My shower would not heat up. It had me scratching my head since the bathroom was remodeled some time in the 90's so I didn't believe it had an anti-scald mixing valve. After watching this video I realized that the pressure balance feature of the cartridge might be the cause. Sure enough, when I removed the cartridge I found that the hot passage was blocked. A quick trip to Home Depot for a new cartridge and I am back in business with steamy hot showers. Thanks for all the detailed pictures and narrative. It was very helpful.
Thank you for the video. 46-4042 for Price Pfister is the Single Lever Cartridge (all-in-one unit) made by Kissler & Co. and 974-042 ox8 is the Universal sold at Lowes and HD.
This little ua-cam.com/users/postUgkxVoi3B4CB6Oygq1-vo4OTL1M_M5JkrXif tub works perfect in our 6 x 6 shower and is easy to get in and out. Also easy to drain.
Late to the party but need to change both a bath faucet and shower valve. Mine are Pfister also but look different once the cover is removed. You do a great job of describing and using the pointer while explaining what you are doing. My bath faucet looked exactly as yours when I removed the cover. Ends up that on mine it was a big flat washer that had completely rusted and just fell apart. People at both Home Depot and Lowes said there was not supposed to be anything there. They didn't have anything matching in the stores so I could not disagree with them. Will tackle the shower valve if this one works correctly. All of your videos were very helpful. Thanks
Thanks for making this video. I have this same fixture and was having a heck of a time identifying the brand. I did call Price Pfister and spoke with someone I could barely understand. After describing the fixture they said they'd send something in 7-10 days. When I asked what they were going to send the person described only a single piece. I don't think the person knew or cared about the product so instead I went to my local Home Depot and got a Pfister pressure balancing cartridge (S74-291) and a valve stem assembly (971-250). Ten days is far too long to wait and I doubt I would have received the correct product.
I have had many different plumbing issues in my old house, just in the past year, a year ago i didnt even know i had a water shut off vaulve to fixing things myself,although your shower unit is way different then mine, i just wanted to let you know, of all the repair videos, including home depot and other profesionals, you by far were the most clear and detailed in your instruction, you should have a show
Thanks so much for your attention to detail. I must've put this thing together 3 or four times, even trying a combo of new and old parts (swapping out o-rings because new one looked thinner and felt more "brittle"). I also tried Plumber's Grease. Your little tip about cleaning and drying the area where the o-ring will make contact is what finally did the trick. Also, I tightened the screws starting with the bottom two first to make sure it was well seated as that is where it kept leaking.
Thanks for the video. This is the only tutorial that I could find that had my shower set up. For those who may need the actual part numbers for the two parts here they are: Valve Stem Assembly (971-250) - front part. Balancing Cartridge (974-291) - Back part.
Valve Stem Assymbly (971-250) is the front part. Balancing Cartridge (S74-291) is the back part. You also can just buy the newer part (974-042) which is one single assembly that replaces the two. I decided to go with the newer part as I had to replace the other ones twice in few years.
Great video. I had already disassembled mine to diagnose the problem and had determined it was a Price-Pfister. When you got the cover off I could tell right away that you had the exact same model. Your disassembly with post mordem examination of the defective valve was also very informative. Thank you so much.
THANK YOU for this video! I was also stumped with no manufacturer on the faucet and finally searched "plastic shower cartridge" and found this video. I bought the part 974042 from a big box store since I am not the original owner, and changed the 17 year old cartridge out tonight! My only issue is that there is a gap between the collar and the faucet. I think maybe when I was trying to remove it the value was pushed too far forward in the wall. hopefully nothing a little caulk can't fix. Thanks so much for the detailed video, it was a lifesaver today.
Thank you for posting AND providing the Price Pfister name. I'm in Orange County as well and we have had 2 pin hole leaks in the kitchen already. I have the same shower but luckily it wasn't corroded like yours. I'm just not getting enough hot water all of a sudden. I'm looking for ways to adjust for more got water. Will continue on the search with other videos. But this has helped me with a few things.
