Happy that they got that out so quickly for you. Unfortunately, I ordered a skid from a company, and would almost guarantee that it's the company you are referencing for taking an absurd amount of time. Now I am stuck and likely going to miss out on a huge 3k job because they are dicking me around too.
Arkansas Washing Equipment. It's not getting better it's getting worse! They are straight up not delivering to people. Lawyers involved, attorney general.. the whole crew! It f'ing sucks!!
@@giovannireynolds6780 He is going to be going to prison. This shit is unraveling and it looks like he has stolen north of 500K from people just like me. He is 100% off the grid now. Business, poof... gone!
Just put a deposit down for this rig but upgraded to a gas roof pump. The guys at ICE have been awesome. Should have it in Florida in 2-3 weeks. Super clean looking!
@@theo.g8379 they gave me a good price and I upgraded to the gas roof pump instead of the 12v Softwash system, just under $23k. ICE are super responsive and give great customer service. The aluminum fuel tank that came with it started leaking on a weld and they replaced almost immediately without question. The skid has paid for itself already. Very happy with everything. The 225 gallon tank so far keeps up with both machines washing so as long as the customer has good pressure and flow. My SW system is dialed way down for most roofs unless I have a two story and that thing slings it right on but you have to dial it in when u get it. It took me a wash or two figure it out. It comes dialed in at full pressure. I dial the pressure to almost to nothing and lower the engine speed to half and get a 12v system result but it’s awesome if you have to reach way high. Plus they gave me a 2’ longer trailer at no extra cost.
Great looking rig and set up. The only thing is with a 225 gallon tank I always seem to run out of water. I switched to a 325 gallon and have had no issues
Can you let us know the out the door cost for that? Its perfect. Not to much, not to little stuff. Just the sweet spot of what is really needed. I'm wondering if I can afford it. haha.
Still learning.. Having a separate SH container and soap container how does the downstream pull from both containers and not get to much soap without a blend system? Thinking about manual batch mixing. Thx for any clarity on this.
Many will copy that trailer setup, Kyle! How much for the complete trailer and wash equipment package? I sold those 02 Rangers new off the Ford lot way back then. That's definetely a cherry one.
Is there a way you could add the build sheet here or in a link? I looked at their website and there’s nothing like what you have, I know it’s custom but would like to have a blueprint for something like this, thanks for the time👍😁
@@softwashtv6315 kinda figured, I’d love to pick your brain, I need light weight and that’s the perfect size!! I’d be willing to pay you for your time with what you did on this build. Reason why is I am new to this and have been watching lots of videos and visiting tons of companies that build these trailers and honestly this is the cleanest for the size of trailer that I have found, I don’t know everything to get and put it together the way you did, so I believe paying you for some of your time is worth it👍
@@softwashtv6315 Could be a good video topic. It’s common to see people applying hot mix on driveways without a respirator. Or they’ll do the roof wash while walking the roof without a respirator. Long term exposure to SH is definitely not good.
I need advice on a good pressure washer. It seems I can only afford a 4 gpm pressure washer. I seen a video of someone put together a 8 gpm for about the same price. Any info on a good system w/ unloader bypass for a great price? Or a proven build? I appreciate any info.
@@softwashtv6315 Unfortunately, I only have $2,600 to work with. With getting a couple other necessary pieces equipment, I was hoping to be somehow build one for a reasonable price. I appreciate your reply.
I went with a 4gpm pressure with the intent to build one later due to time and money. Do you have a recommendation for a bypass setup to return back to buffer tank?
@@softwashtv6315 hey boss great videos. iam from the midwest but I want to order the same ''new rig"" you have. who do I call??? please help bud. thank you sir!!
@@softwashtv6315 at least you have one though I ordered a trailer from Arkansas washing equipment dude got the money and went ghost no one can find him and he has LOTS of people's money and they haven't gotten their equipment
@@softwashtv6315 Yeah bro, it’s been crazy. So far I know there is around 55 people that paid him and never received their equipment. More people keep coming out of the woodwork everyday though!
✅ SOFTWASH TV PRO
Softwashtv.passion.io
✅ 1 ON 1 COACHING CALLS
calendly.com/kylemaguire/
How’s Roofio working out/holding up Kyle?
Any trouble with the VRT unloader staying mounted on the pump vs a block unloader?
Perfect combo rig!
Very slick Kyle.
Best of luck with her.
Where is your company sign with your phone number for that new trailer?
