thanks for that! I'm new at this, and have a cheap brush that has that valve. It was clear that it reduced air flow, but I just had no idea why! This explained it perfectly, and I'm eager to give it a go.
I have to say thank you for the informational videos. I just purchased my first airbrush kit with the Mac valve. I can't wait to practice and make something creative. I have to be truthful. I purchased the airbrush kit touch-up wrecked rc airplanes after repairing them. But watching your videos inspires me to do more than touching up wrecked rc planes.
I have a MAC valve that is installed directly before the quick connect fitting on my airline so it is available to use on the airbrushes that don't come with one internally. It works a treat and serves a a bit of a handle at the same time. Have a great day, and thanks for the great video :)
Thanks for the info,it’s very useful! I have an Iwata Revolution which I use for all my general work and a Sotar 20/20 which is for my fine work. I have quick connects on all my brushes but on one of my hoses I have the Mac valve built into the disconnect. I don’t use the Mac valve very much since I like to know what pressure I’m shooting at. That said, I usually thin all my paints 50/50 or 60/40 thinner to paint and at about 12-15 psi. The only time I use 25-30 psi is with Stynylrez primer. I work primarily on 1/87 HO and 1/160 N scale models. Watching you do large artworks has seriously tempted me to venture out of my box and try something more challenging. Again thank you for you videos, they are very informative and have answered many questions!
Thank you for your comment and kind words , glad you enjoy my vids and that you are tempted to try some larger scale artworks , I’m sure you will do amazing given that you are currently working on smaller projects and that takes control and precise details 👍🏻
Yeaaah good Demo! I also use the valve without reducer, in this way, I can spatter in a controlled way, less pressure thicker drops! More pressure thinnner paint drops!
Dude thank you! Just started airbrushing and couldn't find what was the purpose of that vale. I knew it reduced the airflow but couldn't find why. Now I know and once I figure out the ratio for thinning I might be good to go.
Thank you for that. I actually stopped using airbrushes with a MAC valve, mostly because I didn't fully understand its purpose, or that paint dilation needed to be different. That was more the miss for me I think. I wasn't changing my dilution. I will most certainly give it a go...I might invest in a mac valve equipped airbrush soon
I use mine all the time, really comes in handy eliminating the need to adjust the air pressure at the regulator. Also, you can close off the MAC valve and pull far back on the trigger and get a spattering effect.
Great video. I have a CRIOS PS-289 and didn't fully understand how to use this feature. Building Scale models I will have to give this a try instead of going to the compressor so often to fine tune the airflow. Thanks again for another awesome video!
Thanks a lot for teaching how to use air brush and painting with it. I had some air brushes but never try it, out of fear of making mistakes. With your tips, I shall try.
I LOVE the MAC valve on my Master G44! I was surprised how much I loved it! I have been using it when I stipple because it allows much finer control. Add the limiter into the mix and I have more control than I ever thought possible. My new Paache Talon does not have the MAC. Getting ready to polish needles tonight to make all my brushes better!
Nice info on it's precision in comparison to playing with your main regulator. Wish u would have shown your take on spatter effect too. Thumbs up to all your help on the journey 👍
Thank you , I may show some spatter info in a later info if that helps 🤔 the main thing is the convenience and the fact that you can run the psi so low by using the Mac valve , if you run your psi too low on your compressor then it will work similar to a point and then it will start to spatter which is great if you want that effect 😉
@@AirbrushAsylum Highly appreciate all you do for us beginners! Just piddling around with an old VL, Talon full set, Matcto .3 (broke off the nozzle threads) and got it out simple with a toothpick.. Besides the mess, loving the Sparmax GP 50. Really loving how it handles whites down to details. But as it is, still got to get that 771 my pennies are screaming for...
Having just started using a Procon Boy with a valve... yes, it's worth it for me. I haven't used the airbrush much, but just the small amount i've used it i've found it really convenient.
You should make a video about what type of paint we can use,how much you have to reduce it so you can spray it,can we use reduced acrylic car colour and other stuff like that,you are awesome and super helpful keep it up!
