Bosch Washing Machine Door Lock Replacement Maxx Classixx
Вставка
- Опубліковано 27 сер 2024
- Quick guide on how to replace a faulty door lock on a Bosch washing machine.
If the door on your machine does not lock and the machine does not start a cycle, most likely the door lock on your machine has failed and needs replacing.
Bosch washing machine E3 error is a door lock error. The first thing to do if this error appears on your machine is to replace the door lock. In most cases this will fix the E3 error on Bosch washing machine.
Bosch washing machine door lock Part no: 610147, 00610147 00631638 is used in this video.
Mate, thank you so much, you're a legend! My door lock fell inwards, now I'll have a go at fixing it with some idea of what I'm doing.
Thanks heaps! I got the lock out as shown. When I wiggled it, a loose piece of gravel fell out. So I put it back in and now it works like a charm.
Thanks, all fixed.
Thank you very much,you saved me a service visit
You’re welcome. Glad you liked the video.
Thank you for watching.
Thank you
Thank you much easier then I thought!
Thanks a lot! Very helpful video 👍
Excellent video!!
Thanks for the video. Our machine is only 2 years old and is leaking at the front bottom the door feels a bit loose so could this be the issue??? Cheers.
That's but... flipping star!
Great video, thanks. How do you get the door open to replace if handle does not release door?
Turn it off at the power point for about 5 min and the door lock should release the door. If it still doesn’t open, then the door handle might be broken or the lock is stuck in the locked position.
I took the switch off an there's a black strip of plastic bit like a riptie but has a loop on the end I can see, does anyone know what it is ? I've looked to see if it fits the switch somewhere but ? Shall I just ignore it, my machine was just showing the lock no numbers an just wouldn't stay on a program, the door wasn't locked so figured I'd need new switch, this black thing has thrown me a bit 😆 anyone???
E 02 error i want to reset ?
Most likely the motor brushes are worn out.
Varioperfect maxx 6 reset
Try this:
- Close the door
- Set program selector switch to position 0 ("OFF")
- Wait two seconds
- Set program selector switch to position 8
- Wait until the start LED is flashing. (will take about two seconds)
- Wait two seconds
- Press and hold “Spin Speed” button
- Set program selector switch to position 9 - Release the “Spin speed” button.
- Error display "Last program" - Display indicates last error
-error memory is cleared now