How much did they charge you out of the door?
my price was special because I buy a lot of equipment from them. but Patrick at ice can get you a estimate if you want one!
That’s slick
Is there an issue using remco 8 gpm over the 5 gpm pump for the price
That’s a dope rig my boy God bless you , I see the Ranger glowing up soon
Hi Kyle, I'm a huge fan of yours. I'll be your new student. Quick question, with the new Rig you acquired, can you do both Soft and Pressure washing?
yes sir it has a pressure washer and a soft wash system
How much did the rig cost?
Was this a special build or what?
How much did the rig cost?
What size is that trailer?
Happy that they got that out so quickly for you. Unfortunately, I ordered a skid from a company, and would almost guarantee that it's the company you are referencing for taking an absurd amount of time. Now I am stuck and likely going to miss out on a huge 3k job because they are dicking me around too.
in a similar issue, whats the company name start with....😏
Bro I waited 10 months won’t name who but their letters are A.w.e 😂
Arkansas Washing Equipment. It's not getting better it's getting worse! They are straight up not delivering to people. Lawyers involved, attorney general.. the whole crew! It f'ing sucks!!
@@JoshParkerWI not surprised. I like Shawn a lot but they just aren’t organized he grew too quick I hope eventually it changes.
@@giovannireynolds6780 He is going to be going to prison. This shit is unraveling and it looks like he has stolen north of 500K from people just like me. He is 100% off the grid now. Business, poof... gone!
Amazing set up. Watching your channel from Vancouver BC Canada 🇨🇦
Among the hundreds of rigs on YT this is among the cleanest and most-well thought out! Bravo from Buffalo, NY
With the engine elevated, does it still gravity feed correctly? Beautiful trailer!
how much did Rufio cost you in all?
my price was special because I buy a lot of equipment from them. but Patrick at ice can get you a estimate if you want one!
Love that new rig, great video..still love maduca..
Hi, Where can I get a build similar to this one?
Thank you for your videos. That's a nice set-up you got there bud
That’s a good lookin Ranger.
So sweet. Just needs some signage so customers can envision it cleaning their house
can you soft wash with this new rig?
Choooo i like that aluminum
Sweet rig Dude! Ranger is pretty nice as well!
Congratulations on the new trailer!
Whole set up is bad ass man
bro that rig is SICK
Do you downstream stucco, or softwash? If you softwash, what percentage of SH do you lay on it?
depends on how dirty it is. 3-4 %
Just put a deposit down for this rig but upgraded to a gas roof pump. The guys at ICE have been awesome. Should have it in Florida in 2-3 weeks. Super clean looking!
jhow much did you pay for the whole set up?
@@theo.g8379 they gave me a good price and I upgraded to the gas roof pump instead of the 12v Softwash system, just under $23k. ICE are super responsive and give great customer service. The aluminum fuel tank that came with it started leaking on a weld and they replaced almost immediately without question. The skid has paid for itself already. Very happy with everything. The 225 gallon tank so far keeps up with both machines washing so as long as the customer has good pressure and flow. My SW system is dialed way down for most roofs unless I have a two story and that thing slings it right on but you have to dial it in when u get it. It took me a wash or two figure it out. It comes dialed in at full pressure. I dial the pressure to almost to nothing and lower the engine speed to half and get a 12v system result but it’s awesome if you have to reach way high. Plus they gave me a 2’ longer trailer at no extra cost.
Can you give us and details on pricing for the rig with gas roof pump. I’m very interested as well.
How did the new set up go?
@@heyricksander so far so good, I did build a 12volt softwash system on it. Overall I’m happy with the rig.
Nice 😎🦾💯💯💯
Great looking rig and set up. The only thing is with a 225 gallon tank I always seem to run out of water. I switched to a 325 gallon and have had no issues
Hi, aren't you plugging into the customer's water? Very curious.
Beautiful rig buddy! #goals
Can you let us know the out the door cost for that? Its perfect. Not to much, not to little stuff. Just the sweet spot of what is really needed. I'm wondering if I can afford it. haha.
my price was special because I buy a lot of equipment from them. but Patrick at ice can get you a estimate if you want one!
What about a air diaphragm 10 gal per minute pump for soft washing and roof wash?
I has air before. its great but I prefer 12 v to air
Clean and simple.
What is the cost of your main rig and the 10ft trailer setup?
prob close to 80 g
Nice and simple! Sweet set up.
