Yoooo nice video the car looks awesome! I would’ve like the color to be white but that’s just personal preference. Hope you continue to make such good videos!
Amazing work. Is there a program that automatically adds connector points to builds when you need to break them apart to build? It would make getting it aligned in glue up easier.
Hi sir ill get my 3d printer and i want to do things like this. I found 2 models ender 3 v3 ke and s1 plus which one should i prefer? I mean will 22x22 build plate be enough?
Looks really cool but you need a better chassis just look at that wheel wobble it's the first thing that the viewer will notice but the body it's self looks awesome great job
As long as you print with walls, high infill, and dont completey toast your car, you should be fine. The gears don't break, tho I have had them melt 3-4 times when in PLA. In PETG, no problems yet
I dont have a printer but i wanted to know how much it ll cost me if i go to a private printer, i know its per/ hours. Is it worthy or just for 3d printer owner only ?
I would like to know what type of plastic you used for the headlights. I experimented with few and did not find the right one. By the way, video was cool.
@@MrGoodcat1 i did adapt the chassis, the length is fine but the width is an issue...the wheels is sticking out on the sides, the issue is the offset on the rims
Well hellow my brother if dare the creat a 3d printer rc car of a car charater of a cartoon 'Watch car' in it there is a car named ' Blue Thunder please can you creat it's video
In this video you will see how to build your own RC CAR!
can we have file link
@@Lakshyarautela link is in video description but not for free
Where can i find the Electronics?
Not just the Car, your cinematography is a Serious Talent
Thank you🙌
Learn something new everyday thank you Mr. GoodCat.
I love the timelapses for the printing shots! Have you considered making interiors too?
Thanks. No, it won't fit cause inside there are electric motors batteries and etc...
Did you pause the print on each layer to get that Timelapse? How did you get the printer head out the way
Your work is amazing! Well done!
Very nice model. Video editing is also great. Luv it 😍
cinematography feels so real
Thank you
just a little tip from my side, you should try resin printers or printing at a lower layer height for less post preparation like sanding.
Nice work. But the layers are horribly visible and look not each same. Something seems to be wrong in your settings.
No, it is smooth. Light source it on top and that's why it seems like that, only spoiler part had some artifacts
Well done!
Thank you!
Is there a coupon I could use? $16 seems a little cheap for the level of detail presented in the model.
Yoooo nice video the car looks awesome! I would’ve like the color to be white but that’s just personal preference. Hope you continue to make such good videos!
did you use pla or petg ???you mentioned only tpu for the tyres......nice video
Body is made with PLA + and tires are TPU
@@MrGoodcat1 is it durable? What if the car run in a tropical place?
@@DnKcorner it is durable if there won't be any contacts (crash) on walls or ect...
Amazing work. Is there a program that automatically adds connector points to builds when you need to break them apart to build? It would make getting it aligned in glue up easier.
Thank you. There is one program, materialise magics but it's not free
cool car! nice video! what is your 3d Printer?
Thank you. Snapmaker 2.0 A350
Amazing! What 3D printer did you use?
Thank you. Snapmaker 2.0 A350
U should tottaly make a Ferrari 458 italia next!
The edition is very good and action
Thank you🙏
Hi sir ill get my 3d printer and i want to do things like this. I found 2 models ender 3 v3 ke and s1 plus which one should i prefer? I mean will 22x22 build plate be enough?
Hello. Yes, 22x22 is enough
@@MrGoodcat1 ok tysm sir
How wide are the wheels? I would like to buy the tires instead.
This is insanely cool!!
Quality content
How well does it hold up structurally?
not as metal but, it's pretty good enough
What modelling software did you use for this?
Houdini
How did you model it??
Looks really cool but you need a better chassis just look at that wheel wobble it's the first thing that the viewer will notice but the body it's self looks awesome great job
Yes you're right, i have bought buggy rc and hope i'll use its chassis in future
BMW z4 gt3 next?? But u already made a bmw so maybe a mercedes amg gt3 next?
How long did you print the front head?
Don't remember exactly but whole model took roughly 60 hours
What is the name of the material you use to make the headlights?
I'm not sure, but it is same as transparent containers for food and etc
Beautiful video!
Great Job
what glue do you use?
when is the project one coming?