I was looking into how to remove the (as Pfister calls them) "pressure balancing cartridge" (the gray/grey part in your video). I replaced two of them (shower and tub, since they are separate). I was able to dislodge a dark piece, that appeared to be part of a gasket, from one of the cartridges and could not remove additional pieces that I saw, hence why I purchased new ones! When I removed them and tried to blow air through the openings both showed air flow restriction. New parts have no air flow restriction in any of the openings. I will mention your channel when I post my video. Thank you.
I thank you for this video. I have same shower valve. This is a very informative and detail with great advice. Please do not delete this video. It is helping lots of people. Thank you again.
I had exact same Valve, This video helped me a lot. They have three different parts # for the same valve, one before 97 and second between 97 to 2004 year and latest is valve made after 2004. The latest model cartridge just fits right on my older (1997 to 2004) model body.
Valve Stem Assymbly (971-250) is the front part. Balancing Cartridge (S74-291) is the back part. You also can just buy the newer part (974-042) which is one single assembly that replaces the two. I decided to go with the newer part as I had to replace the other ones twice in few years.
Thanks for your video. I could not find any name on my shower valve. Replaced heads on both showers. Went to HD and got the Unv - All in one - It fit like a glove. Could not wait for snail mail.
Thanks for the video!!! Thanks to you, I learned not only how to replace the parts but also of the life time warranty. Called PF and my parts will be here free of charge from PF in about a week. Everything they needed was on a small paper tab behind the handle which included the manufacture date.
You just unraveled the mystery of the leaking valve for us. Called the company and they're mailing me out the replacement parts free of charge. Thank for the helpful video!
I have same single handle shower valve, and the Pfister Pforever warranty was certainly good news to me! My shower has a slow leak (after 15 years!) and your tutorial made the repair very clear. Thanks!
Great video! Thank you so much my good sir. I called a plumber cause my faucet had a small leak that would leak one drop every ten seconds or so. He walked in my bathroom looked at it without touching nothing, told me it would be $1200 to fix and that he would need to cut open the drywall in my room thats directly behind the shower in order to repair the leak. I told him I'd get another quote before I decide he then told me "cool, how do you wanna pay me the $100 fee for coming out and diagnosed it" long story short the bastard got me for my $100 but that's OK you my friend have saved me the $1200 blow my pocket was gonna take from that greedy punk. The Pfister shower valve cartridge replacement part is only $35 at Lowe's or you can get it from Amazon for $23. I'm gonna record myself fixing it, time myself then send it to that filthy plumber when I'm done! 🤗 Thank you!!!
Thank You! Thank You! Thank You! My pfister shower started leaking I contacted Price Pfister and they're sending out the parts today! Thanks for making it simple and easy. Keep up the Good Work!
Very informative video. I have the same model in my home and had to replace it in 2003. Started to leak recently. Fortunately for me, I had kept the old one and the packet it came in. That contained the part numbers I needed. I did learn from this video that there is a llifetime guarantee so I'm contacting Pfister about that. It is a good day when you learn something new. Thanks for creating this video. Well worth my time watching it.
Great video -Price Pfister has obsoleted those two parts and combine them into one unit (Pfister OX8). Spent hours running around to hardware stores looking for the washer only to give up and call Price Pfister who is sending them out at no charge. Just takes 7-14 days
Thank you for your very detailed how to repair video. This video saved me money and hours of fraustration I may have had to endure. My replacment part (new replacement part is now a single piece) that was sent to me free of charge by Price Pfister. Part came from Mira Loma to my south Orange County home in just 3 days. Awesome! Thanks again!
That was one of the best repair tutorials I've ever seen from a homeowner could have left The rubber ducky Part out but being from California I understand I grew up In Downey But thank you so much
This really helped me. I was able to figure out the first parts. But I didn't understand that the second component just slid out. That allowed me to find the failing o-rings. Thank you!
This was extremely helpful as he had all the same (identifying items) problems I had. Glad he took the last piece apart also. Now I know what I'm getting into and how to fix it. Thanks a bunch.
I had the same issue. This was a great tutorial! Thanks for the tip about calling PP for a free replacement! You should be the guy who produces all UA-cam Do-It-Yourself videos!
Hey - thanks for taking the time to do this. I could not figure out the brand name of my shower and none of the big box stores had the parts that matched. I was getting ready to replace the whole thing when I say your video. Thank you!!