Still learning.. Having a separate SH container and soap container how does the downstream pull from both containers and not get to much soap without a blend system? Thinking about manual batch mixing. Thx for any clarity on this.
That's what the manifold is for.
@@oneshotgrow the manifold is for the 12 volt. Not the pressure washer.
Nice and clean
Nice
Sweet setup
Quote --> "I don't use 12V to clean the house, I down stream". What are you using to down stream to or from the 8GPM pump?
I down stream with the pressure washer . the soft wash system is its own dedicated pump
What does down stream mean?
What are you using to light up the tank?
fishing light off amazon
Many will copy that trailer setup, Kyle! How much for the complete trailer and wash equipment package? I sold those 02 Rangers new off the Ford lot way back then. That's definetely a cherry one.
thanks bro. my price was special because I buy a lot of equipment from them. but Patrick at ice can get you a estimate if you want one!
@@softwashtv6315 Sort of figured that was the case. I'll check into it. 👍
Is there a way you could add the build sheet here or in a link? I looked at their website and there’s nothing like what you have, I know it’s custom but would like to have a blueprint for something like this, thanks for the time👍😁
no I don't have a build sheet. I just called them and told them what I wanted
@@softwashtv6315 kinda figured, I’d love to pick your brain, I need light weight and that’s the perfect size!! I’d be willing to pay you for your time with what you did on this build. Reason why is I am new to this and have been watching lots of videos and visiting tons of companies that build these trailers and honestly this is the cleanest for the size of trailer that I have found, I don’t know everything to get and put it together the way you did, so I believe paying you for some of your time is worth it👍
You wash houses in a respirator?
I thought that I was the only one lol.
your not alone. I wear it every job
@@softwashtv6315 Could be a good video topic.
It’s common to see people applying hot mix on driveways without a respirator. Or they’ll do the roof wash while walking the roof without a respirator.
Long term exposure to SH is definitely not good.
Nice!!!
I need advice on a good pressure washer. It seems I can only afford a 4 gpm pressure washer. I seen a video of someone put together a 8 gpm for about the same price. Any info on a good system w/ unloader bypass for a great price? Or a proven build? I appreciate any info.
whats ur budget bro?
@@softwashtv6315 Unfortunately, I only have $2,600 to work with. With getting a couple other necessary pieces equipment, I was hoping to be somehow build one for a reasonable price. I appreciate your reply.
I went with a 4gpm pressure with the intent to build one later due to time and money. Do you have a recommendation for a bypass setup to return back to buffer tank?
Nice bro, how much is that badass rig
my price was special because I buy a lot of equipment from them. but Patrick at ice can get you a estimate if you want one!
@@softwashtv6315 hey boss great videos. iam from the midwest but I want to order the same ''new rig"" you have. who do I call??? please help bud. thank you sir!!
Literally only missing a ladder rack and it's perfect
ur right bro! thank you
@@softwashtv6315 at least you have one though I ordered a trailer from Arkansas washing equipment dude got the money and went ghost no one can find him and he has LOTS of people's money and they haven't gotten their equipment
Dude. Wtf I just read all about that on Facebook. Sorry to hear that bro. Did he skip town? Has anyone went to his shop
@@softwashtv6315 they said his shop is cleared out the police are looking for him
@@softwashtv6315 so I'm out 15000 and have nothing to wash with and I'm sure alot of the other guys are in the same boat as me
9 months on my skid build and I’ll never even be getting it! Choose your builder wisely fellas!
Awesome build Kyle, can’t wait to expand my business!
Let me guess.... Arkansas? If so, you in the FB group with the attorney and police involved?
@@JoshParkerWI yessir.
@@ApexPowerwash damn bro I'm sorry. I read all about that. do you know how many others there are that got screwed out of money??
@@softwashtv6315 Yeah bro, it’s been crazy. So far I know there is around 55 people that paid him and never received their equipment. More people keep coming out of the woodwork everyday though!
@@ApexPowerwash Same here Apex dude got all my money and i have no trailer ... Made a video on my page I'm pray he sees it
What size trailer is that?
Watch the video
😀 7710H - 77" x 123". Thanks for all the good content brother. Congrats on the new rig!
Thanks for the support Mathew
Congratulations 🎉🎉🎉🎉🖤🖤🖤🖤🖤🖤
How much was the rig out the door?
Keep up the great work! Do you plan on wrapping your ranger?
That's the plan!