IRFZXXn is different of IRLZXXn IRF is not logic mosfet, but IRL is. IRF has big drop voltage (until 1 volt). You need to power it more. When you check the voltage, it only has about 3.17v with high ampere consumption. Then try to use only 1K resistor (not 10k). But the motor and cables will be hotter when the motor starts spinning
@@techfun5656 It is easy to see if a mosfet is proper for this project. "IRL" (not IRF) where "L" is "logic-level" - where "F" is "fake" LOL 🤣🤣🤣 (if you insist to use IRF, try to use in4007 not in 5819 with 1K resistor) But the most important thing is to see the detail in its datasheet.
I guess 720 dc motor must need gear and you made it alone. That's so great, bro! 💯❤❤❤
thank you
I love diy fpv 🎉🎉🎉
me too 🥳🥳🥳
make a big one, please
Mantabs bro. akhirnya bis terbang juga 🎉🎉🎉
Alhamdulillah setelah petualangan 3 tahunan aahhahaha
Wonderful
thanks, brother
First sight, I thought your video was fake but then 🤣🤣🤣 sorry, your video is so useful brother. Thanks.
What I share in my channel is all real, brother. Dony worry
That was great!
Tutorial pake bhs indo dong 😂😂😂❤
ua-cam.com/video/qnTQcdT5c_I/v-deo.html
Can you tell me why I cannot use irfz44n mosfet because other UA-camr have made similar drone using that mosfit
IRFZXXn is different of IRLZXXn
IRF is not logic mosfet, but IRL is. IRF has big drop voltage (until 1 volt). You need to power it more. When you check the voltage, it only has about 3.17v with high ampere consumption. Then try to use only 1K resistor (not 10k). But the motor and cables will be hotter when the motor starts spinning
@@ArduJimmy if I use irf540n mosfet then
@@techfun5656 It is easy to see if a mosfet is proper for this project. "IRL" (not IRF) where "L" is "logic-level" - where "F" is "fake" LOL 🤣🤣🤣 (if you insist to use IRF, try to use in4007 not in 5819 with 1K resistor)
But the most important thing is to see the detail in its datasheet.
@@ArduJimmy i can't find irl mosfets here and what is the difference if I use irf mosfet
@@ArduJimmycan you see the datasheet of irf540n and tell if I can use it
Will the drone fly if i use 8520 motors with 25gram battery and irlz44n mosfet
The thrust of each motor is 45 to 50 grams
25grams is too heavy for this project. I'm afraid it won't be able to fly. You need to reduce other components
@@ArduJimmy which components can i reduce and i have 3d printed the frame
@@techfun5656 IRLz44N to si2302, use promini with no header pin. Use soldering instead of jumple cable. Change propeller from 65mm-1mm to 75mm-1mm.
@@ArduJimmy I am doing that only except the 75 mm prop because in India ee don't get that and sum of the thrust of 4 motors is 190 grams