Man, you rock. You save me a trip to the hardware store and many hours of research. I called PFister and they are sending replacement kit for free. She stated that now it comes in one single piece unit. Thanks for sharing. The model number is 974042 balancing cartridge.
Rod Pena Thanks Rod, I think many of us are pleasantly surprised at getting a new unit under the PF guarantee. So far they've not sent the PF police after me for alerting so many people of this great freeby.
This is an excellent video ... Thank you! I really appreciate you taking the time to cut open the old parts. I will be replacing the same valve when my parts arrive in the next few days. Mine wasn't leaking but the handle became so stiff that I was concerned that something was going to break.
Masterfully done video. I don't share the same problem...I have hammer issues with my newly installed Price Pfister shower/tub valve. Just the same, I learned a lot. Thanks for the good work!
thanks for making the video I couldn't find a brand on mine either , thanks to your video I was not afraid to remove the plastic housing and found a replacement part at Home Depot!! Thank you.
Great video!!! I have never had to deal with plumbing or anything of the sort. Following the steps described in your video I could solve my problem like a pro!!!
Great video, everything was covered. The old valve is in two parts which threw me off when I first tried to repair the leaker. The video demonstrated how to take the second piece of the assembly out. The replacement valve is a single unit, part # 974042.
Thank you so much! Like you, this took me forever to find the brand, and then figure out how to replace it. Very grateful you made this. Great idea! I may do the same, so there will be at least 2 videos in the world! Thanks again!
Excellent video! Thank you for your efforts! I called Price Pfister and getting the parts under warranty. Will do the repair as following your video. You saved me a good chunk of change. Thank you!
I had the same problem trying to identify just what brand I had for a faucet. Apparently I have I also have a Price Pfisher as well. Mine just started to leak and drive me crazy. Anyway, thanks for the video, like you said there is not much out there for the DIY people like us.
Very informative video. Following the instructions in a few minutes i fixed my shower problem. Thanks a lot for making this video sharing your experience on pfister parts replacement. Maurizio
Very nicely done. I had same PF valvle and i could not find any video when did generic search. I was kind of gambling on the names and finally found your search!!. It really helped me. Thank you very mucn
Very good detailed pictorial! Alot better than the majority of actual videos posted on the same subject. I'm glad to know after watching your posting that Price Pfister actually has such a good warranty. I've always avoided buying their products after having leaking problems in the past and have mainly focused on using Delta or American Standard products because they seem to hold up better than their less expensive counterparts. Anyways, thanks for the fantastic in depth tutorial! Great job!
Thanks so much for taking the time to make this valuable video. It allowed me to identify my valve as a Price Pfister and I will be contacting them to get a new insert under the lifetime guarantee.
Literally exactly what mine looks like. Ran around all day trying to find an original replacement cartridge. Got home and the real nightmare started. On mine I pilled off that piece of black plastic, and there's a little cardboard disk back there with the Price Pfister logo and model number.
Thank you all for your evaluations. We're in the process of reformulating many of our early video's but we'll probably leave this one pretty much as-is. Just a few tweeks here and there.
excellent.... I've had an issue with these valves, 2, leaking through when the third tub was running??? Internal leaking, so I will change the valve. Like you, I had know idea what I was dealing with...make, model, where to go, etc., but this video pointed me to the right place. Thanks!
Great video. Went to Home Depot and Rona (Canadian chain) and both will give you the cartridge for free (Only Rona had it in stock). You have to ask a sales associate if you want the cartridge. Just told them it drips and they had no problem handing over the free replacement. Also the updated cartridge is one unit (instead of two).
Great video. I learned so much and am very grateful (although probably not as grateful as my wife is going to be once we nave a functioning hall bath again).
Wow thanks a million for posting this. I just got done replacing mine after watching your video. I was afraid to pull the valve out of the wall for fear I wouldn't find a replacement at Home Depot. The tip about the fire alarm shutoff was appreciated, I had my girlfriend watch the pressure while I turned the water off, no problems. Your video also showed me what the part looked like. I was actually able to find a one piece assy. at Home Depot for $24.00. No leaks, worked great. Thanks again!!!
