Why is Japan so advanced with all their technology? That coffee looks amazing. You need to start drinking in black though Sam. You know what they say, once you go black, you never go back!
I'd just cut that whole line where it's rusted. Use proper rated hose and clamps. You could also flair the lines and use treaded joints with hard lines.
Great video Sam! Your editing and videography has gotten so much better over the time I have been watching. Thanks for all the great videos. Can't wait for tomorrow's video of Nismo Fest!
Sammit that golden box needs to be put into a refridgeorator. It cant be stored over 18°C. So before you open it, put it into the fridge for a day. Also check what the Mindesthaltbarkeitsdatum is.
I'd love to work behind the scene at Sammit HQ !! Coffee is definitely a required item!!! I wonder how you did fix the p/s lines on the truck. I am used to fix brake, fuel and p/s lines here in Canada, they rust all the time... I have a lot of different lines lengths made of different materials as well as a case with hundreds of pipe unions and nuts, very handy when we need to fix any kind of metal lines, pressure or not...
Oh that's a very easy fix Sam just cut the line and put a compression fitting in there you know the brass compression fittings like the ones that they make for brake lines that you're not supposed to use for brakes that would hold that over until you got the new line
Shout out to May. Behind every good man is an amazing woman. Your glowing and doing so much for your man. Without you the channel wouldn’t be the same so Thankyou!! ❤
You can get a Honda Beat in the UK for about £/$3k. Mk3 MR2's and Mk2 MX-5's are anything from £/$1-5k depending on condition. FN2 Type R's start at 2k. These are among the cheapest 'JDM' cars left on the market now.
yeah, those cabs on those trucks are a bit tricky to lift up. pull this lever, lift that lever simultaneously with that lever and lift...7-8 areas in the whole mechanisms and you pretty much need to manipulate half of those parts to lift the cab. then the lock in the front to push inward so you can close the cab afterwards... just make sure you support the driver door when opening it up and closing it.
Haha your speech in the beginning had me laughing. Before coffee I also switch up words and what not lol. The 86 looks so good! Fun to see the behind the scenes stuff as well.
Hey Sam...your hair colour seems familiar but where?. Oh your hair like the Riddles hair (Batman Villain's) 😅 Friendly Neighborhood from Sabah Malaysia [It's 05:22 am in the morning GMT+8]
Could you please link it as well i would love to support small knife business as well. Plus those are the tools of my trade here in the land Downunder. Love the content and congrats! May the god continue to bless your family..
SAM! IF YOU DONT WANNA DIE, please put a broom stick or else to secure the truck cabin from dropping back on you while checking the engine! I urge you to be more cautious . Please! I’ve seen this happen. It’s not pretty afterwards
Sammit I would love to get my hands on one of those MR2 Spyders, especially if it had a hard top! Watching your build on the rescue S15 is definitely making me want to get one once they're legal to import. Need to make some money for next year! HAHA!
stuff in the golden box is a german chocolate thingy called konfekt. you wanna put that in the refrigirator and eat it cold. its ment to be eaten like that.
What's up $am? I just have to ask how is Mae doing with the food cravings while with baby?? Any 1am trips for crazy food demands!? Been there, done that! Congrats again you two, soon to be three!!
Sam what ya doing with the two door R32 in the storage yard ? Send it to me as an Xmas pressie ! Combined with my R32 wreck I could make a street missile .
Big fan my dude, been watching your for a long time now. Love the content. If you ever want a free drink and meal when I'm in Japan next (March) just let me know, that would be a small thanks from a Kiwi fan. Keep it up!
Wouldn’t it worth pressure washing the truck so all that power steering fluid isn’t going to degrade everything. I would wash and then spray silicone spray on everything to lubricate it all nicely after washing, since using any cleaner or detergent will get rid of the nice lubricating properties.
You just gotta love the Japanese automotive industry, it just hits different😏
Couldn't agree more
100%
t gotta l
youtubebu.com/watch?v=T7VF9P6FbtX
Japanese automotive industry, it just hits different😏
Best in the world hands down
I spit coffee all over my tablet watching this.. when Mai said
" you look like a Starbucks cup! " .... I lost it! " Do you English" ... I'm dead..
Ong 😭
through
youtubebu.com/watch?v=1AQX0Y3rNh0
Starbucks cup! " .... I lost it! " Do you English" ... I'm dead..
@@mariholmes1701 shame on you!
Why is Japan so advanced with all their technology? That coffee looks amazing. You need to start drinking in black though Sam. You know what they say, once you go black, you never go back!
