Great video. FX will indeed be selling just the bushing for those who want to convert their bottles for use on the M3. According to Sweden Parts should be arriving in the USA mid to late June…
Ik denk dat je deze bu al bij elke FX dealer kan kopen , maar zou er wel speciaal bij zeggen dat het voor een M3 is . Beste kans is bij Krale Schietsport
Hi, I hope you're keeping well and safe. I've been watching your videos and since our last online conversation I've purchased an M3 Sniper which arrived a couple of days ago. I wonder if you can clarify a puzzle for me...... FX, in their user manual for the M3, talk about "Never shooting the rifle when the bottle pressure is below the Regulator pressure setting". This was fine for the Impact MKI and MKII with just one regulator. BUT M3 has two regulators! So is FX talking about the 1st Regulator setting (factory set on my rifle at 170 bars) or the 2nd Regulator? One would assume it is the 2nd Regulator because otherwise it would mean that one would have to repressurise the bottle so frequently as 170 bars (on my rifle) is a relatively high setting! Logically, it would be the 2nd Reg pressure but FX should have made that clear as they say NEVER fire the rifle below...... As always thoroughly enjoy your videos and look forward to your next. Many thanks, take care.
Hi , yes your thought is correct 👍🏻 indeed they mean never shoot below the pressure of the second regulator. The first regulator is there to pre reduce the higher bottle pressure to a lower one so the second one can work more consistent. The reason why they say you can’t shoot below the pressure of the second one is that you can damage the valve if there isn’t enough pressure behind it
@@Airbuks That's great, thank you very much. I hope you'll do a tuning video on the M3; perhaps in 2 parts. First covering say 900fps for JSB 18.13 and then for the 2nd part a more powerful tune setup to shoot accurately say a H&N 25 or 27 grains slug but using the factory supplied sniper rifle with the barrel and pellet port that come with the rifle. Most people who have bought this rifle would dearly like to see your quality produced videos showing that. Thanks again. Take care.
@@Airbuks I think that will appeal to the American audience. NSA slugs are not so popular (I think) or available in the UK and most UK shops only stock H&N slugs. They are also far less costly. But obviously you can decide and it will be informative which ever you decide on. Take care.
Primeiro like se poder poderia mandar uma foto de você é impact já até tenho pelo celular um fã é colocar em álbum se mando meu gmail para você coloca como sempre desejando muito sucesso
Great video. FX will indeed be selling just the bushing for those who want to convert their bottles for use on the M3. According to Sweden Parts should be arriving in the USA mid to late June…
Thx for the extra information 👍🏻
Nothing likr a little "blood "to get everybody's attention, you're a great illustrator...
👍🤣 thx
a master at work what more can one say
Thx for the support 👍🏻
thumbs up like always to help you!!very good video!you are the best
Thx 🙏🏻
Please do a review when dual reg set-up is available on the mk2.
I will 😉👍🏻
Good video as usual 👍🏻
Thx
Informative. Thanks.
Fantastic videos as always, the Impact just looks right with the 580cc bottle, do you know if the new bottle valve is stainless steel?
Hi thx , you making nice videos aswel 👌🏻
I don’t know exactly what material it is but it ain’t aluminum 🤔
Do you need to apply loctite or some form of thread locking compound to the threads when reassembling?
I don’t use any thread lock of any kind the orings seal just fine
Exelente al MK II se le puede instalar la botella ??
English ?
Where can I purchase the M3 valve to convert my MK2 bottle to an M3?
You can order them from your Fx dealer or in places like Krale Schietsport, best fittings etc
Buenas el regulador # 1 de la M3 se le puede montar a la FXMK2 aunque no quede con el manómetro adelante le sirve. ?????
English 😬
@@Airbuks good the regulator #1 of the M3 can be monte yo the MK2 even if it does not Fit with the.pressure guage un front of it ????
@@tomatepintor6203 as far as I can understand your question 😉 no there is no option to add the 1st regulator to a impact MKII
Sir please make a video of installing huma fx wildcat mk3 power plenum and huma regulator.
