Just ordered a Panzer Arms M4 and have been trying to figure out how to get the +2 capacity. Thank you.... this is a project that is well within my wheelhouse.
@@jnepute I ended up buying a complete magazine tube. From everything I have read, there isn't an extension that will fit the Panzer M4 without modification. The magazine tube fits without modification but sends you down the 922r rabbit hole.
@@CatRacer1A2A Just adding an extension also sends you down the 922r rabbit hole, as there would still be a 5 round limit on the imported shotgun due to the "other" parts all being foreign...unless the Bruen decision invalidates that particular section of the 1968 Gun Control Act. With no precedents as of this post, there is legal risk in just adding the extension alone.
@@RK0957 certainly not to argue, but I was under the impression that the 922r is simply parts based, not feature based. I don't recall where I read it, but I was told that the extension doesn't count as a "part" where as the magazine tube is considered a "part".
Thanks again for video, it's gonna help alot of people get this thing running. Took mine out today and ran about 100 rounds of different makes and loads through it without having a single hangup. Hell of a margarita 🍹 maker, Gallagher would approve 👌
This is the kind of thing that some people would point to in eliminating this as a viable gun . Not me ! I'm always up for a challenge when working on any gun . Good job and please keep the videos coming .
Not sure if anyone can help me, but my KZ extension was hell to get onto my SDS S4. My OE mag end cap threaded onto the mag tube fine, the old false extension threaded into the KZ cap fine, but the KZ cap would not threaded onto the mag tube without force. It would grab one thread and that was it. I ended having to put the OE mag cap onto the KZ extension and using a pipe wrench to thread it to the mag tube. I would screw it on a few threads, back it off, and check it with the mag cap. The mag tube threads were fine doing it this way. Not sure what Is going.
I’m running into the same exact issue that you have. Did you get your extension to thread all the way down on the mag tube with your method? I need an extra quarter inch to allow the end cap to tighten down on the barrel.
Just ordered a Panzer Arms M4 and have been trying to figure out how to get the +2 capacity.
Thank you.... this is a project that is well within my wheelhouse.
Did you end up having to modify the threads on your Panzer M4 mag tube or extension?
@@jnepute I ended up buying a complete magazine tube.
From everything I have read, there isn't an extension that will fit the Panzer M4 without modification.
The magazine tube fits without modification but sends you down the 922r rabbit hole.
@@CatRacer1A2A where were you able to find a full tube that was available?
@@CatRacer1A2A Just adding an extension also sends you down the 922r rabbit hole, as there would still be a 5 round limit on the imported shotgun due to the "other" parts all being foreign...unless the Bruen decision invalidates that particular section of the 1968 Gun Control Act. With no precedents as of this post, there is legal risk in just adding the extension alone.
@@RK0957 certainly not to argue, but I was under the impression that the 922r is simply parts based, not feature based.
I don't recall where I read it, but I was told that the extension doesn't count as a "part" where as the magazine tube is considered a "part".
Thanks again for video, it's gonna help alot of people get this thing running. Took mine out today and ran about 100 rounds of different makes and loads through it without having a single hangup. Hell of a margarita 🍹 maker, Gallagher would approve 👌
This is the kind of thing that some people would point to in eliminating this as a viable gun . Not me ! I'm always up for a challenge when working on any gun . Good job and please keep the videos coming .
It's always nice to see your video sir, please keep going 😍💪 regards from Iraq
Good to see you back, buddy i was a committed follower in the old a kay days
Turkenelli! I love it. I have a Girsan that I call my Benotti; quite sufficient for shooting sporting clays 2, maybe 3 times a year.
You are very cool, your content is very useful unlike others
Good info, thanks for posting!
I love your videos. Absolutel King
I would like to see you build ak’s again
Was your clone a panzer branded gun? Using the same extension on my G Force gun required shortening the extension (which I did) or adding a spacer.
Not sure if anyone can help me, but my KZ extension was hell to get onto my SDS S4. My OE mag end cap threaded onto the mag tube fine, the old false extension threaded into the KZ cap fine, but the KZ cap would not threaded onto the mag tube without force. It would grab one thread and that was it. I ended having to put the OE mag cap onto the KZ extension and using a pipe wrench to thread it to the mag tube. I would screw it on a few threads, back it off, and check it with the mag cap. The mag tube threads were fine doing it this way. Not sure what Is going.
I’m running into the same exact issue that you have. Did you get your extension to thread all the way down on the mag tube with your method? I need an extra quarter inch to allow the end cap to tighten down on the barrel.
where to find one to match the nickel version?
Will this fit a real benelli m1014 tube
👍👍👍
Will this work on a legit benelli m1014/m4
Does anyone know if the KZ will fit a Benelli? Or is it just for clones?
Did you have to install the snap ring on the end of the mag tube extension? Wasn't sure if I missed that in the video?
yes you do. He must have forgot to do that. Panzer arms has a video how to do this too.