Have you ever considered doing a radio controlled buggy body? I would love to see you do one on your channel especially as you work from back to front as you paint on the inside with the detail laid first
Can't get my airbrush to perform like that. I think it's more you than the airbrush. It may be against your better judgment, but please do a video to show us that performance like that can be done with a cheap Chinese airbrush. Always impressed by your skills! Keep up the good work.
Thank you for your comment and yes, experience and lots of practice definitely helps, I can still pull great detail out of a cheaper brush but parts don’t last as long and it’s harder to get smooth performance out of them, I will keep your suggestion in mind for future vids 👍🏻
Thanks for the video. Now I know what their actual purpose is. I use the MAC valve for stippling effects. Basically setting the MAC valve so low the airbrush starts to spit the paint rather than an even spray. The result is a random ‘star field’ like effect.
Would you get the same effect, or a different one, if you had reduced the air pressure at the compressor/regulator, instead of using the "Micro Air Control" (Iwata's definition of the acronym) MAC valve?
Sure, but consider how much fiddling he did to dial it in, would you want to be doing that with the compressor directly? Would you then want to remember to reset to the proper psi on the compressor after? It's a convenience, much like. Oat features that drive up the price of an object
Yes, over thinning and dropping your psi will work but as others have mentioned here it is a convenience thing and also keep in mind that you are still getting full air coming into your brush the mac valve is only reducing the flow , therefore you can go really low which if you turn your compressor to the equivalent it may spatter your paint 👍🏻👍🏻
Really enjoyed your videos as usual what airbrush compressor are you using I have an old iwata smart jet compressor can't get over 35 lb with it an HP CS Iwata airbrush but not with a Mac valve thinking about upgrading
I like the MAC valve. But is there any way to make it so its not blowing air constantly? My gun blows air constantly compared to my other gun without the MAC valve. The compressor is constantly running with the MAC valve. Any way to fix this? Great videos btw.
Thanks for sharing this information. I might look for different airbrush than the Paashe with a mac valve, which does not work, it bubbles, and I have cleaned it. Actually I have two and they both do the same thing. I have Iwata's and might get one of those with the mac valve. I also have a SharpenAir that has straightened my needles.
, I have a Mac valve on one of my airbrushes and I tried it I'm texting me getting used to I'm going to get me one of them creos airbrushes the 18 I'm going to try it out and it's affordable and cuz I bought one of those Steeler hardback or hardback Steeler airbrushes I haven't got it yet I'm still waiting on it but it's supposed to be an ultra fine needle in it 15 I believe anyway I'm looking forward to getting it and trying it out I know I'm not saying the name of that airbrush right but I'm sure you know what it is and once again thank you for all the work you do to help people understand airbrushing and made a living God Jesus Christ bless you and your endeavor
You are a fantastic teacher! I am not a very good learner. I am not an artist. I have been using my airbrush to add designs to shirts an leather jackets (no T- shirts) I have a Harder & Steenbeck Infinity with psi adjustment at th gun. I am having a hard time time with th paint on paint off also using two hands. Is you course trying to teach me to draw? and is th price one time an how long do I have at that price? I have seen th preview. Thank you ! Cheers!
Hello My Iwata HP C Plus doesn't have a built-in Mac valve. I was thinking about purchasing an Iwata external Mac valve. Would it do the same job? Thanks a lot
Mac valve on a HPCP makes a great difference , the microns are great and super smooth but SO expensive now 😱 the Creos is a great alternative if you want a similar brush to a micron but for half the price (affiliate link) 👉🏻 spraygunner.com/ps771-gsi-creos-mr-airbrush-custom-0-18mm/?aff=9
@@AirbrushAsylum I've been shy of other brands but if you're using it then it must be a decent tool. I'll definitely get one with your recommendation . You're half the reason I can paint like I can lol thank you.
@@nickbarker9712 thank you so much and honestly the Creos are fantastic, made in Japan and the PS.771 (newer model to one shown in the vid) has the same 0.18mm setup, you won’t be disappointed 👍🏻👍🏻
I find Mac valves bit of a waste in that you could spend an £50 to go from a iwata Hp to Hp high line same brush just just with the valve so paying £50 more for a valve, it also stops the airbrush from fitting in the holder and I find they get in my way when holding my airbrush. I purchased a TC2000 + 5L tank it comes with a portable holder free (can buy separate) you can alter the psi from my desk so for me it would just be silly as my valve is less than 1f away! For about £8 you can get a set of 3 quick release couplings with Mac valves built-in so you get the valve on the brush but it's not in the way, it seems a better cheaper option to me but hayho great video as usual 🤔
@Sam Mariano just for fun I will make a video today showing how a £70 extra upgrade seems totally pointless to me. If you can watch it and say at the end I'm wrong or don't make a very very very good point, that you couldn't use that money towards a better brush then I say you must have money to burn!
