Build your own effect pedal Tube Type Overdrive - Designing the PCB

I think the broken Tube Works Real Tube Overdrive may be beyond repair. Let's just recreate the PCB.
I've always wanted one of these and I'm really excited to get it on my pedal board.
Consider supporting this channel on patreon: / homespuneffects
**AMAZON ASSOCIATE LINKS**
Equipment I use:
Hakko FX888D: amzn.to/39wDZC6
Kester Solder (63/37 SN/PB): amzn.to/2SG27fm
Chemtronics Desoldering Braid: amzn.to/2SIdDqO
Hakko Micro Cutter: amzn.to/36eVJ2u
Isopropyl Alcohol 99.9% (IPA): amzn.to/2ZGRN8d
Alcohol Dispenser: amzn.to/2MMF278
Cleaning swabs: amzn.to/2F9xrv4
Siglent Technologies Oscilloscope: amzn.to/2Fb1pi8
Startech Antistatic mat: amzn.to/2rHiUn9

[@RR1976]

Issue that I had with my Blue Tube... they have these pots that have legs that come off the PCB at a 90 degree, and are pressed against the pcb. One of these bare legs was pressed onto the trace that belongs to a different part of the circuit. I put a plastic shimmy between that bare leg and the trace where the masking cracked from that leg being pressed on it after all these years.
I would wager that a lot of people have tried troubleshooting their pedal and never figured it out. I don't know what revision this pedal is, but everyone who has it I can assure you that there's a pot leg that is pressed against a trace that's going to give you problems down the road once that masking cracks.

[@dingeralan8911]

Like a Wizard Boss ! I watch not because I think I could ever do it , I watch in amazement at how you click n travel through

[@HomespunEffects]

I appreciate you watching. If you ever want to get into soldering up a few things, let me know.

[@michaelscott9995]

Awesome video.. So Interesting. With all the tweed amp kits out there I wonder if it would be possible for a tube pedal kit?

[@HomespunEffects]

I know MadBean is working on one.
Thanks for watching. 😃👍