That is a very cool knife. I admire that you'd support small business handmade! We need more people like you in the world.
I'd just cut that whole line where it's rusted. Use proper rated hose and clamps. You could also flair the lines and use treaded joints with hard lines.
Epoxy on that pipe with heat shrink and fitting a hose clamp should do the trick for the week
Great video Sam! Your editing and videography has gotten so much better over the time I have been watching. Thanks for all the great videos. Can't wait for tomorrow's video of Nismo Fest!
Jb weld it and pray sounds like ruddy in his haggard garage days and now days 😂😂
This is a perfect jumper for me considering all I got for Christmas was a set of konig afterburners, something I’ve wanted since I was in high school
you need a Christmas themed t shirt for us back in Ausie and nz. I would be all over that
My.guy, I love the hair actually both y'all hair look amazing forreal
🤣 Good one May and being Australian Sam's still learning English 🤣 Go Aussie bro 👊 sugoi✌️ 🇦🇺 Best wishes for the little one in the oven! 🤙
Awesome video as always Sammit.
That powerstreering "cooler" should be on return side so you could also put hose to replace that rusty part..
Sammit that golden box needs to be put into a refridgeorator. It cant be stored over 18°C. So before you open it, put it into the fridge for a day. Also check what the Mindesthaltbarkeitsdatum is.
Wheels looking like they've been through hell:
Sam with the sharpie:
different😏
youtubebu.com/watch?v=DemEImh6JeJ
o work behind the scene at Sammit HQ !! Coffee is definitely
vlogmas is awesome so many youtubers participating this year
I'd love to work behind the scene at Sammit HQ !! Coffee is definitely a required item!!!
I wonder how you did fix the p/s lines on the truck. I am used to fix brake, fuel and p/s lines here in Canada, they rust all the time... I have a lot of different lines lengths made of different materials as well as a case with hundreds of pipe unions and nuts, very handy when we need to fix any kind of metal lines, pressure or not...
Oh that's a very easy fix Sam just cut the line and put a compression fitting in there you know the brass compression fittings like the ones that they make for brake lines that you're not supposed to use for brakes that would hold that over until you got the new line
Just curious how you got the gnarly scar. Looks like it wasn't the best of times for sure. And good luck with everything and the baby
10:11 oooo whos been smoking in there xD ahah jkjk sure its from the old owner, right? ;)
The colors on the sweater match. Plus the hair
Shout out to May. Behind every good man is an amazing woman. Your glowing and doing so much for your man. Without you the channel wouldn’t be the same so Thankyou!! ❤
You can get a Honda Beat in the UK for about £/$3k. Mk3 MR2's and Mk2 MX-5's are anything from £/$1-5k depending on condition. FN2 Type R's start at 2k. These are among the cheapest 'JDM' cars left on the market now.
yeah, those cabs on those trucks are a bit tricky to lift up. pull this lever, lift that lever simultaneously with that lever and lift...7-8 areas in the whole mechanisms and you pretty much need to manipulate half of those parts to lift the cab. then the lock in the front to push inward so you can close the cab afterwards... just make sure you support the driver door when opening it up and closing it.
🤙🏻🍕 just ordered my sweater from out here in Az, USA Can't Flippin wait!!!! 🤙🏻🍕
As someone that fixes wheels for a living, that sharpie job was hard to watch 🤢
“You look like a Starbucks cup”
🤣🤣
Heheh, sweater is cute. And so is that bronzey Trueno. Price must be pretty crazy on that one, though. :)
1:25 "You look like a Starbucks cup!" 😂
Keep up the great work
Haha your speech in the beginning had me laughing. Before coffee I also switch up words and what not lol. The 86 looks so good! Fun to see the behind the scenes stuff as well.
How strong does that coffee taste? Do you let it steep in there for a bit or just take it out?
Love that intro with the tire smoke and lights!
Hey Sam...your hair colour seems familiar but where?.
Oh your hair like the Riddles hair (Batman Villain's) 😅
Friendly Neighborhood from Sabah Malaysia
[It's 05:22 am in the morning GMT+8]
Could you please link it as well i would love to support small knife business as well. Plus those are the tools of my trade here in the land Downunder. Love the content and congrats! May the god continue to bless your family..
Sam doing big things. Love the car dealers in Japan
Love the sweater!
I've had coffee like that before, mine was a Thailand style with sweetened condensed milk in little packets.