@Sam Mariano Why is saving people money wasted energy! I mean I have an airbrushing channel and I'm doing a review of the CM-SB and HP-SB plus so not difficult to fit in mac valves, show how the £10 hose mac value is better value.
The needle sizes are GSI Creos PS.770 - 0.18mm and Iwata Micron CMC + - 0.23mm and the paint I used was Indigo Blue by Trident Waterbased Airbrush Colours. Links to all can be found in the description of the video, hope that helps and appreciate the kind words re the vid 👍🏻
Not really. That is additional mantainance cost especially when it start to leak (the spare cost is higher depending on the brands). There is cheap mac valve that attached to quick release device if you want that air pressure valve. Its cheaper than replacement parts from the brands of airbrush. Most compressor nowadays have a pressure gauge and I also use that as my air pressure control if I use airbrush without the mac valve.
I was not born with the artistic talent to be able to draw something without it looking like a 3 year old drew it, but I am into Rc, models, and 3d printing. Your videos have given me the knowledge needed to paint minatures and other things I 3d print. Just made a Multipass from the 5th element for my girlfriend's vaccination card. LOL I worked so hard, but only the hardest of sci fi geeks get it!
@Funkelberry McJiggletits I get it ;-) I'm also an rc guy who doesn't shine when it comes to painting. I have brand new bodies from 4 year old kits in need of painting. I finally crossed the river of emotional turmoil & collected all the airbrushing equipment I needed to get started. I'm surprised at how well some thigs turn out when I really put my mind to it. Good luck in your journey.
There isn't one. Save your money and get an Iwata Eclipse HP-CS. Looks around but it should be under 200.00. You'll need a oil/water separator and make sure to get an air compressor with a tank on it.
I have a H&S INFINITY no MAC and the Iwata with the MAC. They are both really great brushes but seriously the Iwata is my pick because of the MAC, it's just too easy to adjust that all important airflow.
I've thought about buying an airbrush with a MAC valve. I'm definitely not an artist. I just do scale models. But, I have actually looked at that very GSI in your video. I have to be careful, though; as I have large hands. I have a Richpen that I've had for 15 years or better. It probably has less than 25 hours on it. Just too dang small.
Fair enough not sure if you are living near spraygunner in Florida (they are touring as well) you could try and see if you can physically hold one before you buy 🤔👍🏻
40 PSI ??? what ???? have you read your arirbrushes instructions sheets? most new technology airbrushes work from 5 PSI to 35 PSI tops.... why whould you need 40 PSI even with the MAC valve? great airbrushes!!! I wish I could purchase the Iwata Kustom Micron funny thing you can achieve the same results with a fine needle/needle-cone setup and adjusting your air pressure from the air filter/regulator
I know , never had an issue with 40psi…I remember hosting the late Mike Lavallee for his Australian tour and the first thing he said to all students was ‘crank the psi up to 90’ …he wasn’t joking , as he loved to work fast and get that paint flying….I wouldn’t recommend 90 but in all my years I feel that 30-40 is perfect for all round airbrushing and then I generally reduce the psi to 18-20psi for fine detailing 👍🏻👍🏻
No crack, I think it’s either some paint or a shadow 🤔 they have the cut out (design feature) which could make it appear as though there is a crack but I can assure you that the brush is still going strong 💪
@@AirbrushAsylum Good to hear it is working!! At 0.53 in the video it looks like a crack at the welding spot right under the cup, where is small amount of blue/teal paint. Sometimes shadows make funny illusions! :) I have microns and been curious about ps-770, all I have heard is that they are great brushes!
