Most Popular Modifications For Audi TT

Поділитися
Вставка
  • Опубліковано 29 лис 2024

КОМЕНТАРІ • 92

  • @user-rp9hs3dp5u
    @user-rp9hs3dp5u 4 роки тому +3

    Clear and accurate information for the 225 Quattro Dom, totally agree on poly bush upgrade that a suspension strip down is not a driveway jack up job. 👍

  • @bunter6
    @bunter6 4 роки тому +3

    Great video, agree with the hubcentric spacers and I would go 1 further and say get ones that bolt to the hub then you bolt the wheels to the spacer if your going bigger than 10mm. Your putting a lot of shearing pressure on the extended wheel bolts if your putting 20mm longer bolts on, defo worth an extra tenner for ones that bolt to the hubs.

    • @TheParrottBros
      @TheParrottBros  4 роки тому +1

      Great shout that, I’m going to be doing a video on spacers at some point I’ll be sure to add that

    • @TheNorville2
      @TheNorville2 4 роки тому +1

      Or instead of using wheel bolts change to studs that go into the hub, makes it so much easier when putting wheels back on.

  • @AndreLucful
    @AndreLucful 4 роки тому +5

    Very clear and good video. Thank you for the advice! Would love to hear a big power setup video

    • @TheParrottBros
      @TheParrottBros  4 роки тому +1

      Thanks for the comment, I will start doing some research and see what I can do

  • @stevefoley-v5v
    @stevefoley-v5v 5 місяців тому

    Hi dom, got a question, I’m trying too remove my head on my bam engine tt to replace head gasket, 2 problems so far, 2 bolts on turbo manifold have shredded so can’t get a grip on them with the e14 torx, not a problem I thought I’ll leave it attached too the manifold and pull the whole lot with the head, got down pipe bolts off, but heater when trying to remove turbo support bracket, the bolt started Coming out nice then locked up, basically the head has snapped, so now thinking pray bar to try and rip it off the turbo, what are your thoughts on getting it off so I can finally pull the head, proper headache this car. Cheers

  • @gplusgplus2286
    @gplusgplus2286 4 роки тому +3

    Forget hybrid crap for 1200 when you can get a brand new Garrett G25 550 for a little extra. But you're looking at around 10k if starting from OEM for a stage 3 proper forged setup for 400+bhp. Stage 2 is the most cash efficient way for these engines, as you said TIP, exhaust, FMIC, injectors and map, up to 300bhp

    • @TheParrottBros
      @TheParrottBros  4 роки тому +4

      The benefits of a hybrid is the fact that you don’t need to change the manifold and downpipe, which again is more money. But that being said like you say the figures start stacking up high when you want to pass the stage 2 region figures wise

  • @NordicAdvRider
    @NordicAdvRider 4 роки тому +7

    An awesome video as usual. Thanks for taking your time to go through these options 👍

    • @TheParrottBros
      @TheParrottBros  4 роки тому +2

      Why thank you Mr Wang! It’s my pleasure. I’m a sucker for research so always nice to share my findings with others 👍🏻

    • @nixonatlas1371
      @nixonatlas1371 3 роки тому

      i guess im asking randomly but does anyone know a method to log back into an Instagram account?
      I somehow lost my login password. I appreciate any assistance you can give me

    • @kyloramon4970
      @kyloramon4970 3 роки тому

      @Nixon Atlas instablaster ;)

    • @nixonatlas1371
      @nixonatlas1371 3 роки тому

      @Kylo Ramon thanks so much for your reply. I got to the site on google and Im in the hacking process now.
      I see it takes quite some time so I will reply here later when my account password hopefully is recovered.

    • @nixonatlas1371
      @nixonatlas1371 3 роки тому

      @Kylo Ramon It did the trick and I actually got access to my account again. Im so happy:D
      Thank you so much you saved my account!

  • @kyledavies5284
    @kyledavies5284 4 роки тому +2

    Really would love you to do another video going into depth about big power builds !!!!

    • @TheParrottBros
      @TheParrottBros  4 роки тому

      There is one planned for early next year 👌🏻

  • @damer651
    @damer651 10 місяців тому

    I just bought a 225 facelift model, thanks for great info on mods.

    • @TheParrottBros
      @TheParrottBros  10 місяців тому

      Its my pleasure, so tell me a little more about the car, colour, condition, future plans? dom

    • @damer651
      @damer651 10 місяців тому

      @@TheParrottBros thanks it's Avus silver, very clean condition, future plans are that i'd likely to take it up to the 285hp as per your description, with upgraded brakes, on exhaust system I'll probably go for Miltek decat option.

    • @TheParrottBros
      @TheParrottBros  10 місяців тому

      Lovely understated colour that ! awesome look forward to hearing more about it in the future, any questions you know where to find me @@damer651

    • @damer651
      @damer651 10 місяців тому

      @@TheParrottBros Thanks I'll let you know of my progress.

