This is a stock ecu and a stock feature. But from factory it has pretty weird params - limit 5500 rpm below 20 degrees. I used MazdaEdit software to change these params to 4000rpm and 60 degrees.
@@rb338-spb yes I've seen....I have an RX8 too.You are the only person that I know that have a new engine and you know how take a care ....Just curious about number after 17000 km...I'm in way to replace mine after 100000km... Due to clutch problem ( pressure plate ) and I have take out engine ( with 6.3-6.5 bar ) . thanks in advice to reply.
In my case - its not a problem, its a feature! Warmup rev limiter works only until coolant warms up to 60 degrees. And after 60 degrees - it works as usual. If your car do not revs over 3000rpm at all - check dtc first - maybe its a problem with metering oil pump.
The r3 and s2s will have an extra light to let you know how far u can rev while warming up
I'm also a rx-8 driver. Is this a ecu? Or what? Can you send link?
This is a stock ecu and a stock feature. But from factory it has pretty weird params - limit 5500 rpm below 20 degrees. I used MazdaEdit software to change these params to 4000rpm and 60 degrees.
@@rb338-spb Did you know compression number of your engine?
@@dgmdgm7271 it was a brand new engine 17k km ago)
@@rb338-spb yes I've seen....I have an RX8 too.You are the only person that I know that have a new engine and you know how take a care ....Just curious about number after 17000 km...I'm in way to replace mine after 100000km... Due to clutch problem ( pressure plate ) and I have take out engine ( with 6.3-6.5 bar ) . thanks in advice to reply.
@@dgmdgm7271 bit late here but if you have the money to rebuild the motor go for it. Better it be in the shop a bit longer than strand you
My 07 rx-8 has no rev limiter at all, I can redline it soon at starts up, is something wrong with it? It’s the sport trim if that matters
Factory settings - 5500rpm limit if coolant below 20 degrees celsius.
Factory settings for this feature are kinda weird.
how did you get it to redline at 4k? i want to make mine do that
It can be done via MazdaEdit - there are two special parameters warmup rev limiter temp & rpm
How much for limiter unit, boss?
There is no limiter unit - this a stock ecu feature
I have the. Same. Problem at 3 rpm what will I do with it. Now. Any advise. 😢
In my case - its not a problem, its a feature! Warmup rev limiter works only until coolant warms up to 60 degrees. And after 60 degrees - it works as usual.
If your car do not revs over 3000rpm at all - check dtc first - maybe its a problem with metering oil pump.
@Bolang no. Cold limiter. Stops stupid people from revving the car when it's cold.
Yeah that's called a soft limiter. Lower limit to prevent damage. It's called a soft limiter because you can go past it in normal operation
Howd you get gauge temp on your phone ?
Thats pretty easy - any obd2 bluetooth adapter and any android app for working with obd2. In my case - OBDLink MX as adapter and TorquePro as app