I'm sorry, I'm fascinated, how can you set decals crooked? The left wing on top - the Czechoslovak sovereign emblem is rotated at least 25 degrees! (16:50) Every one of them is somehow wrong... The red-white edge should always follow the forward direction, horizontal with the axis of the aircraft. Look at the plan.
Hi , if you finished Painting then varnisch , let it dry 12 hr then do decals and let them sit also for 12 hr , then varnish again and 12 hr later you good to go on weathering, i think i just cut out some details in the Video because its to long
I usually let every coat dry at least 6 hours , for the black gloss coat i recommend using Mr Hobby Gloss H-002 , i tried to use AK Black Base coat , but i have some drying problems with it after hitting it with AK Aluminum
I had lots of trouble with them not drying but then watched Phil Flory say should really apply them in thin layers. Avoiding passing over areas where it already has been applied. Look at it as plating rather than painting. Dukel Hobby Albatros build on youtube shows the proper Xtreme Metal application.
@@TheModelGuy Yeah i watched Dukel Hobby too, we can defenetly learn a lot from him , he is a true master modeler here is a link to his Channel: ua-cam.com/channels/CfcuCnYGFg9-qlx1cEm7yQ.html
I use "Paint" in Windows ,you can change the precentage of the scale , then i print one Paper leaf and hold a Wing or a fuselage half against the leaf , then you can see if it the right scale or not and adjust in Paint again
Nice result . As already said the extra effort on the rivets was worth it. You dont see these being made often and I have one in the stash . Ugly aeroplane but a good model. Thanks.
amazing work！where could i find faseluge pin pic？thx a lot！
Perfectly outclassed man ❤❤❤❤
I'm sorry, I'm fascinated, how can you set decals crooked? The left wing on top - the Czechoslovak sovereign emblem is rotated at least 25 degrees! (16:50) Every one of them is somehow wrong... The red-white edge should always follow the forward direction, horizontal with the axis of the aircraft. Look at the plan.
the position of Czechoslovak characters has its rules, it's bad on the model, it's a shame
Great!! No varnish between decals and weathering? Thank you very much. Greetings from Spain
Hi , if you finished Painting then varnisch , let it dry 12 hr then do decals and let them sit also for 12 hr , then varnish again and 12 hr later you good to go on weathering, i think i just cut out some details in the Video because its to long
@@Headmod Thanks for your answer and clarification!
Extra Super MIG-19S 100% AIR Force Czechosłowacja.
how do you get the model pls reply bc i wanna get the modek mig 19s is my fav fighting plane
Nice work ! I just picked up my mode today,..and I will do a Pakistan Air Force version Decals.
Nice build, but why are the nationality decals in such random positions?
where the brake flaps had to insert a life-giving gum. I adjusted and glue
How long are you letting the AK Xtreme Polished Aluminum dry before hitting it with clear? I keep having some wipe off days after its applied.
I usually let every coat dry at least 6 hours , for the black gloss coat i recommend using Mr Hobby Gloss H-002 , i tried to use AK Black Base coat , but i have some drying problems with it after hitting it with AK Aluminum
@@Headmod maybe I have a bad bottle. I've let a mule dry untouched for three days and it still lifted with de-tacked washi tape in a few spots.
I had lots of trouble with them not drying but then watched Phil Flory say should really apply them in thin layers. Avoiding passing over areas where it already has been applied. Look at it as plating rather than painting. Dukel Hobby Albatros build on youtube shows the proper Xtreme Metal application.
@@TheModelGuy Yeah i watched Dukel Hobby too, we can defenetly learn a lot from him , he is a true master modeler here is a link to his Channel: ua-cam.com/channels/CfcuCnYGFg9-qlx1cEm7yQ.html
and where the guns are on the fuselage under the cockpit, it was necessary to make it darker there is always dark metal
Roundels !! Very bad alignment
nice , nice , nice job
The extra effort you put in by adding the rivet details pays off
Nein
Excellent 👍
but the model turned out cool
Very nice build and finish 👍
Subscribed....wonderful build.
Superb result
Excellent finish..👌
Where can I find these rivet blueprints?
You can find some on Pinterest , just give in the google search for pictures : Mig 19 rivet plans
@@HeadmodThanks, I find some but dont know how to print it in 1/48 scale
I use "Paint" in Windows ,you can change the precentage of the scale , then i print one Paper leaf and hold a Wing or a fuselage half against the leaf , then you can see if it the right scale or not and adjust in Paint again
Nice work, looks pretty cool!
*Nice metallic result!*
Great work!
Great job looks really good, where did you get the painting stand?
The Stand´s you can find here: > www.vertigo-miniatures.com/vertigo/eshop/15-1-JIGS
Thnx very much for the info, I've been after one of these for some time, I'm a sub & have been for quite some time.👍
Beautiful outcome. Did you polish the metal finish?
Thank you , no i didnt polish the Metal Finish , but i polish the plastic before applying the Gloss Black coat
Good hangar base. Did you build it?
No , its only background for Photo ^^
Where do you get your tarmac base from? Are they available on internet?
Yes , i buy my bases at : www.coastalkits.co.uk/newstore/ they also avalible on Ebay
@@Headmod Thank you for your help :D
отлично.
Fantastic !Best wishes from Ukraine ! 👍👍👍👍👍👍
Nice result . As already said the extra effort on the rivets was worth it. You dont see these being made often and I have one in the stash . Ugly aeroplane but a good model.
Thanks.