How I Spend my 150K Salary: ua-cam.com/video/g1FGX9bfWEI/v-deo.html What are Mechanical Engineering Interviews Like: ua-cam.com/video/HfsBMNKRObo/v-deo.html A Day in the Life of a Mechanical Engineer: ua-cam.com/video/jAqowG4fm8Y/v-deo.html What Software do Engineers Need to Learn: ua-cam.com/video/F1SRnJqDPbI/v-deo.html Check out my list of ME Technical Questions: payhip.com/EngineeringGoneWild
@@theworldismine7788 Technically yes. There are people who work as mechanical engineers who don't have a degree. But a degree is often required, so if you want to be a mechanical engineer you should get the degree. But beware that many people have the degree and cannot get employment in this field.
Finally an accurate video about a job that gives an idea what a mechanical engineer actually do. Usually people do a "day in a life of ..."-video and then they just film themselves eating.
Yep they don't say anything important or the needed details like in the video, you will just see them working on their computers, or doing things without telling what they do, or the steps. It's a very good video
Very well done. I do manufacturing engineering work for medical device companies and have a lot of the same responsibilities. I wish universities taugh more of this and not just math/science theory.
Hey man, I'm thinking of doing MS mechanical engineering in the US. Would you suggest me to carry on, or try to switch to fields like industrial engineering?
@@joswa5251 Both degrees are good, but I would say that mechanical gives you a broader base. If you know that you definitely want to work as an industrial engineer, then that is fine too. To be honest, it does not matter that much anyways.
Same, I hated that college doesn't teach you useful stuff but drive your focus away into the theory math part, which, you can just learn/copy base on the case you got
I have started my career at 1984. My the 1st project was to design a storage for neutrons to boost nuclear explosion. 1. Selection of materials to store neutrons for years before a missile would be launched.2. Guarantee neutrons would be stored for years but released simultaneously into active zone of the nuclear warhead to boost chain reaction 3.Drawing and tests at different environmental conditions 4. Selection of processes and development them to deliver neutrons to the active core of the warhead simultaneously etc. My manager used to help me with explosives because I wasn’t certified to work with hazardous materials.
@@Alan-mq9om IMHO, the 1st nuclear project met a similar problem. I’d like to say, it is few decades old science. I use deuterium as neutrons source. Major problem I had solved was to synchronize neutrons delivery to the core when critical mass formation gets started. Nanoseconds critical process. The 2nd important problem was number of neutrons delivered to the core should be as expected, about same as total number of neutrons stored in storage. Wasting of neutrons in the delivery path would be an issue for the entire project. Imho, such kind a project is kind of basic problem in modern course of physics at any U. I don’t know exactly, my degree belongs to 1984, this project was done by me right after graduation in KB-11 if you are familiar with Soviet era Ministry of Medium Machinery in 1984-1985. I guess, it should be used in ICBMs USSR developed that time. I was quickly moved to another design company to develop thermobaric weapons and I wasn’t a part of underground tests. But I had tested my work in special blast protected lab and that worked as expected. Imho, any student working on his/her master degree in physics doing something similar at lab work. I used to have more interest that time to computer model of such process to develop computer model based on my experiments to describe the phenomena as close as possible to my tests. It was fun project for me, and I’m proud even today about my work to improve ICBM performance. BTW, at some point I was certified to work with hazardous materials
the whole time I was watching this video, I kept thinking "This sounds so cool!" I am heavily considering going back to university for mechanical engineering and this video is making me believe that's a good choice, because I always get so excited watching these videos.
if u consider going back to school either focus on robotics OR manufacturing OR do computer eng/sicence; NOT a typical mechanical eng. this video is a flat lie.