  • @homebrewinstrumentals7700
    @homebrewinstrumentals7700 4 роки тому +1

    There is a bloke on ebay selling ECU's with a stage 1 map for £130. I know its questionable to do this but I needed a new ECU anyway and im loving the extra power - so far no dramas!
    Edit: make sure you part number match!

    • @TheParrottBros
      @TheParrottBros  4 роки тому

      Cheap fix with added power. That’s alright then :)

  • @stevelodge6506
    @stevelodge6506 4 роки тому +1

    I have the same colour tt225 as you....thinking of getting a stage 2 remap for her 👍

    • @TheParrottBros
      @TheParrottBros  4 роки тому

      Fastest colour 😉
      Have you changed the downpipe, fitted a fmic & put a tip on? Best figures will be with above mods 👌🏻

    • @stevelodge6506
      @stevelodge6506 4 роки тому

      @@TheParrottBros yes 3" downpipe,sports cat, milltek catback system,forge dv, ram air filter, oil catch can, still running standard turbo and intercoolers

    • @TheParrottBros
      @TheParrottBros  4 роки тому +1

      Steve Lodge ooo baby 😍😍

  • @everstefan7402
    @everstefan7402 4 роки тому +1

    Having the engine forged... what the best turbo upgrade??

    • @gplusgplus2286
      @gplusgplus2286 4 роки тому +2

      Garrett G25 550, forget hybrid crap. Theres also a 660 if you fancy lol

    • @TheParrottBros
      @TheParrottBros  4 роки тому +1

      It all depends what your after, big boost and lag or low down spool. The G25 is a brilliant option. Search UA-cam for team prawn racing and have a look at his s3 that runs a Garrett g25

  • @irishredcrypto
    @irishredcrypto 4 роки тому +1

    Great video . I have just got a 199 tt sline 225 and find your videos very helpful . My car is at 130,000 miles would a stage one remap start speeding up problems on the way or is it safe enough ?

    • @TheParrottBros
      @TheParrottBros  4 роки тому

      Providing the cars service and timing belt is up to date a stage 1 shouldn’t cause you any issues. You may find if you have weak boost pipes they may split as you will increase the boost pressure and things like that but that’s all what if’s. It’s more fun that’s for sure

  • @Marvolous718
    @Marvolous718 4 роки тому +1

    What company you recommend for re mapping

    • @TheParrottBros
      @TheParrottBros  4 роки тому

      It depends where your based in the country, the best for south west are badger 5, midlands is cj mechanical

  • @dimitrist3561
    @dimitrist3561 4 роки тому +1

    Anyone knows the BCS exhaust for the TT? I've been trying to find something that doesn't sound like a fart box and this one seems to fit the bill. The system includes a 3'' downpipe and 200 cell sports cat. It's got an actuator that makes the car stock-like at low rpm and it opens up the harder you push it.

    • @TheParrottBros
      @TheParrottBros  4 роки тому +1

      That sounds good. I’ve not heard one before that I know of. I’ll see what I can find when lockdown is over

    • @dimitrist3561
      @dimitrist3561 4 роки тому

      @@TheParrottBros Thank you for taking the time to reply to comments! It's around 1500 euros where I live and that's just the exhaust system, no work done. I've read only good things about it so far, everyone says it's a quality product. By the way, I've installed the forge blowoff valve and the ramair filter. I didn't expect it to be so loud! You can hear the car breathing like it's alive.

    • @TheParrottBros
      @TheParrottBros  4 роки тому +1

      That’s good to know, yeah it’s funny some people think the induction noise is too much haha. If you fit a turbo intake pipe it makes it even louder too

  • @farnaboy
    @farnaboy 4 роки тому

    Any chance of a video discussing Haldex options? The HPA Touchmotion system looks good but is the Haldex Competition Controller a better alternative, if you can get one? Is the PowerTrack insert worth considering?

    • @TheParrottBros
      @TheParrottBros  4 роки тому +1

      I’ll do some research and see what I can do :)

  • @neilrigden8991
    @neilrigden8991 4 роки тому +1

    Really enjoyed the info in this video. When is the next TT meet.

    • @TheParrottBros
      @TheParrottBros  4 роки тому +1

      Thanks buddy, hoping to do one in midlands area 19th sept

    • @neilrigden8991
      @neilrigden8991 4 роки тому +1

      The Parrott Bro’s cool look forward to your post as to where and when

  • @kanetheriot3204
    @kanetheriot3204 4 роки тому

    Can I map without changing the back half of my exhaust?
    From decat back I'm stock. From decat forward it is 3 inches.

    • @TheParrottBros
      @TheParrottBros  4 роки тому +1

      Yes that’s absolutely fine, a lot of people do that

  • @AngloSaxon1
    @AngloSaxon1 4 роки тому +1

    Great Video, great information.

