You're not wrong, a massive progress on the 80. It's great to be surrounded by brilliant experts of their craft. It makes projects like these less of a headache. Good one team.
SHAUNO's BACK! On ya mate!!👍👍👍 If you notice, Burto always does his best work when Shauno is assisting...plus Shauno is right on the ball as shown in this vid with the oil fill-up and sump plug..maybe put him on as part time/casual?😊 Just watching how all the guys working in the workshop there are full on dedicated pros! Todds should be doing fab work on F1s! Josh the wiring guy is just as important to a vehicle as what a performance shops dedicated engine tuner is.. Birdo is just the jack of all mechanical.. If your ever going out remote 4x4 touring, these are the guys I'd want tagging along in the the crew, great work fellas! 👍👍👍
The lady of the house sure is going to have an awesome mall crawler. While you guys are busy with electricals, put some decent security measures in place.... 😎🤙
Hey lads, you should definitely be running a vac canister setup and a one way valve for the brakes. Being turbo now if you don’t have a valve you will blow up the booster 🤙🏽
Love this build putting a barra on a 80 chassis , Q why did you end up getting the territory motor was that just for the sump ? Thanks Demi is going to love this beast
Duno if it's just me but at the start of starting it sounds like one cylinder is down on compression? Could just be a sticky valve from sitting hopefully. Be interesting to see a compression test done on all cylinders maybe?
@@flatoot if you listen closely to the 'choom choom choom' of the compressions, one of them is a 'chim' and it's always the same one, 5 chooms and one chim
@@dcf476 I know the imbalance you're talking about. I just don't think it's concerning. Especially if it's been sitting. Last engine swap I did, my engine had sat for 2 years since I bought it. V6 and the compression test was terrible on a few cylinders. I was worried I'd bought a heap of junk. But it fired up nicely and runs good.
Don't forget one way valve in vacuum line to brake booster. You don't want 50psi blowing into the booster..... You might need hydraulic brake booster so she can stop this thing.....
That seat belt, if you pull it out completely, use some brake line clamps to hold it fully retracted and then get a hot bucket of water with laundry detergent and a brissel brush to scrub it, might need a couple changes of water. You can use brake cleaner as well with a gerni but I find the laundry detergent does a better job
ev,s are not sustainable.. they cost more to produce, like 3 times the amount, of a gas car.. they burn,, they dont last,, they have no range.. this goes for solar, wind, as well.. bs ideas.. look up re cycleing them.. its a fkn joke.. the w.e.f., greens,, u.n., nato, gates, schwab,, all need a ticket to mars...
You know mate. If ya just get in have a go you will be able to do this shit ya self. You will never learn doing what you do... half the shit these clowns say i wouldnt take there word for everytjing like you do. Cause half time its wrong info. If ya did it ya self ya will learn your self. Not just what some one reads on facebook like them lads have done
You're not wrong, a massive progress on the 80. It's great to be surrounded by brilliant experts of their craft. It makes projects like these less of a headache. Good one team.
Thanks mate!
The boys doing a good job of explaining the work so it’s easy to understand for a novice
How quick 30 mins go buy when the video is fun, that engine sounds brutal. Burto FTW
Cheers for watching!
Lol at Burto getting cocky with the oil then spraying it everywhere 😂
And that smile when you find the spark wire. Priceless!
I love it when the smartest guy there acts simple.
Legend.
SHAUNO's BACK! On ya mate!!👍👍👍
If you notice, Burto always does his best work when Shauno is assisting...plus Shauno is right on the ball as shown in this vid with the oil fill-up and sump plug..maybe put him on as part time/casual?😊
Just watching how all the guys working in the workshop there are full on dedicated pros!
Todds should be doing fab work on F1s!
Josh the wiring guy is just as important to a vehicle as what a performance shops dedicated engine tuner is..
Birdo is just the jack of all mechanical..
If your ever going out remote 4x4 touring, these are the guys I'd want tagging along in the the crew, great work fellas! 👍👍👍
Thanks for watching mate!
@ 1.36 when the question arises "why no spark" OBVIOUSLY tyre pressure, it's always tyre pressure 🤣🤣🤣 Now I'll finish watching the video 🤟
This rig i recon will be my favourite build love the GQ td. This Barra looks sick
Keep it up mate
Thanks mate!
The lady of the house sure is going to have an awesome mall crawler.
While you guys are busy with electricals, put some decent security measures in place....
😎🤙
Great video again.
Whenever Shaun breezes in he looks like a lost puppy looking for some friends…if he don’t have a knick name call him pup!
no doubt TT u have some gud mates. even better, they come with the skills required. Burto n Shauno, classic.
Looks mint great work boys
Well done team .Cheers
Good to see that this rig will have brake vacuum pressure
Cool epp bruz your boys got alot of knowledge too thanks for sharing
Thanks for watching!
Awesome ep and set up guys, and you mother fudges are funny.