@@AirbrushAsylum after my morning bike ride that's what I'm going to practice on get thin lines for the project I'm working on for a friend also you have a great channel for beginners on up to the more experienced so glad I found it you tube is great for instructions from experienced people to share their knowledge I also play guitar and I've learned quite a bit from the you tube channels so thank you all 👍
A MAC valve is a simple needle valve, and it controls Air Flow, not AIR PRESSURE, only a regulator can control Pressure. A Mac valve and the needle/Nozzle is the same thing, they both use a needle and seat to control flow. The nozzle is the seat, and the needle is the needle, they both control FLOW, JUST THE FLOW, EITHER THE FLOW OF LIQUID OR AIR, NOT PRESSURE!
⭐ Learn how to Airbrush better Lines : ua-cam.com/video/y8JknZVpyEw/v-deo.html
thanks for that! I'm new at this, and have a cheap brush that has that valve. It was clear that it reduced air flow, but I just had no idea why! This explained it perfectly, and I'm eager to give it a go.
Fantastic I’m glad it helped , have fun playing around with the Mac valve 👍🏻
I have to say thank you for the informational videos. I just purchased my first airbrush kit with the Mac valve. I can't wait to practice and make something creative. I have to be truthful. I purchased the airbrush kit touch-up wrecked rc airplanes after repairing them. But watching your videos inspires me to do more than touching up wrecked rc planes.
THANK YOU! I have been wondering about this valve for months now yet none of the airbrush videos I came across talk about it with any detail. 🤟😎
Only just started using an airbrush with a mac valve this video was a great help in painting my scale models thank you
Carsten the multi tasking master loved the control the airbrush as the MAC valve is adjusted bit 🤩
Lol , yep I do love it and it most definitely helps with multi tasking and it’s so convenient 👍🏻👍🏻
Thank you for showing me what that did I was trying to find a video for about a week I didn’t even know what it was called newbie to airbrushing.
Excellent lesson. Thank you.
Very welcome 🙏🏻
I have a MAC valve that is installed directly before the quick connect fitting on my airline so it is available to use on the airbrushes that don't come with one internally. It works a treat and serves a a bit of a handle at the same time.
Have a great day, and thanks for the great video :)
Unbelievable detail with important details for paint mixing & flow.
Thanks for the info,it’s very useful! I have an Iwata Revolution which I use for all my general work and a Sotar 20/20 which is for my fine work. I have quick connects on all my brushes but on one of my hoses I have the Mac valve built into the disconnect. I don’t use the Mac valve very much since I like to know what pressure I’m shooting at. That said, I usually thin all my paints 50/50 or 60/40 thinner to paint and at about 12-15 psi. The only time I use 25-30 psi is with Stynylrez primer. I work primarily on 1/87 HO and 1/160 N scale models. Watching you do large artworks has seriously tempted me to venture out of my box and try something more challenging. Again thank you for you videos, they are very informative and have answered many questions!
Thank you for your comment and kind words , glad you enjoy my vids and that you are tempted to try some larger scale artworks , I’m sure you will do amazing given that you are currently working on smaller projects and that takes control and precise details 👍🏻
Yeaaah good Demo! I also use the valve without reducer, in this way, I can spatter in a controlled way, less pressure thicker drops! More pressure thinnner paint drops!
Thanks for explaining this valve.
Dude thank you! Just started airbrushing and couldn't find what was the purpose of that vale. I knew it reduced the airflow but couldn't find why. Now I know and once I figure out the ratio for thinning I might be good to go.
Thank you for that. I actually stopped using airbrushes with a MAC valve, mostly because I didn't fully understand its purpose, or that paint dilation needed to be different. That was more the miss for me I think. I wasn't changing my dilution. I will most certainly give it a go...I might invest in a mac valve equipped airbrush soon
I use mine all the time, really comes in handy eliminating the need to adjust the air pressure at the regulator. Also, you can close off the MAC valve and pull far back on the trigger and get a spattering effect.
Yes it’s super handy and thank you so much for sharing your tip 👍🏻
Great video. I have a CRIOS PS-289 and didn't fully understand how to use this feature. Building Scale models I will have to give this a try instead of going to the compressor so often to fine tune the airflow. Thanks again for another awesome video!