  • @steambuns2283
    @steambuns2283 4 роки тому

    hello. about the rods you're talking about? is it the rod inside the engine? or the tie rods under the car? sorry new to modding cars

    • @TheParrottBros
      @TheParrottBros  4 роки тому +1

      If your looking to get more power the rods are what push the pistons up and down, rods short for con rods :)

    • @steambuns2283
      @steambuns2283 4 роки тому

      thankyou :D

  • @analogrich
    @analogrich 4 роки тому

    thanks for the video.. I have a question regarding exhausts.. I'm going for the Baf Motorsport down pipe do I also need the miltek back box? would that be the best combo for a bam 225?

    • @TheParrottBros
      @TheParrottBros  4 роки тому

      I would email Chris and make sure it mates up to the miltek, I’m sure it will. The miltek does produce a lovely sound. Search UA-cam for miltek cat back noise

    • @analogrich
      @analogrich 4 роки тому +1

      @@TheParrottBros will do, thank you.

  • @nickbogdanos2
    @nickbogdanos2 4 роки тому

    Hi Dominique, thank you for the video and keep up the good work.

  • @Andrew-ik2uk
    @Andrew-ik2uk 4 роки тому

    Any upgrades for V6 s-tronic?

    • @TheParrottBros
      @TheParrottBros  4 роки тому

      You know what it’s something I know little about, leave it with me and I’ll see what I can find out

  • @tomcadden9048
    @tomcadden9048 4 роки тому

    Awesome vid! any suggestions on 15mm spacers?

  • @luisrivas424
    @luisrivas424 4 роки тому +1

    We need big power mods!!!!

  • @dougpt10
    @dougpt10 4 роки тому +1

    Entertaining mate!!

  • @trapper69420
    @trapper69420 4 роки тому

    Is this only for the Quattro or the 2wd as well?

    • @TheParrottBros
      @TheParrottBros  4 роки тому

      Exhausts and certainly other things like rear anti roll bars may differ on 2wd vs Quattro setups. In the uk they are more Quattros than 2wd models.

  • @blakkno666
    @blakkno666 4 роки тому

    Surely a 'decat' exhaust won't get through an mot?
    I have a milltech rear box, sounds awesome, really nice bass rumble as opposed to to the 'waspy' crappy sound most exhausts seem to have

    • @TheParrottBros
      @TheParrottBros  4 роки тому +1

      Thats Correct nick, a lot of people run decats and then swap in a cat for mot or find a way around it. The miltek is a lovely sounding system and very popular in the 1.8t world. Some others can be raspy I’ll try and film some different ones next time we all get to meet up

  • @TheNorville2
    @TheNorville2 4 роки тому +1

    Another brilliant video..I realised I have most of the upgrades already.just getting a stage 2 done now.. only thing left is do I need coilovers?

    • @TheParrottBros
      @TheParrottBros  4 роки тому

      Neville Carpenter hey buddy, thanks for the nice comment 👍🏻. Coilovers is all dependant on what you plan to do with it. I’m just going to fit nicer shocks and some eibach -25mm springs. Keeps it nice and comfortable and slightly lower and stiffer

    • @TheNorville2
      @TheNorville2 4 роки тому +1

      @@TheParrottBros well just fitted some sports Bilstein springs and shocks, get it back next week so will have to wait.

    • @TheParrottBros
      @TheParrottBros  4 роки тому

      That will be lovely

    • @TheNorville2
      @TheNorville2 4 роки тому +1

      @@TheParrottBros Fitted the Bilstein springs but not happy with the front, they seem to sit higher than the back, i was wondering how are yo Eibach springs? what are the measurements? it is now a toss up between eibach and H&R, by the way i have a year 2000 Sline.

    • @TheParrottBros
      @TheParrottBros  4 роки тому

      Neville Carpenter you know what the eibach sit ever so slightly higher at the front too. Back is absolutely perfect though.

  • @colinbell9636
    @colinbell9636 4 роки тому +1

    Sweet 👌🏻

  • @GarageBuds
    @GarageBuds 4 роки тому

    Great video. Very useful

  • @tachyarrhythmia1
    @tachyarrhythmia1 4 роки тому

    Love ur mk1 from Bangkok ^_^

    • @TheParrottBros
      @TheParrottBros  4 роки тому

      Thanks for the comment! Greetings from uk 👋🏻

  • @topmendia
    @topmendia 4 роки тому

    Great video once again!!! I see all your videos. I see that you make a lot of research and spend many many hour doing research for midifications. Have you been thinking about doing remap yourself? 🧐 I would like to contact privately about that. I have spend many many days doing research. I will send you PM about that.

  • @stuarthall6530
    @stuarthall6530 4 роки тому +1

    Think I'll buy a Ferrari instead lol

  • @ScottPC
    @ScottPC 4 роки тому +1

    You say the brakes are not amazing.. I think you meant bloody awful.