Just got one for my truck. Hoping this will last until I can invest in the CP3 conversion. Edit: Just installed it, took me 5 minutes. Prime your fuel system a few times and you’re good to go.
@@JimmieABES they did a recall on all of the CP4’s for 19-20 Cummins. Because they don’t have parts, they’re allowing for aftermarket so long as a shop or ram dealer signs off on the repair they’ll reimburse it(parts/labor), all over the forums and facebook groups with proof
Just installed one on my 2020 Ram 6.7L and now have the “Service Electronic Throttle Control” light on. I did not unplug the battery before disconnect of the old and installation of the new. Truck is running fine just waiting to get scanner and try to clear code
Put it on till the recall, which is already in place . Call your dealer and get on the list. Do not mention that you put this in, and you'll be good to go.
Hey, contact prime diesel and automotive, they are an exergy supplier and can hook you up. Or contact exergy direct. The part number is E05 20505. I don’t know why they aren’t listed online anywhere.
@@tmonei4597 that’s their idea for this product.. I can’t confirm this because I have yet to see a cp4 fail, let alone a cp4 with a fuel system saver. Now exergy seems to be confident in this product with the testing theyve done, so I figured I’d rather take a chance of spending 500$ now instead of more later on if it ever failed.
So just because it uses the same cab, you are okay calling it a 4th generation even though the Cummins engine is completely different and almost everything else was changed on the truck to some degree? It is a 5th generation for the sake of identifying those differences. Suspension components aren't even interchangeable. What else do you want? Ford used the same cab on Superduty trucks all the way from 7.3l to 6.7l!
@@4wdiesels Hey stupid, don’t argue, you’re going to lose. Literally the ONLY thing that matters between generations is the cab/body. You’re pretty new to this, aren’t you? Nobody gives a shit about fords, stay focused junior. We’re talking Dodge/Ram here
Dang i remember being worried at 30k miles.. i went well over 300,000 not skippin a beat before i had the recall done
Thanks for the video
I have a 2021 3500, has the CP3, i feel Ike i dodged a bullet!
Just got one for my truck. Hoping this will last until I can invest in the CP3 conversion.
Edit: Just installed it, took me 5 minutes. Prime your fuel system a few times and you’re good to go.
Ram will reimburse you for one of the aftermarket cp3 kits, I’m milking my cp4 with one of these until it dies personally
@@Drowe218 No way, where did you hear that?
@@JimmieABES they did a recall on all of the CP4’s for 19-20 Cummins. Because they don’t have parts, they’re allowing for aftermarket so long as a shop or ram dealer signs off on the repair they’ll reimburse it(parts/labor), all over the forums and facebook groups with proof
@@Drowe218 that’s awesome news. I’ve been dreading shelling out the $2700 for it lol
@@JimmieABES heck yea I’m about to order mine because I suspect the aftermarket is better than the factory anyways.
So if the pump grenades, this product prevents particles going everywhere, but it doesn't prevent the CP4 failure in the first place, correct?
Yes exactly
Cp4s aren’t 10k to Buy
@@bobbybuchanan6572 no they aren’t… it’s just the rest of your fuel line system and the install total that’s 10k
Just installed one on my 2020 Ram 6.7L and now have the “Service Electronic Throttle Control” light on. I did not unplug the battery before disconnect of the old and installation of the new. Truck is running fine just waiting to get scanner and try to clear code
The CP4 on your truck has been recalled so the CP3 swap is free for you
Can't clear the code; SGW (software gateway) won't allow it.
Do you have the link or website you purchased it from?
Put it on till the recall, which is already in place . Call your dealer and get on the list. Do not mention that you put this in, and you'll be good to go.
There is no part number 20505 and nothing for the 19+ dodges ... can you add a link to where you got yours or where you seen them for sale?
Hey, contact prime diesel and automotive, they are an exergy supplier and can hook you up. Or contact exergy direct. The part number is E05 20505. I don’t know why they aren’t listed online anywhere.
@@boostedfuel5583 the ones I'm seeing online for sale with that part number are for the duramax
It’s on Amazon and ebay
Does this void Warrenty ?
I wouldnt think so.
Where did you get yours from?
Hey I ordered mine from Prime diesel and automotive!
So if the cp4 fails,, u can just put a new pump and not worry about metal shavings damaging you fuel system $15,000 dollar fix?
@@tmonei4597 that’s their idea for this product.. I can’t confirm this because I have yet to see a cp4 fail, let alone a cp4 with a fuel system saver. Now exergy seems to be confident in this product with the testing theyve done, so I figured I’d rather take a chance of spending 500$ now instead of more later on if it ever failed.
@@boostedfuel5583 thank you brother for your help!
@@tmonei4597 no problem man!
I just spoke to rep at wholesaler he said very adamantly this will void your warranty I told him thanks but no thanks
I’m not really worried about it while I’m under warranty but I purchased one for installation the second my warranty is up.
I can’t find it any where just for lml and power stroke and that’s it
I have one that I never installed. I bit the bullet and bought a CP3
It’s a 4th gen. No such thing as a 5th gen HD
So just because it uses the same cab, you are okay calling it a 4th generation even though the Cummins engine is completely different and almost everything else was changed on the truck to some degree? It is a 5th generation for the sake of identifying those differences. Suspension components aren't even interchangeable. What else do you want? Ford used the same cab on Superduty trucks all the way from 7.3l to 6.7l!
@@4wdiesels Hey stupid, don’t argue, you’re going to lose. Literally the ONLY thing that matters between generations is the cab/body. You’re pretty new to this, aren’t you? Nobody gives a shit about fords, stay focused junior. We’re talking Dodge/Ram here
5th gen
@@matafdo123 Doesn’t exist. Thanks for playing rook
@@moparproud3978 I am "MoparProud"....you are "MoparDumb"!