No probs at all and the PS.289 is a great brush glad the video helped 👍🏻
Thanks a lot for teaching how to use air brush and painting with it. I had some air brushes but never try it, out of fear of making mistakes. With your tips, I shall try.
I LOVE the MAC valve on my Master G44! I was surprised how much I loved it! I have been using it when I stipple because it allows much finer control. Add the limiter into the mix and I have more control than I ever thought possible. My new Paache Talon does not have the MAC. Getting ready to polish needles tonight to make all my brushes better!
Nice info on it's precision in comparison to playing with your main regulator. Wish u would have shown your take on spatter effect too. Thumbs up to all your help on the journey 👍
Thank you , I may show some spatter info in a later info if that helps 🤔 the main thing is the convenience and the fact that you can run the psi so low by using the Mac valve , if you run your psi too low on your compressor then it will work similar to a point and then it will start to spatter which is great if you want that effect 😉
@@AirbrushAsylum Highly appreciate all you do for us beginners! Just piddling around with an old VL, Talon full set, Matcto .3 (broke off the nozzle threads) and got it out simple with a toothpick.. Besides the mess, loving the Sparmax GP 50. Really loving how it handles whites down to details. But as it is, still got to get that 771 my pennies are screaming for...
Having just started using a Procon Boy with a valve... yes, it's worth it for me. I haven't used the airbrush much, but just the small amount i've used it i've found it really convenient.
I love the MAC.
You should make a video about what type of paint we can use,how much you have to reduce it so you can spray it,can we use reduced acrylic car colour and other stuff like that,you are awesome and super helpful keep it up!
Thanks for the comment feel free to take a look at this vid 👉🏻 ua-cam.com/video/oAcJNzIzRQE/v-deo.html it should help with your mixing questions 👍🏻👍🏻
Have you ever considered doing a radio controlled buggy body? I would love to see you do one on your channel especially as you work from back to front as you paint on the inside with the detail laid first
Can't get my airbrush to perform like that. I think it's more you than the airbrush. It may be against your better judgment, but please do a video to show us that performance like that can be done with a cheap Chinese airbrush. Always impressed by your skills! Keep up the good work.
Thank you for your comment and yes, experience and lots of practice definitely helps, I can still pull great detail out of a cheaper brush but parts don’t last as long and it’s harder to get smooth performance out of them, I will keep your suggestion in mind for future vids 👍🏻
Thanks for the video. Now I know what their actual purpose is. I use the MAC valve for stippling effects. Basically setting the MAC valve so low the airbrush starts to spit the paint rather than an even spray. The result is a random ‘star field’ like effect.
you can also do a spatter or freckling effect by turning the mac valve down,
Would you get the same effect, or a different one, if you had reduced the air pressure at the compressor/regulator, instead of using the "Micro Air Control" (Iwata's definition of the acronym) MAC valve?
Yes
Sure, but consider how much fiddling he did to dial it in, would you want to be doing that with the compressor directly?
Would you then want to remember to reset to the proper psi on the compressor after?
It's a convenience, much like. Oat features that drive up the price of an object
Yes, over thinning and dropping your psi will work but as others have mentioned here it is a convenience thing and also keep in mind that you are still getting full air coming into your brush the mac valve is only reducing the flow , therefore you can go really low which if you turn your compressor to the equivalent it may spatter your paint 👍🏻👍🏻
It is the most important thing i love ❤️
Really enjoyed your videos as usual what airbrush compressor are you using I have an old iwata smart jet compressor can't get over 35 lb with it an HP CS Iwata airbrush but not with a Mac valve thinking about upgrading
Why wouldn't I just adjust the pressure a bit on the compressor? Isn't that quicker? Thanks for the great videos :)
I like the MAC valve. But is there any way to make it so its not blowing air constantly? My gun blows air constantly compared to my other gun without the MAC valve. The compressor is constantly running with the MAC valve. Any way to fix this? Great videos btw.
Thanks for sharing this information. I might look for different airbrush than the Paashe with a mac valve, which does not work, it bubbles, and I have cleaned it. Actually I have two and they both do the same thing. I have Iwata's and might get one of those with the mac valve. I also have a SharpenAir that has straightened my needles.
