Superoxides in wastewater treatment || Advanced oxidation process || Fenton process in wastewater

Поділитися
Вставка
  • Опубліковано 27 жов 2024

КОМЕНТАРІ • 16

  • @subinganesh
    @subinganesh 4 роки тому +4

    Expecting more videos on cod treatmemt

  • @HardeepSingh-xw3uz
    @HardeepSingh-xw3uz 4 роки тому +1

    Good

  • @subinganesh
    @subinganesh 4 роки тому +1

    Super

  • @sanjayrathore370
    @sanjayrathore370 4 роки тому +2

    Mam mene apse question kiya tha apne javab nhi diya. BOD ko jab nikalte tab chemical dalne pr color kyo chenj hota h. Jaise- NaN3 NaN3 color orange H2SO4 color less starch color Blue. Please answer mam.urgent.

    • @MeenuJainLalitpur
      @MeenuJainLalitpur  4 роки тому +1

      Chemical ke dwara titration karne se pH change hota hai or chemical reaction hoti hai jisse colour change hota hai....

    • @sanjayrathore370
      @sanjayrathore370 4 роки тому

      Thanks mam

  • @kp6090
    @kp6090 3 роки тому

    Which catalyst is to be used along with H2O2 and calcium superoxide

  • @Bollywood20219
    @Bollywood20219 4 роки тому +1

    Ma'am filter press ke baare me kb bataogi ap

  • @pratikjambhale855
    @pratikjambhale855 4 роки тому +1

    Hello mam .."My Aeration Tanke PH increased" .It's 8.5 how redus pH mam ?? Please help

    • @MeenuJainLalitpur
      @MeenuJainLalitpur  4 роки тому +1

      Kya Aapne airation tank ke pahle lime ya koi aur dosing ki hai? Yadi ha to kitna dosing kiya hai? Kyu ki lime dosing jyada hone par pH badh jata hai.

    • @pratikjambhale855
      @pratikjambhale855 4 роки тому +1

      @@MeenuJainLalitpur yes ...lime use karate he hum ...But Airation inlate water pH 7.5 milata he ...??

    • @MeenuJainLalitpur
      @MeenuJainLalitpur  4 роки тому

      SST ke outlet pe ph kya hai?

    • @pratikjambhale855
      @pratikjambhale855 4 роки тому

      @@MeenuJainLalitpur Mam SST ??? Mere yaha DAF hai ...DAF out late water hum airation me feed karate he ...

  • @HardeepSingh-xw3uz
    @HardeepSingh-xw3uz 4 роки тому +1

    Mam svi level is so high in our sbr basins due to filamanous growth
    Now what can I do can i dose H2O2 in sbr basins

    • @SuperweldEcosolutions
      @SuperweldEcosolutions 4 роки тому

      Causes of Filaments are low oxygen concentration, low F/M, septicity, nutrient deficiency, low pH and high grease and oil.
      We recommend that you may use a advanced Bioculture product like SUPER 24 and OXYSUPER to enhance the oxygen .this will give well settling MLSS. Also check if too much of oil and grease is not causing this growth.
      Team Superweld. www.superweld.in

  • @lomashyadav817
    @lomashyadav817 4 роки тому +1

    Hindi me please mam .