SAM! IF YOU DONT WANNA DIE, please put a broom stick or else to secure the truck cabin from dropping back on you while checking the engine! I urge you to be more cautious . Please! I’ve seen this happen. It’s not pretty afterwards
Make my day!😁
Hey Sammit THANKS FOR THE SIGNED EBISU DAY PASS that came with my order
You just got to love May don't you... You look like a Starbucks cup hahaha that one had me cracking up for a bit. Lol
When do you sleep! Another Vlog video sweet I can’t wait to watch it🎉
if you open both doors on the truck it will make it easier to open
Dad Sam is already getting excited about kitchen knifes 😂.
Sammit I would love to get my hands on one of those MR2 Spyders, especially if it had a hard top! Watching your build on the rescue S15 is definitely making me want to get one once they're legal to import. Need to make some money for next year! HAHA!
Love the content Sam keep it up bro! ❤❤❤
stuff in the golden box is a german chocolate thingy called konfekt. you wanna put that in the refrigirator and eat it cold. its ment to be eaten like that.
just finished a crash test goat video and not sammit uploaded 😲
i really like the vlogs and behind the scenes.
Can’t wait for may swift getting build and keep it up Sam u got it😊😊
I drink my coffee just like you just alot more sugar !
Or cut it in clamp a rubber hose in there or replace the steel line with rubber hose power steering hose obviously
What's up $am? I just have to ask how is Mae doing with the food cravings while with baby?? Any 1am trips for crazy food demands!? Been there, done that! Congrats again you two, soon to be three!!
Der kühle Genuss-Eiskonfekt.. where does that come from? 😂
Godamn japan has lovely cars
9:20 Sammit paint the truck or wrap it with livery to match your Pro drift Car 🚚💨
Sam what ya doing with the two door R32 in the storage yard ? Send it to me as an Xmas pressie ! Combined with my R32 wreck I could make a street missile .
very cool 86. we see the white panda and now we have a red panda version.
Reckon we'll see that AE86 in Adams videos soon? That was my first thought.
Big fan my dude, been watching your for a long time now. Love the content. If you ever want a free drink and meal when I'm in Japan next (March) just let me know, that would be a small thanks from a Kiwi fan. Keep it up!
10:28 isn't something leaking?
You don’t deliver your products over seas ?
VLOGMAS!!!
Would be awesome if you found few plp to offer the knives on your site even if took some time be worth the wait
Just clean that hole with sandpaper and if its aluminum use an alumaweld stick and patch it or if it's something else sand it flux it and solder it
Wouldn’t it worth pressure washing the truck so all that power steering fluid isn’t going to degrade everything. I would wash and then spray silicone spray on everything to lubricate it all nicely after washing, since using any cleaner or detergent will get rid of the nice lubricating properties.
Coffee with a pre- grinder is so much better than instant .Thank god sammit didn't fall for that Chinese kamikoto knife scam and got a propper knife .
Uploaded 1 minute ago 🔥
Yeah the JB will work I use it on my BMW on a brake line that say they won't work and it worked for 2 years
Nice shirt 😊
Quick question, why don’t you back the truck inside over night when you have things/cars on it?????
A shame that it's far too hot for Christmas sweaters here, and can that coffee be any good if it needs sugar, and milk?
Oh that one but not quite that one
that 86!!! i neeeed it
Anyone know if the intro is an actual song?
Sammit whats do 86's go for these days in japan? (AUD)
Sam is now a Christmas elf lol
Always hand wash and dry. Damascus steel needs to be taken care of.
WHO made that awesome damascus knife ?? whats the brand ?? also in the market for a 3 -4 knife set !
get a damasteel kitchen knife but it will cost like 10x ur current vg10 damascus
Milk in your coffee, cmon man, thats not coffee! :)
what bodykit does your formula s15 have
Please get an 86 Sam!
Think Sammy has finally migrated! He's forgotten that it's summer over in the land down under! ;)
Just take a piece of 3/8 brake line and bend it and hook it up
bro is like 80% boring stuff and 5% cars...
May said you look like a Starbucks cup😂
Need that ae86 details asap!!!!
You should make Christmas tee shirts for us in Australia
Is it possible to bring merch to lz's event? It would be an absolute move!
You should buy a Toyota hiace and use it as a merch van
Is that an advan approved repair? 😆
Can anyone let me know where I can find updates on the car meet and festivals?
i like the minnesota shirt!!! i live there lol
He needs some milk!
May laugh tho makes it more funny
I have one of em😋
why dont you just get a brake line and unions to fix it?