How to Fix a Chipped Sink

Magic Porcelain Chip Fix quickly and easily repairs chips, cracks, and scratches on porcelain, ceramic, and enamel surfaces including sinks, tubs, and tile.
Find where to buy: magicamerican.com/porcelain-c...
Written Directions:
1. Surface Preparation: Sand chip to smooth edges, clean surface with an abrasive cleaner and scrubbing pad to ensure proper adhesion. Rinse thoroughly, dry with paper towel, and allow to air dry for one hour.
2. Epoxy Preparation: Empty contents of both vials of product into mixing tray (i.e. plastic packaging containing product). Mix thoroughly for 1 minute. Pour half of the mixture into a second container and store in the freezer for later use. Let other half stand for 30 minutes at room temperature.
3. Application: Use included brush to dab a light coat into the chip. Wipe away runs with a damp paper towel. Wait 45 minutes. Clean brush with lacquer thinner. Apply a second coat. Allow surface to dry for 24 hours before using. If the temperature is below 70°F (21°C) or humidity is above 50%, allow more drying time up to 72 hours.
For Best Results: Apply multiple light coats. If more coats are needed, remove stored mixture from the freezer (let stand for 10 minutes at room temperature prior to applying).
Working Time: 1 hour at room temperature. 6 hours in the freezer.
Cleaning: Wait 5 days before cleaning surface. Use only non-abrasive cleaners.

[@sportster88]

It looks like you have a choice of the colors white, white or white.

[@emeldy2687]

What was the lacquer thinner and ajax for? Do we absolutely need that to clean the chipped area after sanding? Or can we just use dish soap or something like that?

[@MagicProducts]

Best results are achieved when directions are followed as per the label.

[@joerevere5558]

The video says to wait for 45 minutes after applying the first coat to apply the second coat. What keeps the epoxy from drying out in the plastic container during this wait time?

[@MagicProducts]

This wait time will not allow the product to harden. You can put a small piece of plastic wrap over the mixture if you would like to.

[@christelschroedter7857]

The tiny brush doesn’t get the product out of the container ! All together the product didn’t work for me ! $20.- down the drain !

[@MagicProducts]

We are sorry to hear that you are having issues with our product. You can contact us at [e-mail] or at #855-364-8137.