level.👌
Brilliant work, looks spot on
手作りでこんなに精巧に作れるなんて、凄すぎます‼
Absolutely Outstanding!
Great video!You never cease to amaze me Julius!
This is very cool. Thanks for sharing!
I love these. I need you to create a step by step book for airplanes and cars and sell kits. I would have a whole foam car collection of exotic cars.
Julius perdana : papercraft legend 👍🏽👍🏽👍🏽
Buen proyecto Julius Felicidades
Great build again, you are a genius, thumb up!
Incredible work on building the body shell from scratch. Wonderful details. Congrats on this beautiful build. Subscribed.
This is amazing! you got skills. thanks for the great video.
Joss tenan mas jul.....Menginspirasi..
Spectacularly magnificent build Julius! Once again, you show us your genius. You have really inspired me to think about the possibilities of the foam medium. Thank you once again for sharing your creation with us!
Suggestion for this build: Try adding some weight to the chassis to give it a more solid feel while driving, and reduce the 'hollow' sound. Great job!
Wow! Just wow. What impressed me was the lights. The turn signal works! I've never seen any car model with functional lights.
there's a lot of model rc car with functional light...even with hydraulics sound....but DIY from ground up is rare...
That's awesome! Very well built sir.👍👍
projetc yang ga di sangka sangka keren juga bikin lagi om
show de bola esse caro parabéns pelo trabalho
You sir are Infriggencredible!!! I love what you do!!
You have very skilled hands, it's a beautiful Datsun Z.
love it, with 3D printing and bigger budget - This guy can build anything!! Sending Love from USA Z owner!
Awesome BUILD !!! 👍🏻👍🏻👍🏻
I love it!! Good job man
SATISFATORIO ! PARABENS !!!!!
Keren - genius my brother Jul selalu sehat untukmu
Absolutely fantastic ! Can think this has been built from flat sheets of Depron unless I'd seen the video. I wish I had even 10% of your talent.
One of my favourite cars and really enjoyed wa t the video.
747, superyacht, 240z whatever next ? Can't wait to see the next project.
Many thanks for keeping me entertained and impressed 😄😄
Julius, I'm blown away with your creation. Great job!
Wow, thank you!
You are the talented guy I have ever seen. Respect sir
Absolutely fantastic !!
Di tunggu project selanjutnya gan ..
You are really amazing, congratulations
Muito bom, legal demais. Parabéns.
Wow! Nice work man!
10 million views you will do for sure with this video, congratulations, your bodywork is beautiful, they will build it a lot, congratulations as always you are a true reproduction artist
You may not be a “car guy”, but you definitely know what you’re doing. Great work!!!
I appreciate that!
Wonderful build sir, very nice indeed !
Increible, felicidades desde Mexico. Saludos
Tio Julius no has tomado en cuenta de invertir los piñones o engranes ósea el pequeño en el motor y el grande en la transmisión es para probar y si tiene fuerza para que arranque desde cero Eres un genio te felicito por cada proyecto que haces son de lo mas genial saludos desde Venezuela.
To the 102 disslikes its obvious there jealous the smal percentage of haters who can't appreciate talent this car wasn't built with high tech equipment he used simple tools to create a ripper of a car.most disslikes could not put 2 Lego blocks together...well done kuya slamat
Amazing Nice Datsun . Well done. Cheers from Germany
Crazy, good job
Great work! 👍
Nice work well done looks great 👍
Keren bingit Om JP, sehat dan sukses selalu
magnificent build
This is awesome! Thanks for sharing 🙂
Thanks for watching!
Superb bodywork!!!
Fanatastic, the true model maker, keep it up and you will do unimaginable things!
Thanks, will do!
Молодец! Теперь и суша покорилась большому мастеру!
Mantap om big rcnya 👍
Krasser Typ‼️
I love your builds!!!!!
Very very cool! Lot's of Skills there! All from scratch! Great job!
Thanks a bunch!
i think that was a good project and i'm looking forward to seeing the rest of the Boeing 747 in the future and if thats still doesn't happen because of the pandemic i think you should maybe recreate your old tank you made a long time ago equipped with a working turret that shoots and rotates
Cakep om...👍👍
Eine Wunderbare Arbeit, das nenne ich Modellbau!!!!! Super gemacht, da kann man nur zu Gratulieren!!!👍👍👍vor allem hat er eine schöne ruhige Laufruhe ohne irgendwelchen nervigen Geräuschen....
Danke sehr
Keren banget om. Sequential turning signal 👍👍👍
ternyata ga bisa kedip bareng hehehe, ngaco lama2
@@JuliusPerdana kalau pakai modul led flasher atau arduino om?
@@AlexaaDiecast bisa banget, cuma waktunya ga ada buat riset, waktu cuma 2 minggu harus publish
@@JuliusPerdana 2 minggu udah jadi mobil begitu sih cepet banget om. Rapih and full function lagi 👍👍👍
Great! 素晴らしい作品です!大好きな240ZのRCが見られてうれしいです。
Wow wow my favorite car since I was a kid in the late 70’s and early 80’s always wanted one in black 240z
I’ve been looking for a 1/5 scale Mitsubishi evo 9 shell now I’m gonna make a 1/4 scale model from scratch using your video, thanks bro
Wmuazny
and a petrol engine
Paman Julius Anda belum memperhitungkan untuk membalikkan pinion atau tulang gigi, yang kecil di mesin dan yang besar di transmisi adalah untuk menguji dan jika Anda memiliki kekuatan untuk memulai dari awal Anda adalah seorang jenius saya ucapkan selamat untuk Anda setiap proyek yang Anda lakukan adalah salam lebih besar dari Venezuela.
Nice work
Beautiful car!!
Great job as usual and very inspiring.
Thanks so much!
Impressive skills !!!!
Nah.... Sip... Sekali2 bikin mobil juga... 😜👍👍👍
Great job! Greatings from Poland! ✌😊👍
Thank you! Cheers!
That is a really neat project . Very well done 👏
Thank you very much!
Great work !! Beautiful !!
Thank you so much 😀
Thanks for your video .
Can you explain more about using stop switch to making motor drive forward and reverse .
Thanks
The power of simplicity. Very inspiring.
thanks
Mantap om... 👍👍👍👍
Amazing job! I thought about fabricating a body from this foam, bought some, but then decided to go with ABS for durability.
Good choice!
Nothing short of amazing
thanks
You make it look easy! Great job!
Thanks
Great 👍 job you have done R/C Control car 🚗 people love it and the planes ✈️ also....
Thank you very much
Om jupe memang juosss...!!
Kayanya kelamaan ngopi di lapangan nih
I'm fan of quarters cake cars, i build some. You method is very nice and your video is nice to watch! Thanks
That looks amazing!
thanks
Awsome id love big jdm rc like the 240z
wonderful wonderful work congratulations julius
Thanks
I agree ,Awesome build all from scratch! Super bad super cool.
Glad you like it
Você um Mestre.
you've never failed to amazed me sir ...keep it up
Thank you very much!
Keep it up bro , galing , God bless
thanks
Amazing mas 👍
Cool!! May need to add suspensions. just an idea..great work !