This is great. Very clear, concise, easy to understand, very useful information. Thank you for your time in putting this together to help others. You are a star. May I ask if you have an idea of doing the same for an aqualisa shower?
Thank you for your detail and instructive video. I have an exact same type of valve and could not figure out the brand. I am going to order the replacement catridge and replace it by myself!
Fantastic video. You must live in Ladera, right? Same here... everything looks the same. From the shower valve, to the water shut off and fire system in the garage. Mine just went south too but it lasted 17 years. Guess I'm pretty lucky. I'll be calling PF today! Thank you!
The new cartridges are one piece and as low as $22.00 for OEM on Amazon. Just replaced mine yesterday after bringing back the "recommended" valve part #1 which didn't fix the problem because part #2, the black piece with 2 holes was the problem. Just buy the one piece. It's cheaper overall and fit's perfectly.
Thanks for a great video, I really appreciate your having taken the time to produce a very detailed explanation, will be very helpful! Also tip about the guarantee was great.
I've been a little surprised at the number of people interested in this subject. As far as pipes doing a "water hammer," I would suggest checking the anti-hammer tank. It's usually located close to the water heater. In older houses lacking the tank there should be a closed stand pipe that performs the same function. Be advised...I am not a plumber and have never even played one on TV. I just had the advantage of growing up poor...one learns to fix stuff or to do without.
Thanks for all of the great information! I actually just got off the phone with Kathleen at Price Pfister - she not only id-ed the part but will send me a new replacement - free. They have a great warranty there - knowing that I will buy Price Pfister parts from now on (I thought customer service was dead nowadays - but Kathleen proved that wrong). Again - thanks for posting this great & informative video! You saved me a bundle of cash! and frustration. PS - are you going to do any more of these videos? They are great.
My shower would not heat up. It had me scratching my head since the bathroom was remodeled some time in the 90's so I didn't believe it had an anti-scald mixing valve. After watching this video I realized that the pressure balance feature of the cartridge might be the cause. Sure enough, when I removed the cartridge I found that the hot passage was blocked. A quick trip to Home Depot for a new cartridge and I am back in business with steamy hot showers. Thanks for all the detailed pictures and narrative. It was very helpful.
Thank you for the video. 46-4042 for Price Pfister is the Single Lever Cartridge (all-in-one unit) made by Kissler & Co. and 974-042 ox8 is the Universal sold at Lowes and HD.
This little ua-cam.com/users/postUgkxVoi3B4CB6Oygq1-vo4OTL1M_M5JkrXif tub works perfect in our 6 x 6 shower and is easy to get in and out. Also easy to drain.
Late to the party but need to change both a bath faucet and shower valve. Mine are Pfister also but look different once the cover is removed. You do a great job of describing and using the pointer while explaining what you are doing. My bath faucet looked exactly as yours when I removed the cover. Ends up that on mine it was a big flat washer that had completely rusted and just fell apart. People at both Home Depot and Lowes said there was not supposed to be anything there. They didn't have anything matching in the stores so I could not disagree with them. Will tackle the shower valve if this one works correctly. All of your videos were very helpful. Thanks
Thanks for making this video. I have this same fixture and was having a heck of a time identifying the brand. I did call Price Pfister and spoke with someone I could barely understand. After describing the fixture they said they'd send something in 7-10 days. When I asked what they were going to send the person described only a single piece.
I don't think the person knew or cared about the product so instead I went to my local Home Depot and got a Pfister pressure balancing cartridge (S74-291) and a valve stem assembly (971-250). Ten days is far too long to wait and I doubt I would have received the correct product.
My water was always leaking and had no idea how to fix it. I came across your video, got the correct parts and fixed it nicely. Thank you thank you.
I have had many different plumbing issues in my old house, just in the past year, a year ago i didnt even know i had a water shut off vaulve to fixing things myself,although your shower unit is way different then mine, i just wanted to let you know, of all the repair videos, including home depot and other profesionals, you by far were the most clear and detailed in your instruction, you should have a show
Thanks so much for your attention to detail. I must've put this thing together 3 or four times, even trying a combo of new and old parts (swapping out o-rings because new one looked thinner and felt more "brittle"). I also tried Plumber's Grease. Your little tip about cleaning and drying the area where the o-ring will make contact is what finally did the trick. Also, I tightened the screws starting with the bottom two first to make sure it was well seated as that is where it kept leaking.