, I have a Mac valve on one of my airbrushes and I tried it I'm texting me getting used to I'm going to get me one of them creos airbrushes the 18 I'm going to try it out and it's affordable and cuz I bought one of those Steeler hardback or hardback Steeler airbrushes I haven't got it yet I'm still waiting on it but it's supposed to be an ultra fine needle in it 15 I believe anyway I'm looking forward to getting it and trying it out I know I'm not saying the name of that airbrush right but I'm sure you know what it is and once again thank you for all the work you do to help people understand airbrushing and made a living God Jesus Christ bless you and your endeavor
You are a fantastic teacher! I am not a very good learner. I am not an artist. I have been using my airbrush to add designs to shirts an leather jackets (no T- shirts) I have a Harder & Steenbeck Infinity with psi adjustment at th gun. I am having a hard time time with th paint on paint off also using two hands. Is you course trying to teach me to draw? and is th price one time an how long do I have at that price? I have seen th preview. Thank you ! Cheers!
Did you use this when you did the short video of the eye
Hello
My Iwata HP C Plus doesn't have a built-in Mac valve. I was thinking about purchasing an Iwata external Mac valve.
Would it do the same job?
Thanks a lot
Can you not achieve the same thing with the regulator on the compressor?
Please tell me which one is better in between Iwata HP-SBP vs Csi Creos PS771
Out of those two I would go with the Creos PS.771 as the ‘p’ series isn’t a micron (still amazing but just not as smooth) 👍🏻
@@AirbrushAsylum thanks alot..🙏🙏
I use an iwata in line mac valve myself I dont have a micron yet lol
Mac valve on a HPCP makes a great difference , the microns are great and super smooth but SO expensive now 😱 the Creos is a great alternative if you want a similar brush to a micron but for half the price (affiliate link) 👉🏻 spraygunner.com/ps771-gsi-creos-mr-airbrush-custom-0-18mm/?aff=9
@@AirbrushAsylum I've been shy of other brands but if you're using it then it must be a decent tool. I'll definitely get one with your recommendation . You're half the reason I can paint like I can lol thank you.
@@nickbarker9712 thank you so much and honestly the Creos are fantastic, made in Japan and the PS.771 (newer model to one shown in the vid) has the same 0.18mm setup, you won’t be disappointed 👍🏻👍🏻
I find Mac valves bit of a waste in that you could spend an £50 to go from a iwata Hp to Hp high line same brush just just with the valve so paying £50 more for a valve, it also stops the airbrush from fitting in the holder and I find they get in my way when holding my airbrush.
I purchased a TC2000 + 5L tank it comes with a portable holder free (can buy separate) you can alter the psi from my desk so for me it would just be silly as my valve is less than 1f away!
For about £8 you can get a set of 3 quick release couplings with Mac valves built-in so you get the valve on the brush but it's not in the way, it seems a better cheaper option to me but hayho great video as usual 🤔
@Sam Mariano just for fun I will make a video today showing how a £70 extra upgrade seems totally pointless to me. If you can watch it and say at the end I'm wrong or don't make a very very very good point, that you couldn't use that money towards a better brush then I say you must have money to burn!
@Sam Mariano Why is saving people money wasted energy!
I mean I have an airbrushing channel and I'm doing a review of the CM-SB and HP-SB plus so not difficult to fit in mac valves, show how the £10 hose mac value is better value.
Great video. What size needle were you using? Also, was the paint a lacquer, enamel of acrylic?
The needle sizes are GSI Creos PS.770 - 0.18mm and Iwata Micron CMC + - 0.23mm and the paint I used was Indigo Blue by Trident Waterbased Airbrush Colours. Links to all can be found in the description of the video, hope that helps and appreciate the kind words re the vid 👍🏻
@@AirbrushAsylum Thanks for the information. Keep up the great work!
Not really. That is additional mantainance cost especially when it start to leak (the spare cost is higher depending on the brands). There is cheap mac valve that attached to quick release device if you want that air pressure valve. Its cheaper than replacement parts from the brands of airbrush. Most compressor nowadays have a pressure gauge and I also use that as my air pressure control if I use airbrush without the mac valve.