Crazy high quality content! The editing wasn't groundbreaking or anything, but you really focused on what the viewer needs to hear and edited around that. Subbed 👍
Most people have little understanding of what engineering actually is. Engineers have to combine scientific and mathematical knowledge with pragmatic, practical solutions whilst applying commercial acumen. Engineering is a very demanding high paced profession that requires a strong intellect, inventiveness, acute concentration and consistent attention to detail. Engineers apply standards of professionalism to their work that is rarely matched by by other professionals.
I am an automotive mech engineer. I design automotive interior products. Thank you for your video. My long-time queries about how engieers’ jobs are in different industries finally got resolved👍🏻 Now I understand the same or similar development processes are taken in different industries as well.
Hey Idk if your gonna see this but I love cars and engineering and what you said you do is basically one of my dream jobs, if I may ask you how you got to where you're at? What sort of qualifications did you need to get that job?
I am in my junior year of high school and am a mid range student who would like to major in mechanical engineering. What does it take? What should I do now?
Good content right there. This video has all that a new student would need to know about how every thing learnt fits together! My school failed miserably at teaching where and when different subjects were needed. Every school ought to have similar discussions where product development phases are discussed along with the subjects that apply during different phases.
So right!; FMEA isn't taught in ME school much, yet it's so important. Same with GD&T, which is important for creating detail drawings which will dictate processes, fits, and tolerances across diverse supply chains.
@@MisterBinx Good for you! A CAD model is essentially a platonic ideal, while 2D detail drawings are often what suppliers/vendors work with to produce individual real-world components. As such, these drawings essentially become legal documents which define terms of a contract. It's in everyone's interest to minimize confusion/ambiguity and ASME Y14.5 is the most comprehensive standard for this. Learning it is akin to acquiring a language. Once fluent, design intent can be communicated precisely and efficiently. Good luck to you!
I can’t speak for other MEEN programs, but about half of my senior design class covered FMEA at Texas A&M. They made us use FMEA so much that it became redundant at a certain point for my project, although I’m sure it greatly benefitted other teams. I can’t say we ever touched on GD&T though.
Exactly. Although Ironman, star trek, and the like are a HUGE inspiration for engineers, it isn't that easy, lol. "Tont Stark was able to build this IN A CAVE! WITH A BOX OF SCRAPS!"
Lol I am not majoring in mechanical engineering but I wanted to until I got a clear understanding that you can build iron man looking suits that fast I also thought it would’ve been a 1 person job
This dude be speaking in semi formal for the whole video, and then suddenly its the validation stage and he goes "in this stage we test the sh** out of the product"
@@polishherowitoldpilecki5521 my own experience + my colleagues + statistics (check ANY credible website). Rarely a mech eng will get 150K; or any other engineer with the exception of computer eng. just google it.
With bachelors it’s been about 70k for a while but goes maybe closer to 90 for higher cost of living areas. Many people don’t break 6 figures until they have a good chunk of experience.
Dude, the video isn’t click.. Bait . The video isn’t about how much the engineer will make. It’s about what he does as a mechanical engineer, just read the title.
Great videos ! Keep it up ! Please share something on Medical Devices Engineering sector. Product development part is almost the same, but to understand job markets over the globe.
I've been looking for this topic for years! You are very informative! Please make more videos further breaking down the steps, like a series! Thank you so much! SUBSCRIBED!!!
There is also a misconception that engineering work is interesting. I think one needs to have a high tolerance for excruciatingly tedious and mind-numbing work to be an engineer. I hated every engineering job I had and wished that I had not spent the time, money, and work on getting a BSME. Went back to school for several years in my 30's and became a biology professor for much less money.
This is the first videos thats explained what I actually want to know before I sign up for school😭 Thank you!! How long do you typically spend on a project, start to finish? Also do you usually work on multiple projects at a time?
Very interesting video. Interesting using an iPhone as an example For the people in the comments who are in their first years of school or aren't yet in school for ME I recommend joining clubs such as student racing teams. I joined one of those and even though I didn't give everything I could've given to it, there are some experiences I'd taken for granted that apparently are not that common, such as FMEA analysis, and other things you just don't learn in class, like talking to suppliers, talking to people from other disciplines, talking about money... I specifically say "student racing teams" because the one I was a part of had an "industrialization" component of the project, even though you worked on a physical prototype, you were supposed to think about it with this industrial-production mindset. Some other competitions like robotics etc may differ a bit but they're probably a good idea too.