Thanks for the video. This is the only tutorial that I could find that had my shower set up. For those who may need the actual part numbers for the two parts here they are: Valve Stem Assembly (971-250) - front part. Balancing Cartridge (974-291) - Back part.
Thanks for the note.
Valve Stem Assymbly (971-250) is the front part. Balancing Cartridge (S74-291) is the back part. You also can just buy the newer part (974-042) which is one single assembly that replaces the two. I decided to go with the newer part as I had to replace the other ones twice in few years.
Great video. I had already disassembled mine to diagnose the problem and had determined it was a Price-Pfister. When you got the cover off I could tell right away that you had the exact same model. Your disassembly with post mordem examination of the defective valve was also very informative. Thank you so much.
Glad it helped
THANK YOU for this video! I was also stumped with no manufacturer on the faucet and finally searched "plastic shower cartridge" and found this video. I bought the part 974042 from a big box store since I am not the original owner, and changed the 17 year old cartridge out tonight! My only issue is that there is a gap between the collar and the faucet. I think maybe when I was trying to remove it the value was pushed too far forward in the wall. hopefully nothing a little caulk can't fix. Thanks so much for the detailed video, it was a lifesaver today.
Thank you for posting AND providing the Price Pfister name. I'm in Orange County as well and we have had 2 pin hole leaks in the kitchen already. I have the same shower but luckily it wasn't corroded like yours. I'm just not getting enough hot water all of a sudden. I'm looking for ways to adjust for more got water. Will continue on the search with other videos. But this has helped me with a few things.
THANK YOU! As a single mom, I want to thank you for your tutorial. My shower faucet just broke, and with this I was able t fix it myself. THANKS!
I was looking into how to remove the (as Pfister calls them) "pressure balancing cartridge" (the gray/grey part in your video). I replaced two of them (shower and tub, since they are separate). I was able to dislodge a dark piece, that appeared to be part of a gasket, from one of the cartridges and could not remove additional pieces that I saw, hence why I purchased new ones! When I removed them and tried to blow air through the openings both showed air flow restriction. New parts have no air flow restriction in any of the openings. I will mention your channel when I post my video. Thank you.
I thank you for this video. I have same shower valve. This is a very informative and detail with great advice. Please do not delete this video. It is helping lots of people. Thank you again.
I had exact same Valve, This video helped me a lot. They have three different parts # for the same valve, one before 97 and second between 97 to 2004 year and latest is valve made after 2004. The latest model cartridge just fits right on my older (1997 to 2004) model body.
Valve Stem Assymbly (971-250) is the front part. Balancing Cartridge (S74-291) is the back part. You also can just buy the newer part (974-042) which is one single assembly that replaces the two. I decided to go with the newer part as I had to replace the other ones twice in few years.
DAB 456 just to clarify, the Balancing Cartridge back part number is 974-291.
Thanks for your video. I could not find any name on my shower valve. Replaced heads on both showers. Went to HD and got the Unv - All in one - It fit like a glove. Could not wait for snail mail.
Great job
Thanks for the video!!! Thanks to you, I learned not only how to replace the parts but also of the life time warranty. Called PF and my parts will be here free of charge from PF in about a week. Everything they needed was on a small paper tab behind the handle which included the manufacture date.
Thank you, your video saved me from running from store to store. And from the need to change the actual valve.
Worked like a charm. Got a new cartridge sent to me from PP, still under warranty; initial installation was end of 2005.
You just unraveled the mystery of the leaking valve for us. Called the company and they're mailing me out the replacement parts free of charge. Thank for the helpful video!
I have same single handle shower valve, and the Pfister Pforever warranty was certainly good news to me! My shower has a slow leak (after 15 years!) and your tutorial made the repair very clear. Thanks!
Thank you so much for this video!!!! I went to Home Depot right after watching this video and had the job done within 15 min.