Fair enough thank you for sharing your opinion with the community 👍🏻
I was not born with the artistic talent to be able to draw something without it looking like a 3 year old drew it, but I am into Rc, models, and 3d printing. Your videos have given me the knowledge needed to paint minatures and other things I 3d print. Just made a Multipass from the 5th element for my girlfriend's vaccination card. LOL I worked so hard, but only the hardest of sci fi geeks get it!
@Funkelberry McJiggletits I get it ;-)
I'm also an rc guy who doesn't shine when it comes to painting. I have brand new bodies from 4 year old kits in need of painting. I finally crossed the river of emotional turmoil & collected all the airbrushing equipment I needed to get started. I'm surprised at how well some thigs turn out when I really put my mind to it.
Good luck in your journey.
Ngl, I would get an airbrush with a mac valve just for how it looks compared to one without one
Hi, sorry a question not about that video, what would be the best under 50usd airbrush that I would use only for primer
There isn't one. Save your money and get an Iwata Eclipse HP-CS. Looks around but it should be under 200.00. You'll need a oil/water separator and make sure to get an air compressor with a tank on it.
@@hinddee I’m planning to get a “iwata smart jet pro”
I have a H&S INFINITY no MAC and the Iwata with the MAC. They are both really great brushes but seriously the Iwata is my pick because of the MAC, it's just too easy to adjust that all important airflow.
Yep they are super handy and thanks for your comment 👍🏻
I've thought about buying an airbrush with a MAC valve. I'm definitely not an artist. I just do scale models. But, I have actually looked at that very GSI in your video. I have to be careful, though; as I have large hands. I have a Richpen that I've had for 15 years or better. It probably has less than 25 hours on it. Just too dang small.
Fair enough not sure if you are living near spraygunner in Florida (they are touring as well) you could try and see if you can physically hold one before you buy 🤔👍🏻
40 PSI ??? what ???? have you read your arirbrushes instructions sheets?
most new technology airbrushes work from 5 PSI to 35 PSI tops.... why whould you need 40 PSI even with the MAC valve?
great airbrushes!!! I wish I could purchase the Iwata Kustom Micron
funny thing you can achieve the same results with a fine needle/needle-cone setup and adjusting your air pressure from the air filter/regulator
I know , never had an issue with 40psi…I remember hosting the late Mike Lavallee for his Australian tour and the first thing he said to all students was ‘crank the psi up to 90’ …he wasn’t joking , as he loved to work fast and get that paint flying….I wouldn’t recommend 90 but in all my years I feel that 30-40 is perfect for all round airbrushing and then I generally reduce the psi to 18-20psi for fine detailing 👍🏻👍🏻
Good luck
So, is it really worth it???
Yes I think so 👍🏻
is that small crack under the ps-770 cup, or shadow?!
No crack, I think it’s either some paint or a shadow 🤔 they have the cut out (design feature) which could make it appear as though there is a crack but I can assure you that the brush is still going strong 💪
@@AirbrushAsylum Good to hear it is working!! At 0.53 in the video it looks like a crack at the welding spot right under the cup, where is small amount of blue/teal paint. Sometimes shadows make funny illusions! :) I have microns and been curious about ps-770, all I have heard is that they are great brushes!
What is mac short for? Did Steve Jobs invent it?
It stands for ‘micro-air-control’ and Steve Jobs may well of had something to do with it lol 😂
perfect explanation on the valve i was wondering what the advantages of using it are so thanks from a rookie lol
No probs glad you found it helpful 👍🏻
@@AirbrushAsylum after my morning bike ride that's what I'm going to practice on get thin lines for the project I'm working on for a friend also you have a great channel for beginners on up to the more experienced so glad I found it you tube is great for instructions from experienced people to share their knowledge I also play guitar and I've learned quite a bit from the you tube channels so thank you all 👍
Mac valves do not control air pressure. Talk to a plumber and they can make it easy for you to understand pressure.
A MAC valve is a simple needle valve, and it controls Air Flow, not AIR PRESSURE, only a regulator can control Pressure.
A Mac valve and the needle/Nozzle is the same thing, they both use a needle and seat to control flow.
The nozzle is the seat, and the needle is the needle, they both control FLOW, JUST THE FLOW, EITHER THE FLOW OF LIQUID OR AIR, NOT PRESSURE!
Thinning the paint seems to be the secret…