I would like to but I don’t own a wildcat 😏
What dimensions are both air tanks? (length and diameter)
Hi i just ordered a .30 cal Maverick VP, with 400cc al. bottle will this work with my Impact M3 ???
It depends on the valve used in the alu bottles , the M3 needs a valve with the copper bushing on it
Do u know where and if u can already order a complete bottel valve for the M3?
Ik denk dat je deze bu al bij elke FX dealer kan kopen , maar zou er wel speciaal bij zeggen dat het voor een M3 is . Beste kans is bij Krale Schietsport
@@Airbuks Zal vrijdag eens bij Krale vragen. Krijg binnenkort 700 cc carbon fiber flessen uit China.
@@MeijerhofT 700cc 🤓 nog nooit gezien
👍👍👍👍👍
the part that removes the air from we can buy it
Yes you can buy the valve separately at most FX dealers
Thanks, does anyone know of a good dealer?
@@antrious krale Schietsport
Hi, I hope you're keeping well and safe. I've been watching your videos and since our last online conversation I've purchased an M3 Sniper which arrived a couple of days ago. I wonder if you can clarify a puzzle for me...... FX, in their user manual for the M3, talk about "Never shooting the rifle when the bottle pressure is below the Regulator pressure setting". This was fine for the Impact MKI and MKII with just one regulator. BUT M3 has two regulators! So is FX talking about the 1st Regulator setting (factory set on my rifle at 170 bars) or the 2nd Regulator? One would assume it is the 2nd Regulator because otherwise it would mean that one would have to repressurise the bottle so frequently as 170 bars (on my rifle) is a relatively high setting! Logically, it would be the 2nd Reg pressure but FX should have made that clear as they say NEVER fire the rifle below...... As always thoroughly enjoy your videos and look forward to your next. Many thanks, take care.
Hi , yes your thought is correct 👍🏻 indeed they mean never shoot below the pressure of the second regulator.
The first regulator is there to pre reduce the higher bottle pressure to a lower one so the second one can work more consistent.
The reason why they say you can’t shoot below the pressure of the second one is that you can damage the valve if there isn’t enough pressure behind it
@@Airbuks That's great, thank you very much. I hope you'll do a tuning video on the M3; perhaps in 2 parts. First covering say 900fps for JSB 18.13 and then for the 2nd part a more powerful tune setup to shoot accurately say a H&N 25 or 27 grains slug but using the factory supplied sniper rifle with the barrel and pellet port that come with the rifle. Most people who have bought this rifle would dearly like to see your quality produced videos showing that. Thanks again. Take care.
@@ursine010155 I will take it into count , I was thinking making a video to shoot 36gr 25 cal nsa slugs out of a 600mm barrel with the M3
@@Airbuks I think that will appeal to the American audience. NSA slugs are not so popular (I think) or available in the UK and most UK shops only stock H&N slugs. They are also far less costly. But obviously you can decide and it will be informative which ever you decide on. Take care.
@@ursine010155 good point, didn’t know that . I will maybe try to incorporate both 😉
Is there a way to use the M3 valve with an FX Crown? From what I see here, I cannot see why it should not work.
Hey , the M3 valves can be used on all FX guns , I have a M3 valve/bottle on my crown right now 👍🏻
@@Airbuks so does that mean you can use it to make a crown have a double regulator setup?
@@sambaaxe no , the difference in the bottle is just the valve it has nothing to do with a double reg setup for the crown
@@Airbuks Do you have any idea if it would be possible to adapt the bottle reg to work in the Crown?
@@sambaaxe i am afraid that wouldn’t be possible as the threads size on the bottle adaptor is different
how to buy. im from the philipines
Ask it in your local FX dealer
I wish i have one
😬
How much
Fx filling their pockets with the money of stupid accesoiries again. It's getting sad at this point.
Primeiro like se poder poderia mandar uma foto de você é impact já até tenho pelo celular um fã é colocar em álbum se mando meu gmail para você coloca como sempre desejando muito sucesso
Sorry mate , don’t speak Spanish 😬