Great video! Thank you so much my good sir. I called a plumber cause my faucet had a small leak that would leak one drop every ten seconds or so. He walked in my bathroom looked at it without touching nothing, told me it would be $1200 to fix and that he would need to cut open the drywall in my room thats directly behind the shower in order to repair the leak. I told him I'd get another quote before I decide he then told me "cool, how do you wanna pay me the $100 fee for coming out and diagnosed it" long story short the bastard got me for my $100 but that's OK you my friend have saved me the $1200 blow my pocket was gonna take from that greedy punk. The Pfister shower valve cartridge replacement part is only $35 at Lowe's or you can get it from Amazon for $23. I'm gonna record myself fixing it, time myself then send it to that filthy plumber when I'm done! 🤗 Thank you!!!
Thank You! Thank You! Thank You! My pfister shower started leaking I contacted Price Pfister and they're sending out the parts today! Thanks for making it simple and easy. Keep up the Good Work!
Very informative video. I have the same model in my home and had to replace it in 2003. Started to leak recently. Fortunately for me, I had kept the old one and the packet it came in. That contained the part numbers I needed. I did learn from this video that there is a llifetime guarantee so I'm contacting Pfister about that. It is a good day when you learn something new. Thanks for creating this video. Well worth my time watching it.
You were the only one to show the 2 pieces of cartridge .everybody shows only one piece .thank yoy
Great video -Price Pfister has obsoleted those two parts and combine them into one unit (Pfister OX8). Spent hours running around to hardware stores looking for the washer only to give up and call Price Pfister who is sending them out at no charge. Just takes 7-14 days
thanks to this video i just successfully unclogged my shower valves that were only a year old and got all of my water pressure back all by myself!
Thank you for your very detailed how to repair video. This video saved me money and hours of fraustration I may have had to endure. My replacment part (new replacement part is now a single piece) that was sent to me free of charge by Price Pfister. Part came from Mira Loma to my south Orange County home in just 3 days. Awesome! Thanks again!
Thank you. Glad we could help
That was one of the best repair tutorials I've ever seen from a homeowner could have left The rubber ducky Part out but being from California I understand I grew up In Downey But thank you so much
Possibly the best UA-cam tutorial I've ever watched. Most are annoying and painful, yours was to the point and very clear. Thank you!
This really helped me. I was able to figure out the first parts. But I didn't understand that the second component just slid out. That allowed me to find the failing o-rings. Thank you!
Glad I found this video. Nearly all the videos are for Delta or Moen. Like you, I didn't even know I had a P-F because it doesn't say anything on it.
This was extremely helpful as he had all the same (identifying items) problems I had. Glad he took the last piece apart also. Now I know what I'm getting into and how to fix it. Thanks a bunch.
I had the same issue. This was a great tutorial! Thanks for the tip about calling PP for a free replacement! You should be the guy who produces all UA-cam Do-It-Yourself videos!
You saved my day, Mister. We weren't able to figure out how to get the first cartridge out, but your tutorial helped a lot. Thanks a lot!
My floor is soaked right now and so is my wall. Not sure if its my valve or the PEX so here goes my adventure. Thanks for the video.
Hey - thanks for taking the time to do this. I could not figure out the brand name of my shower and none of the big box stores had the parts that matched. I was getting ready to replace the whole thing when I say your video. Thank you!!
Man, you rock. You save me a trip to the hardware store and many hours of research. I called PFister and they are sending replacement kit for free. She stated that now it comes in one single piece unit. Thanks for sharing.
The model number is 974042 balancing cartridge.
Rod Pena Thanks Rod, I think many of us are pleasantly surprised at getting a new unit under the PF guarantee. So far they've not sent the PF police after me for alerting so many people of this great freeby.
+Rod Pena , thanks for the model number!!
LOTS of detail, thanks for sharing Noess and Pena. That's one crazy compression fit valve! I have the same one
Thank you for the model number. I’m calling PF now.
"The model number is 974042 balancing cartridge."
THANK YOU.
This is an excellent video ... Thank you! I really appreciate you taking the time to cut open the old parts. I will be replacing the same valve when my parts arrive in the next few days. Mine wasn't leaking but the handle became so stiff that I was concerned that something was going to break.
