Just think, the factory can do that in about 8 hours to build a complete vehicle. I realize they have computer operated machines that cost thousands of dollars. Still, I think the factory does a good job. This looks much better than the factory job .
Looking awesome! I'm not a plain steel wheel kind of guy myself, but that red with the black rims and red line tires has that A12 vibe and looks awesome!👍
People have no idea how long it takes to do what you did and the nit picky assembly time sweating bullets not to scratch anything. How I would have done the trunk inside clean up was pull the deck lid and lay it on my foam to clean up thing and omg those panels suck so bad. I have done many. Like you said no pressure lol. When I have to do a area like you did on the tail lights I use my camel hair pin stripe brush. You should get one. Handy things. Nice work Joe ❤
I'm really looking forward to seeing that work of art move under its own power. Hey, maybe this Summer you can get Jamie down there again for some more drag racing!!
We will be continuing the build on our channel. Jamie already called and wants the 5X4 disc brake setup. Jamie said he might make another trip down here South.
@ Dont I know it! My poor old 4000lbs base model sedan with the little block has never even been down a track since I’ve owned it. Should run 8-7.8 in the 1/8 if I did the math correctly 🦶🏾
I love it Joe! Perfect color choice and those redline tires look amazing. That thing is gonna look fast sittin' still! If you had to estimate the number of hours you put into this project what would you say?
I would definitely check Facebook marketplace. If you get one from a dynasty or 80’s car, it will likely have a lockup converter and possibly the low first gear set
I think this is just a fish tale!
Looks great!
Haha!
Not too many people will understand, the time and patience it takes. Way to go Joe.
Just think, the factory can do that in about 8 hours to build a complete vehicle. I realize they have computer operated machines that cost thousands of dollars. Still, I think the factory does a good job. This looks much better than the factory job .
@pooks0801 at one point all that was left on my 69 was the rear window
Looks awesome Joe.....keep up the great work... good content and thanks....🔧🔧👍
Thanks for the support! This one is getting close to a real big milestone!
Joe,your bad ass💯
You’re a craftsman Joe .
Thanks brother!
The icing on the cake. Absolutely gorgeous!
Very nice Joe.
Awesome job.
The back of the car all assembled looks awesome. 👌
Thanks Ed! Few more pieces and the puzzle is solved!
@@JustMoparJoe Nice work Joe! 👍👍💯
I think I speak for the rest of us by saying keep the videos coming on this car.
Thank you
Looking awesome! I'm not a plain steel wheel kind of guy myself, but that red with the black rims and red line tires has that A12 vibe and looks awesome!👍
Thank you. That's exactly the look we were going for regarding the A12 vibe.
This car has made me a fan of second gen Barracuda's!!! Awesome job with it Joe!!!!
Thanks brother
And we're still here looking good
Coming together just beautiful
Thanks Grand!
I'm not a big red fan, but the 67-69 Barracuda looks awesome in it.
Yea buddy!
Good looking car. I like the Redlines with the red body. 😎👍
Thanks brother! Redlines on red is the way to go
Beautiful job!
Thanks brother!
Fantastic job, Joe!
Thank you kindly!
Lookn good Joe
Lots of time and effort have gone into this project. It looks beautiful.
Thanks Brother Brad! I appreciate it.
There was a guy in Whitehaven PA did Kay members from Mopar with rack and pinion steering end the disc brakes
Been waiting for this!! Looks amazing
It was a lot of fun to put together!
People have no idea how long it takes to do what you did and the nit picky assembly time sweating bullets not to scratch anything. How I would have done the trunk inside clean up was pull the deck lid and lay it on my foam to clean up thing and omg those panels suck so bad. I have done many. Like you said no pressure lol. When I have to do a area like you did on the tail lights I use my camel hair pin stripe brush. You should get one. Handy things. Nice work Joe ❤
Has the owner seen the car in person yet? It’s absolutely gorgeous …
Not yet, but we are excited to see it!
You should talk him out of the gen 3 hemi swap! Build him a nice little small block 👍
It had a really nice 408 SB but I just wanted to play with a G3 Hemi as I have never built one.
That notchback looks stunning. Great job, Joe.