I express my sincere interest in pursuing a bachelor's degree in mechanical engineering. Given my technical college experience in 2016, I seek guidance on recommended courses to commence my academic journey in 2023. Thank you.
This video gave me PTSD. Spent most of my early career as a Mechanical Engineer doing product design in the mining and oil and gas industries. Loss my interest in engineering and moved on to Project Management. Occasionally I still have to put on my Mechanical Engineer hat but overall I am glad I got out of it.
Hello, can you please make a video on the best industries to work for? Should I join a smartphone company, a construction company or join a different industry. Which has the highest room for opportunity and growth?
What’s the part of the product life cycle where they’re engineered to fail shortly after the warranty expires? Which engineers are responsible for making products unserviceable? Or for using proprietary accessories and connectors instead of ones that use universal formats?
High voltage electrical power engineer here with about 20 years experience - the quoted salary is more for an experienced engineer. Engineering itself is high stress and high liability. Work load is high and no one but you and your fellow engineers understand the complexity and consequences of the work you do. Your MBA and accountant management tell you how slow you are and how much you overspent. But if a catastrophic incident happens, you will be the one responsible. Switched to project management, best career move ever. All careers need hard work and endure some level of risk. Medicine pays 5 times higher.
LOL My wife is a pharmacist. She completed her doctorate 20+ years ago and now practices in clinical pharmacy. The nature of work is very different to engineering. Scope of practice is well defined and solutions are established, regulated, and repeatable in daily work. Consequences of mistakes can be severe but generally not catastrophic (death of a patient). The schooling of pharmacy is memory based and trains to follow guidelines and instructions as with most professions in healthcare. Engineering requires the understanding of core physics and technical fundamentals, and then promotes the creative application of these fundamentals. In other words, pharmacy requires one to put in the hours to study. Engineering can be understood with little studying if you just “get it”. But if you don’t, you can spend weeks and months studying and you still fail. Work life balance is variable for both careers depending where you end up. Salaries are comparable. Both careers require team work (peer to peer) and counselling skills (end user/patient). Hope this sheds a bit of light.
One supplemental point - an engineer’s reward to doing a good job is that the design is built and “it works”. You can pat your self on the back. “No news is good news” because your end users just expect your build or product to WORK. In clinical pharmacy, if you help with the health care of your patient, they will be very thankful. In retail pharmacy, maybe less because you do not get to know the patient.
Definitely had a similar experience in my career. I've worked at a handful of engineering companies in product design and the common denominator is that the majority of my engineering time is spent on manufacturability. Knowing in-house capabilities, knowing supplier capabilities and designing the product using that knowledge to meet requirements. Depending on the size of company and production turnover there's a varying emphasis on cost control, how stressful the deadlines are and how much administrative BS there is. Hands-on prototyping in the workshop is what I consider the fun part and paperwork (or meetings where nobody takes responsibility) is the least fun.
Agree. Cpk tests for manufacturability often reflect wishful thinking rather than capability and cost. I think physical (not just fe) modeling of concepts should be considered a discreet step in design, before prototyping, and design engineers should gain experience with this _and_ on the shop floor.
The thing that has been bothering me for quite a while is how underpayed (Mech) Engineers are. everytime you design and create something saving the company hunderds of thousands , if not millions. You might get a little bonus and still only get paid your hourly wage. Whats your opinion on this?
I wanted to do engineering however I got humbled in my first physics course. I struggled hard as hell. I figured if I couldn’t do that, I couldn’t do engineering. Really upset about it too.