Thank you for taking the time out to make this. I needed the orientation of the outside valve assembly. Thanks. Now to add... done and no leaks.
You are welcome!
Masterfully done video. I don't share the same problem...I have hammer issues with my newly installed Price Pfister shower/tub valve. Just the same, I learned a lot. Thanks for the good work!
thanks for making the video I couldn't find a brand on mine either , thanks to your video I was not afraid to remove the plastic housing and found a replacement part at Home Depot!! Thank you.
Great video!!! I have never had to deal with plumbing or anything of the sort. Following the steps described in your video I could solve my problem like a pro!!!
Great video, everything was covered. The old valve is in two parts which threw me off when I first tried to repair the leaker. The video demonstrated how to take the second piece of the assembly out. The replacement valve is a single unit, part # 974042.
Thank you so much! Like you, this took me forever to find the brand, and then figure out how to replace it. Very grateful you made this. Great idea! I may do the same, so there will be at least 2 videos in the world! Thanks again!
Excellent video! Thank you for your efforts! I called Price Pfister and getting the parts under warranty. Will do the repair as following your video. You saved me a good chunk of change. Thank you!
Thank you for this video. I’ve found it very helpful and so I appreciate your effort to help others facing the same circumstance.
I had the same problem trying to identify just what brand I had for a faucet. Apparently I have I also have a Price Pfisher as well. Mine just started to leak and drive me crazy. Anyway, thanks for the video, like you said there is not much out there for the DIY people like us.
Very informative video. Following the instructions in a few minutes i fixed my shower problem. Thanks a lot for making this video sharing your experience on pfister parts replacement. Maurizio
This is an awesome video. I couldn't figure out what brand of valve this was. Thanks for doing all the leg work, it's much appreciated.
Very nicely done. I had same PF valvle and i could not find any video when did generic search. I was kind of gambling on the names and finally found your search!!. It really helped me. Thank you very mucn
Very good detailed pictorial! Alot better than the majority of actual videos posted on the same subject. I'm glad to know after watching your posting that Price Pfister actually has such a good warranty. I've always avoided buying their products after having leaking problems in the past and have mainly focused on using Delta or American Standard products because they seem to hold up better than their less expensive counterparts. Anyways, thanks for the fantastic in depth tutorial! Great job!
Thanks so much for taking the time to make this valuable video. It allowed me to identify my valve as a Price Pfister and I will be contacting them to get a new insert under the lifetime guarantee.
thank you! we had an issues where only the hot water was working. replacing the cartridge and perfect repair!
I am so thankful to you for saving me an unspeakable deal of time and frustration...
Thanks for sharing. My tub/shower valve is leaking - I just found out yesterday and I think I saved the floor/baseboard of my wall.
thanks for putting your video online. There is about 10 minutes of info. nobody needed at the beginning.
Literally exactly what mine looks like. Ran around all day trying to find an original replacement cartridge. Got home and the real nightmare started. On mine I pilled off that piece of black plastic, and there's a little cardboard disk back there with the Price Pfister logo and model number.
Thank you all for your evaluations. We're in the process of reformulating many of our early video's but we'll probably leave this one pretty much as-is. Just a few tweeks here and there.
excellent.... I've had an issue with these valves, 2, leaking through when the third tub was running??? Internal leaking, so I will change the valve. Like you, I had know idea what I was dealing with...make, model, where to go, etc., but this video pointed me to the right place. Thanks!
Great video. Went to Home Depot and Rona (Canadian chain) and both will give you the cartridge for free (Only Rona had it in stock). You have to ask a sales associate if you want the cartridge. Just told them it drips and they had no problem handing over the free replacement. Also the updated cartridge is one unit (instead of two).
Great video. I learned so much and am very grateful (although probably not as grateful as my wife is going to be once we nave a functioning hall bath again).
Thanks for posting that amazing video. It does help me a lot with my problem. I think many other viewers will appreciate it just like I do.
Wow thanks a million for posting this. I just got done replacing mine after watching your video. I was afraid to pull the valve out of the wall for fear I wouldn't find a replacement at Home Depot. The tip about the fire alarm shutoff was appreciated, I had my girlfriend watch the pressure while I turned the water off, no problems. Your video also showed me what the part looked like. I was actually able to find a one piece assy. at Home Depot for $24.00. No leaks, worked great. Thanks again!!!
