i know Im asking the wrong place but does someone know a method to get back into an Instagram account..? I was stupid lost my account password. I appreciate any tricks you can give me.
For the first bend 10deg which u did at 2 1/2 inches did you still use the multiplier x6 I don’t Quite understand how it works?? How do u work out 2 1/2 inches Thanks New to conduit bending
He did it by eye, but the correct way would have been to measure an arbitrary amount from the end of the pipe first, which in the case, he chose 2" . Then using the chart @ 10 degrees (multiplier x6) Most box knockouts are 3/8" height. 3/8" x (6)= 2 1/2" You should make a second mark. Bend both marks @ 10 degrees. When you have been bending as long as he has you get a feel for it and no longer need to measure for box offsets.
Yes I’ve done solar work couple years back. Using pvc pipe, with the heater. I will be posting about that as well soon in my upcoming videos, I already ordered a board and few supplies to do work in my backyard on the board
@Kahit kunting pagtingin. From the box to the edge before the 8" rise was 16". And from that point to the far wall was 44". On a 30° offset bend, which is two 30° bends in the oposite directions. The multiplier for a 30° bend is 2, so 8x2 = 16. So he measured 16" from the box end of the pipe and made a mark. And from that mark he measured another 16", which is the 8x2 multiplier mark. I just started learning this stuff myself, so I hope I explained it in a way that makes sense.
he works for a merit shop if you look up merit in the dictionary it's means the quality of being good or worthy especially so as to deserve praise or reward. merit shop union shops are great I am in local 22 Nebraska journey man license electrician in Nebraska so stop being a hater
Excellent work brother! Thank you 🙏
Damn bro what a small world 1st we start working together at Dynamic now u educating people thru youtube thats poppin bro keep it up
Hey what’s up Brian long time no see, thanks a lot for watching. Working on more videos
Thank you this helped me out a lot, you should continue to post more videos
Watching homie struggle in the Runabout, I felt that on a real level 😂🙏
i know Im asking the wrong place but does someone know a method to get back into an Instagram account..?
I was stupid lost my account password. I appreciate any tricks you can give me.
@Ulises Shane instablaster =)
Nice demo. Thank you. Helped me!!
Beautiful just beautiful. Thank you
Thank you for watching, I’m working on more videos as we speak.
Good job!!! flip your bender when using the star
For the first bend 10deg which u did at 2 1/2 inches did you still use the multiplier x6
I don’t Quite understand how it works??
How do u work out 2 1/2 inches
Thanks
New to conduit bending
He did it by eye, but the correct way would have been to measure an arbitrary amount from the end of the pipe first, which in the case, he chose 2" . Then using the chart @ 10 degrees (multiplier x6)
Most box knockouts are 3/8" height.
3/8" x (6)= 2 1/2" You should make a second mark. Bend both marks @ 10 degrees.
When you have been bending as long as he has you get a feel for it and no longer need to measure for box offsets.
3/8 x 6 = 2 1/4
I dig it 😎👌🏾nice work
Thanks for listening
Man my first time bending emt on a jobsite rather than at school. And I fucking suck.
nice video my man, thank you bro, you know the game
Thank you for watching more videos coming in
Bro keep an eye out for the guy on the lift…… looks like the first day he’s been on one! Stay safe
hey great job for bending can you try back to back 30 degree bend
Great man keep it up
Thank you very much, Yes I will be buying materials to do more electrical videos at home as well.
Hey wassup man. I like the bend. How old are you can u ask?
Thank you, I was 25 years old at that time
Don’t mind the guy running over stuff in the background while he is doing the Z bend
You in ny??
Yes, I’m in New York
Just to be clear,plumbers bend pipe.We electricians bend conduit.You will not find pipe inside the code book pertaining to conduit!
where from 16
Where are you frome ?
Hello love birds, I’m from New York. Most of my videos is on site construction in Manhattan NY
Good work bro.. i m also electrician in Kuwait but here in kuwait we use pvc pipe
Yes I’ve done solar work couple years back. Using pvc pipe, with the heater. I will be posting about that as well soon in my upcoming videos, I already ordered a board and few supplies to do work in my backyard on the board
The art of pipe bending??? What???? LMAOOOOOOO
Thanks lol
i dont understand your calculations 30x2=8 where from 8
@Kahit kunting pagtingin. From the box to the edge before the 8" rise was 16". And from that point to the far wall was 44". On a 30° offset bend, which is two 30° bends in the oposite directions. The multiplier for a 30° bend is 2, so 8x2 = 16. So he measured 16" from the box end of the pipe and made a mark. And from that mark he measured another 16", which is the 8x2 multiplier mark. I just started learning this stuff myself, so I hope I explained it in a way that makes sense.
Scab nation LMAO
he works for a merit shop if you look up merit in the dictionary it's means the quality of being good or worthy especially so as to deserve praise or reward. merit shop union shops are great I am in local 22 Nebraska journey man license electrician in Nebraska so stop being a hater
Q electric hire in all states, keep the vids coming
Thank you, will do 😉
First mistake always use a pencil dam try hards😂
2nd mistake, always bend close to your body so you don't bow your pipe. Bruh, you ain't ready yet
No way you a foreman tho
I DON'T see it either
Yeah that shits impossible
Took the words out my mouth ... he knows alot about the technical part like multiplying the measurements by the shrinkage, I just measure and bend
กิตติพล ขาวงาม
Nowhere near a level of actually teaching anyone.
How to shoot a crappy video with a bunch of demo hammers running.
Thanks for watching
E.M.T is the easiest to bend nothing difficult here
Get a better level pleb! Lol
how long it took you to bend like that...