Does this work for a 2018 Q7 with the 3.0t? I have one in my Ran 1500 semi and even though its port injection there is a substantial amount fo blow by picked up by the can and it looks nasty. Might not be a big deal there but am thinking on the Audi its important.
The can seems a bit smaller than the cans I usually see. It's this sufficient for tune and modified engines as well? I'm more concerned with the rate of flow going through the can.
Wait.....so you're just going to drain the oil from the PCV system down onto the under shield?? Why wouldn't you drain it back to the engine or just leave the drain plug in the can and check if it's full every so often and dump the excess oil back into the engine?
There is a valve at the end of this hose, with how tight the engine bay is removing the catch entirely every time would be too much work. We found the simplest solution to be draining it from the bottom. The drain valve is not required if you prefer to remove the can every time. Often times this oil is pretty nasty looking and not something you would want going back into the engine.
You wouldn't want to empty that oil back in to the engine. A lower drain like this one is perfect as you can just open it up and drain it at every service (which for my tuned/modded B9 S5 is every 4-5000 miles) since you're already removing the under tray for the oil sump drain.
Is it possible to buy the fitting for audi hoses. I have from my old car the mishimoto Catch can and want install to my New a6 c8 55tfsi. But i need the fittings
The warranty is something your specific dealer provides and voiding would be up to them on this. We would suggest reaching out to your dealer about this directly.
Unfortunately we do not get the RS4 here in the US so we have not been able to confirm this. But the engines will be slightly different that could cause issues.
@@mishimoto Ah forgot about the RS4 problem in the US, maybe you have the chance to test it on a RS5, the bays should be identical. Anyway love your dedication to work and quality, spot on guys 👍🏻👌🏻
Does this work for a 2018 Q7 with the 3.0t? I have one in my Ran 1500 semi and even though its port injection there is a substantial amount fo blow by picked up by the can and it looks nasty. Might not be a big deal there but am thinking on the Audi its important.
While this is not a direct fit for the Q7, it's possible you could use the kit or a universal option and fit it to the vehicle.
The can seems a bit smaller than the cans I usually see. It's this sufficient for tune and modified engines as well? I'm more concerned with the rate of flow going through the can.
Yep! No issues.
Does anybody know if EURO specs S4 B9 (tfsi) does have port injection?
Wait.....so you're just going to drain the oil from the PCV system down onto the under shield?? Why wouldn't you drain it back to the engine or just leave the drain plug in the can and check if it's full every so often and dump the excess oil back into the engine?
There is a valve at the end of this hose, with how tight the engine bay is removing the catch entirely every time would be too much work. We found the simplest solution to be draining it from the bottom. The drain valve is not required if you prefer to remove the can every time. Often times this oil is pretty nasty looking and not something you would want going back into the engine.
You wouldn't want to empty that oil back in to the engine. A lower drain like this one is perfect as you can just open it up and drain it at every service (which for my tuned/modded B9 S5 is every 4-5000 miles) since you're already removing the under tray for the oil sump drain.
@@twentieth_r How much does it collect between 5k services?
Is it possible to buy the fitting for audi hoses.
I have from my old car the mishimoto Catch can and want install to my New a6 c8 55tfsi.
But i need the fittings
Feel free to send an email to support@mishimoto.com and our team will be happy to look into this for you.
will this fit b9 Audi sq5?
While the engines are similar mounting the can will not be the same and would result in the hoses not lining up correctly
Is there a set up for models of the A8?
Not at this time. Sorry!
will that void the warranty?
The warranty is something your specific dealer provides and voiding would be up to them on this. We would suggest reaching out to your dealer about this directly.
Is this suitable for the audi s5 v8 engine?
This has only been tested on the 3.0 TFSI engine.
I need one for my 2019 Volvo s60r t6
Also for RS4 B9?
Unfortunately we do not get the RS4 here in the US so we have not been able to confirm this. But the engines will be slightly different that could cause issues.
@@mishimoto Ah forgot about the RS4 problem in the US, maybe you have the chance to test it on a RS5, the bays should be identical. Anyway love your dedication to work and quality, spot on guys 👍🏻👌🏻
Will this fit with 2020 Audi SQ5?Since the engine is the same
We have not tested this on the SQ5. Sorry!
Does this fit the rs5b9??
This is not advertised to fit the RS5. Sorry!
@@mishimoto will you guys be making one 🥲
We do not have one planned. You are welcome to email us at support@mishimoto.com with any product suggestions!
Got a 2019 RS5 and would love to see one available for it...
I adapted this kit to fit on my RS5 and I’ve had 0 problems. Catches oil and keeps the intake system clean. I’m also running the TTE720 turbochargers.