Thanks mate!
I reckon , this Barra engine conversion is more complicated than the NASA Space program….😩 and all that spag bol wiring makes my toes curl!
Respect 🫡
There is a lot going on!
Great vid - Excitement Mounting. Bank account lowering!!! :-)
Sounds so good! 💪
Cheers mate!
Hey lads, you should definitely be running a vac canister setup and a one way valve for the brakes. Being turbo now if you don’t have a valve you will blow up the booster 🤙🏽
Thanks for the tip mate!
Great swap for the early 4.0 litre petrol 80s.
Sounded mint she fired up nice and throaty 👍👍👍
Coming along nicely 🤠🤠.
Where did you get the battery terminal/clamps from
Sounds like it has a gallop, might be worth doing a compression test.
Coming together now mate, gunna be good
Getting excited!
can someone tell me whats the difference between the pre 08/91 80? will the other kits fit up and still give desired lift? awesome vid tho!
Love this build putting a barra on a 80 chassis , Q why did you end up getting the territory motor was that just for the sump ?
Thanks
Demi is going to love this beast
That was just what I had available mate, had picked it up a while back for cheap
@@TylerThompson90 Ah ok thought you had to get a different motor for some reason
Lot of work, but fantastic progress. 👍👍
Duno if it's just me but at the start of starting it sounds like one cylinder is down on compression? Could just be a sticky valve from sitting hopefully. Be interesting to see a compression test done on all cylinders maybe?
Not too sure but hopefully not 😬
@@TylerThompson90 yeah fingers crossed just needs a good run to settle things in again 🤞😎
I didn't hear anything concerning
@@flatoot if you listen closely to the 'choom choom choom' of the compressions, one of them is a 'chim' and it's always the same one, 5 chooms and one chim
@@dcf476 I know the imbalance you're talking about. I just don't think it's concerning. Especially if it's been sitting. Last engine swap I did, my engine had sat for 2 years since I bought it. V6 and the compression test was terrible on a few cylinders. I was worried I'd bought a heap of junk. But it fired up nicely and runs good.
What is the noise deadening material you used on the build?
Carbuilders sound deadening
Well done, she’s gonna sound pretty mean by the sound of it
Getting keen!
Does Burto have his own UA-cam channel? I could listen to that bloke talk shit all day 😂
How good is it to have great mates
Probs the only youtuber not sponsored by kinchrome lol
watching this is making me wanna buy and 80 nd convert it
Any reason you didn't go for a twin scroll turbo for quicker boost?
That would be a question for Burto
was this meant to be a daily driver?
#LongLiveTheMechsnicalDiesel!
The turbo grocery getter look out Coles
Black on graphite?
Don't forget one way valve in vacuum line to brake booster. You don't want 50psi blowing into the booster..... You might need hydraulic brake booster so she can stop this thing.....
Cheers for the tip!
What’s the name of the song at the end of the video, something about a chicken crossing the road 🤣
Time to let Burto off the leash I think..Should do a Burto trip
Got a couple of trip episodes coming soon
@@TylerThompson90 Youse are both living the dream..
Dude, how much have you spent so far?
about 7 billion dollars 🤣
That seat belt, if you pull it out completely, use some brake line clamps to hold it fully retracted and then get a hot bucket of water with laundry detergent and a brissel brush to scrub it, might need a couple changes of water. You can use brake cleaner as well with a gerni but I find the laundry detergent does a better job
Definitely don’t use brake cleaner with a Gerni unless you want to damage the belts integrity
Looks like a big job marrying Ford stuff with Toyota, the wiring alone would be a nightmare
Yep sure is!
Forget the 80, let's get some more of the Vincent hiding in the background. Fire that up.
💪🛠️
Yewww
*First crank
you're using aerostart to fire up a turbo charged engine? Are you mad??
Where's the problem?
It's not a diesel it's not going to run away
Turbo barra power good = fuel heavy 😢
Won't be as bad as an FZ haha
Love your vids but why keep holding that damn annoying microphone…
My question is, why is me holding a microphone so annoying 🤣
@@TylerThompson90 lol now u got me thinking 🤣
Sad that all this type of thing will be unroadworthy according to the government in the next 15 years, what a load of shit.
ev,s are not sustainable.. they cost more to produce, like 3 times the amount, of a gas car.. they burn,, they dont last,, they have no range.. this goes for solar, wind, as well.. bs ideas.. look up re cycleing them.. its a fkn joke.. the w.e.f., greens,, u.n., nato, gates, schwab,, all need a ticket to mars...
You know mate. If ya just get in have a go you will be able to do this shit ya self. You will never learn doing what you do... half the shit these clowns say i wouldnt take there word for everytjing like you do. Cause half time its wrong info. If ya did it ya self ya will learn your self. Not just what some one reads on facebook like them lads have done
yayyyyyyyyyyyyyyy