thanks for featuring one (well 2) of my models (bat cat and cat) , I`ve been a subscriber for a while and seeing a model of mine in one of your videos is nice 🙂
The Thermal Runaway t-shirt is fabulous! You always have the best t-shirts! Great models as always. I especially love the parametric chain candle stands for Halloween or any time of year. And I’m totally printing the candy corn tissue box cover for my mother, who is a huge candy corn fan. -Courtney
The pun myster does it again. Great ideas from fabulous creators. Like the fact that you chose the non-AMS versions to feature. Not everyone has multicolour available. Post a link to where you buy your T-shirts. They are always eye-catching.
That ghost tea light holder is awesome. I've already printed a bunch for Halloween gifts for friends. This video was SCARILY timely. Thanks again Bryan!
Thanks!! I have 4 ghosts printing out right now on the Bambu X1C. Have some flickering white tealights LEDs on order now. Also ordered Orange, I'm sure I can find a Jack'o Lantern that uses orange tealights.... Thanks again!!!
Hello! I have emailed you before. Very cool! I think after watching your video about holiday decorations I have a better option than buying them: to make them myself using a 3D printer! What are you going to do in your next video, we would like you to try to do it with our filament. If you're interested, I've written down the details in an email and I hope you'll check it out! Best wishes!
On Sunday 13th October 2024 Space X did it, a perfect 5th Launch of the Space X Starship & Super Heavy Booster! Then they did make history by catching the super heavy booster on the 1st try with the mega-zilla chopsticks. big sonic boom as it did so. The starship did a perfect orbit to the Indian Ocean and flew down to do a perfect soft water landing, with the space x filming water floats there in the landing water zone to see it. But for some odd reason the starship blew up after water full touch down? Still truly amazing event.
Hi, you missed a few steps: Step 1 - Spend a few hours scrolling through hundreds of available models Step 2 - Find a handful that look fun and may have mass appeal Step 3 - Print said models over the course of a week Step 4 - Write script Step 5 - Record B-roll Step 6 - Record A-roll Step 7 - Spend a day editing video Step 8 - Upload video Step 9 - Spend an hour editing description, closed caption text, and adding chapter markers. Step 10 - Release video Step 11 - Get comments from a person who seems to think that an edited, scripted video with an eight minute runtime, featuring a bunch of prints, takes 8 minutes to record and requires zero effort.
Came here for 3D printing content and puns...
Never a disappointment! Thank you!
Haha! Thanks! 😊
thanks for featuring one (well 2) of my models (bat cat and cat) , I`ve been a subscriber for a while and seeing a model of mine in one of your videos is nice 🙂
Thanks for making those models! I thought they were really well done, and my wife thought they were super cute. 😊
I agree with @BV3D. They are super cute!
Great presents for my family, even when it is not Halloween.
What fantastic designs. Really glad you’ve taken the time to design and release these prints for us to enjoy.
The Thermal Runaway t-shirt is fabulous! You always have the best t-shirts! Great models as always. I especially love the parametric chain candle stands for Halloween or any time of year. And I’m totally printing the candy corn tissue box cover for my mother, who is a huge candy corn fan. -Courtney
Thanks Courtney! I'm glad you like the tissue box cover and the MakerDeck shirt! It seemed like an appropriately scary theme. 😉
The pun myster does it again.
Great ideas from fabulous creators.
Like the fact that you chose the non-AMS versions to feature.
Not everyone has multicolour available.
Post a link to where you buy your T-shirts. They are always eye-catching.
Hi! Thanks - and here's where that shirt is from: www.redbubble.com/i/t-shirt/Tales-From-MakerDeck-Thermal-Runaway-by-MakerDeck/122749094.FB110
That ghost tea light holder is awesome. I've already printed a bunch for Halloween gifts for friends. This video was SCARILY timely. Thanks again Bryan!
😊 You're very welcome! I wanted to make sure people had plenty of time to print stuff for Halloween!
Thank you, those ghosts are just what we needed.
And I bet my nephews will enjoy the nails too.
Lots of great models for sure. Need to make the Frankenchunk my next project.
It's a fun one, for sure. I will note that it can take a fair amount of force to insert the hands into the arms, though.
@@BV3D Thanks, good to know.
Thanks!! I have 4 ghosts printing out right now on the Bambu X1C. Have some flickering white tealights LEDs on order now. Also ordered Orange, I'm sure I can find a Jack'o Lantern that uses orange tealights.... Thanks again!!!
All are great prints. I can’t pick a favorite. 👍
Silly tip: add red paint to the nail
Had already printed the stabby cat.
Thanks BV3D.
You are very welcome!
what type of filament are those printed with, PLA ABS etc?
They're all printed in PLA from various companies.
Thank you.
Love me some candy corn! ❤ 🍬🌽
The Frankenstein book end looks like an older Corey Feldman....the comeback king lol
To me, it kind of looks like Lee Majors from the 1970s. 😄
@@BV3D Lol. I can see him too now that you mention it.
Hello! I have emailed you before.
Very cool! I think after watching your video about holiday decorations I have a better option than buying them: to make them myself using a 3D printer!
What are you going to do in your next video, we would like you to try to do it with our filament.
If you're interested, I've written down the details in an email and I hope you'll check it out!
Best wishes!
I came for the jokes and stayed for the thumb nails. Not disappointing.
Haha - Thanks!
Thumbnail...HAHAHAHAHA!!!!!
On Sunday 13th October 2024 Space X did it, a perfect 5th Launch of the Space X Starship & Super Heavy Booster!
Then they did make history by catching the super heavy booster on the 1st try with the mega-zilla chopsticks. big sonic boom as it did so.
The starship did a perfect orbit to the Indian Ocean and flew down to do a perfect soft water landing,
with the space x filming water floats there in the landing water zone to see it.
But for some odd reason the starship blew up after water full touch down?
Still truly amazing event.
Step 1: Sort by trending
Step 2: Free video
Hi, you missed a few steps:
Step 1 - Spend a few hours scrolling through hundreds of available models
Step 2 - Find a handful that look fun and may have mass appeal
Step 3 - Print said models over the course of a week
Step 4 - Write script
Step 5 - Record B-roll
Step 6 - Record A-roll
Step 7 - Spend a day editing video
Step 8 - Upload video
Step 9 - Spend an hour editing description, closed caption text, and adding chapter markers.
Step 10 - Release video
Step 11 - Get comments from a person who seems to think that an edited, scripted video with an eight minute runtime, featuring a bunch of prints, takes 8 minutes to record and requires zero effort.
another good video and ideas. keep it up there fun.thanks Onerazz3
Thanks OneRazz!