Thanks. I'm using super glue. Project one will be soon, at the moment i'm creating a new adaptable chassis for it
Wont the motor gears get worn off gradually? Can you provide a link for alternate metal gears as replacement?
As long as you print with walls, high infill, and dont completey toast your car, you should be fine. The gears don't break, tho I have had them melt 3-4 times when in PLA. In PETG, no problems yet
My question about electronics which motor T did you use? I want 12T motor but i dont know how its driving and which battery did you use 2s or 3s?
Hello. I was using 540 motor with 2S battery
@@MrGoodcat1 Thanks
super cool! What filament did you use to print the body? PLA or PETG?
PLA+
Where can I get the measurements for this. I have an Engineering project to finish 😭😭
It is 1/10th scale model of a real car
Very Impressive
Thank you!
Good job
I dont have a printer but i wanted to know how much it ll cost me if i go to a private printer, i know its per/ hours. Is it worthy or just for 3d printer owner only ?
I have no idea. It was printing near 72 hours or so
@MrGoodcat1 please make one Koenigsegg CC first prototype, McLarenF1 LM orange and Detomaso P1
At the moment i'm doing Mercedes AMG: Project One. Maybe I'll do it in future
Which 3d printer do you use? As even I need one to print turbines with high efficiency.
Snapmaker 2.0 A350
Nice brother 👍👍👍👍👍
Thanks ✌️
I would like to know what type of plastic you used for the headlights. I experimented with few and did not find the right one. By the way, video was cool.
Thank you! I used transparent PVC Film for headlights
What slicing program did you use?
Cura
Printed it, wheels fitted to the axles, wheels sticking out on the sides of the body, almost 10mm each side
You should modify your chassis to fit properly. At the moment i'm doing new adaptable chassis for my new project
@@MrGoodcat1 i did adapt the chassis, the length is fine but the width is an issue...the wheels is sticking out on the sides, the issue is the offset on the rims
@@johanstrauss81 Should scale down some axis parts. For example something like this: mega.nz/file/MBlDAa5D#Vjnxtne-YotqrSBCkTP7j5Qm5wOAP6pyyvO9mspbg3A
@@MrGoodcat1 thanks. I will give it a try
@@johanstrauss81 may i ask which parts you adjust to make the chasis fit the wheel base?
What is the average weight of all 3d printed parts
I'm not sure, maybe less than half kg
How you done to create the file ?
Houdini software
Very nice
How many grams of plastic consumed in the car body and tires?
Don't remember, but less than 1kg
Can you upload a tutorial for car modeling?
i don't do modeling tutorials but there are lots of them here on youtube
@@MrGoodcat1 I know but I need to know how you can make these pieces separately 😭
Did you use any scaling when printing body? I see it has 245mm wheelbase and chassis is adjustable from 258mm to 288mm so in theory it should not fit
I haven't scaled anything. You have to adjust chassis and it will fit without any problem
any 911 turbo S's?
Which printer do you use?
Snapmaker 2.0 a350
please consider making Hyundai N Vision 74
Maybe in future
Mr good cat it is my humble request to make the modified cars like zyphers designs makes pls
👏👏👏👏👏
Whats the wheelbase? Looks nice!
It's 245mm
Wooooooo
how much is the total cost ?
If you are asking only printing, than near 1kg of PLA filament
@@MrGoodcat1 how much with the electronics too?
@@MTBValdan near 100$
@@MrGoodcat1 that's kinda pricey 😅, thank you for answering my question tho
f1 car with 3d printed suspension parts
BMW m135i f40?
If I had the means to have a printer like this I would make it to sell a lot of cars and other things too😢
set your printer. low quality . use Alchlade2 for paint and use coat shiny
Where does the electrictronics gone
It's inside)
@@MrGoodcat1 that i know but it's not the video
can I have the file plss
download link is in description, but not for free
Well hellow my brother if dare the creat a 3d printer rc car of a car charater of a cartoon 'Watch car' in it there is a car named ' Blue Thunder please can you creat it's video
should to polish all surface for perfect car
Quien compro el archivo
Bet the crashes are spectacular
haven't tried yet😀
make a randrover 2023
Ferrari F45 build
😅
Bal banaiso from Rifat
𝐩яⓞ𝓂𝓞Ş𝐦
How do you get the supports to remove so easily?
Well there are lots of options in support tab and after lots of tweaking i got nice results. i also use support interface