Thanks Buddy!
Sick fish, can't wait untill it rips the tires off with a Gen 3 HEMI in it! Great job Joe!
I'm really looking forward to seeing that work of art move under its own power.
Hey, maybe this Summer you can get Jamie down there again for some more drag racing!!
We will be continuing the build on our channel. Jamie already called and wants the 5X4 disc brake setup. Jamie said he might make another trip down here South.
Thanks Peter! I’ll work on him
He must be a very good friend to get that meticulous detail
I like to think so😎
Good people! But I try to give every job my best effort
Damn nice job on body and paint! One slick Fish!
Thanks man, appreciate it!
Pretty!
Thank you 🙏🏼
It came out beautiful. You should really be proud of that job.
Thank you, Kenneth!
Looks great !
Thanks brother!
Its just about to go ZOOM Looks good.
Thanks Mike!
Dig those magic invisible backup lights! Groovy, man.
Gonna be a show stopper !
Thanks brother
Red's not my favorite but the black and silver trim goes well
For sure! The trim was a big help
Wow, the back being installed transformed it totally. Good work Joe
Thanks Jeff!
I can't wait to see joe drop in hellephant 426 crate on this bad boy.
Haha! It’s getting something similar
Joe I'm lost for words my brother
Thank you!
Those that know....know. Joe? I know. 🙂
The struggle is real and you do fine work, sir.
- Ed on the Ridge
Thanks, Ed! I appreciate the support!
You are an inspiration to the rest of us, Thanks for sharing!
Thank you! I appreciate the support!
Oh yea still looking good bud
Thanks Don!
Joe wait to I get my Rod I’m Hooked .👌🇦🇺✌️.
Awesome!
At first glance, the back looks super cool.The bumper makes it look dumpy
It’s got some cool lines
Perfection is just Mopar Joe away!!
Haha! A long way from it, but I’ll try to chase it
Dead Sexy mate... just looks better and better as parts get cleaned and put back on!!!
Thanks buddy!!
Looks absolutely amazing! And yes, I've been having those days lately, where I work all day and don't feel like I got much done.
I know the feeling, it's a tough one for sure!
Guess we'll have to change your name to Joe van Gogh artiste extraordinaire.
I like that!
Looking awesome.
Thanks brother!
Oh man
Wet spot
✌️
I could have sent the tail lights to you to paint up!
Beautiful car!
Thanks Paul!
What a beautiful car!
Thank you!
A++ Joe 😊
👍👍👍
Thanks buddy
Love the redlines with the red car! That’s B body quality right there. 🦶🏾
It’s already faster than a few that I know of 😂
@ Dont I know it! My poor old 4000lbs base model sedan with the little block has never even been down a track since I’ve owned it. Should run 8-7.8 in the 1/8 if I did the math correctly 🦶🏾
Bob Ross on the tail lights 😂
Happy accident
And don't the bumpers fit front and rear on that year?
Yes sir
Your paint work has come a long way really nice work.
Thank you, I appreciate it!
Where is the best place to buy chrome bumper bolts?
AMD
I love it Joe! Perfect color choice and those redline tires look amazing. That thing is gonna look fast sittin' still! If you had to estimate the number of hours you put into this project what would you say?
I’d have to guess somewhere around 300
Joe, how do you charge on a project like this?
I do an hourly rate. Hopefully I get better at quotes lol
All that Bling you will be to scared to do a burnout 😂😅 great job, thanks for sharing, all the best to you and your loved ones
Thanks Donald! Same to you!
Any idea where he got his rear window trim?
@@Coronetguy I’m sorry I couldn’t respond earlier. That is the original trim for the car. It was very complete because he owned it since 1983
@ no problem.. I have a 68 barracuda notchback as well . Who ever put on the trim looks like they used a mallet… dents all thru it 🤬
🆒
Thank you 🙏🏼
Great job luv it !!!
Thank you!!
looking for a 318 and 904 for a 72 charger know anyone in springfield mo
I would definitely check Facebook marketplace. If you get one from a dynasty or 80’s car, it will likely have a lockup converter and possibly the low first gear set
take the deckoff
👍👍
Thanks brother
👍👍👍👍
Thanks brother