Buddy you saved me I've been trying to get this thing done for 2wks thanks.
Thanks for the video, Called today for faulty shower valve and pfister is sending it out for free.
A life savior thank you , I had a leak that was driving me crazy and you save the day!!!! Thanks again..
Had the exact same shower faucet. Thanks for the video and detailed instruction. Very helpful!
Thanks so much for the detailed video. I'm contacting them tomorrow to see about getting the part
YOU ARE A GOD SENT!!!! THANK YOU FOR THE DETAIL AND TIME YOU PUT INTO THIS. This is exactly what I needed.!!!!!
Nice work. I don't have quite the same issue, but it was helpful to see the working parts as you disassembled them
Great info. I have same equipment. Called PP, they sent new valve. Plan to replace tomorrow.
This is great. Very clear, concise, easy to understand, very useful information. Thank you for your time in putting this together to help others. You are a star. May I ask if you have an idea of doing the same for an aqualisa shower?
Thank you for your detail and instructive video. I have an exact same type of valve and could not figure out the brand. I am going to order the replacement catridge and replace it by myself!
AWESOME video. I have the exact same set-up and you saved me hours of research and frustration! Thank you for posting!
Very well done!! Good tips and great detail. One of the best DYI videos I've seen in a long time.
Thanks for this. Incredible video. A plumber wanted to come in bust out my wall and put a delta in. Saved me some $$$
Thanks for putting this out. Saved me a ton of time!
Very helpful, I have the exact model, could you please let me know what are the part numbers for these particular parts? Thanks.
Excellent video, amazing easy explanation off how to...thank you sir
Thanks for this very informative video, I have the part in hand and I’m ready to proceed. Breaker, breaker I copy that, I’m 10-10.
Thank you for this. Well done. Very helpful.
Fantastic video. You must live in Ladera, right? Same here... everything looks the same. From the shower valve, to the water shut off and fire system in the garage. Mine just went south too but it lasted 17 years. Guess I'm pretty lucky. I'll be calling PF today! Thank you!
Talega
@@otd80 Talega was my second guess 🙂
Thanks for posting. I have the same model and am not at all handy. I saved on a plumber by following. Thanks!
Great video and the warranty recommendation was spot on. Thank you!
The new cartridges are one piece and as low as $22.00 for OEM on Amazon. Just replaced mine yesterday after bringing back the "recommended" valve part #1 which didn't fix the problem because part #2, the black piece with 2 holes was the problem. Just buy the one piece. It's cheaper overall and fit's perfectly.
Thank you for this video. Your info is really helpful and well put together!
Thanks for a great video, I really appreciate your having taken the time to produce a very detailed explanation, will be very helpful! Also tip about the guarantee was great.
I love your video, it is just so clearly state all details.
thanks for the video, fixed mine with no problems.
Thanks for the helpful video. Fixed my issue completely.
Thank you for very useful information!
I've been a little surprised at the number of people interested in this subject. As far as pipes doing a "water hammer," I would suggest checking the anti-hammer tank. It's usually located close to the water heater. In older houses lacking the tank there should be a closed stand pipe that performs the same function. Be advised...I am not a plumber and have never even played one on TV. I just had the advantage of growing up poor...one learns to fix stuff or to do without.
Thanks for all of the great information! I actually just got off the phone with Kathleen at Price Pfister - she not only id-ed the part but will send me a new replacement - free. They have a great warranty there - knowing that I will buy Price Pfister parts from now on (I thought customer service was dead nowadays - but Kathleen proved that wrong).
Again - thanks for posting this great & informative video! You saved me a bundle of cash! and frustration.
PS - are you going to do any more of these videos? They are great.
Thanks for explaining this so thoroughly. I''m sure we just saved ourselves at least $150+ on a plumbler.
I have a Delta but same issues and assembly pretty much the same. Thank you
thanks so much. couldn't fine any info on this. i have this problem and same set up. thanks
Glad it helped
Perfect! thanks for the video and thanks for telling the make of the manufacture. I had same set as you.