I definitely can relate and bombed my first physics exam in university. If you are still interested in engineering, you could invest in a 3D printer and do some cool side projects💪
Some classes are designed to be weedouts. It’s easy to make a straightforward concept arbitrarily difficult to filter out people with weak trig,algebra, and calculus foundations.
Great brother.. I'm a product designer in India & my job is v. similar to you. Agreed these things ain't taught in schools until we enter in Industries scratching our heads. Also I'm looking for a job in US, please let me know if there is any opportunity for Product designer or conduct an iv.
I can definitely relate to what you said about engineering change notices bro! Every company's workflow seems very convoluted and un-streamlined that causes us to scratch our hands. On average, one simple ECN takes 2 months to complete at our company. Just thinking about it gives me high blood pressure😡
Actually the role of Tony Stark is like the Product Architect - they have the entire product in their mind and they need a team to execute that. A team without an architect is like a cruiser with a captain 😂! Anyways I hate the part where you have to send constant email and other admin/ bureaucracy type work as it actually eats away your time 😂
currently studying mechanical engineering and just cant wait to be part of this way of living knowing that even if its in the smallest way something i could do could impact how we advance on a whole around the world
you have some impressive projects under your belt, how do you tell recruiters that you left foxconn? a red flag for recruiters can be getting a sense that the engineer might not stay long enough to be an effective hire so they'd rather not hire them at all
in industrial engineering you are in the production area or semiconductor fab area a lot, collaborating with team members and figuring out problems. Then back to the standing desk to fire off some emails about the various issues and unresolved concerns, such as I.C.S. orders
I majored in Biochemistry when I was in school and now I am thinking of going back to school for a MS in Mechanical Engineering. Thank you for the information!
Sounds like it would not be a great career for me !! Personally the pie chart made me reconsider mechanical engineering :( like I want to be able to come into work everyday designing something cool like a rocket engine strapped to a vehicle lol
I really enjoyed this video and i I am currently 14 and years old and will be taking engineering class in high school. Just like you i want to be a mechanical engineer and designing roller coasters using CAD for the manufacturers. I've always been interested in how things work and I love learning about roller coasters and designing them on video games and I feel that mechanical engineering is my purpose on this earth. I am proud to be a nerd and to get a's and b's in school!
Don't listen to this guy. He's salty. Hone your skills, always find ways to make yourself irreplaceable, and find a good employer. I wish him the best of luck👌
@EngineeringGoneWild thank you man I appreciate the advice and support. I won't change my passion for anyone unless it's for the better. I will be an engineer and there's no doubt in my mind that I won't become one
Unrelated to video, can you please tell me what the difference between Mechatronics from Mechanical Engr department and Mechatronics from Electrical Engr department? If you could, please make a video?
I've never heard of a school offering two mechatronics programs. EE departments tend to be more rigorous, so I'd go there. Most schools don't even offer mechatronics. Usually, you go to the ECE college and get a job in the mechatronics field from there. Some also come from an ME background, but it's usually more difficult since they don't have the computing background which is integral.
Hi dude I have some doubt according to the fea analysis, In this analysis for an object(Electrical flying object) how can we analysis the object like full assemble or half an assemble???
comsol multiphysics for full assembly, or subroutines using Abaqus for partial assemblies; all depending upon what kind of physics you are capturing, and what boundary conditions you are assuming. if not, all can still be done in Simcenter or Ansys Mechanical
Why not to have own game ? Not to follow boss interests Money can not you get happy Who some day notice smart people names on production of them ? Not a few of them .
How I Spend my 150K Salary: ua-cam.com/video/g1FGX9bfWEI/v-deo.html
What are Mechanical Engineering Interviews Like: ua-cam.com/video/HfsBMNKRObo/v-deo.html
A Day in the Life of a Mechanical Engineer: ua-cam.com/video/jAqowG4fm8Y/v-deo.html
What Software do Engineers Need to Learn: ua-cam.com/video/F1SRnJqDPbI/v-deo.html
Check out my list of ME Technical Questions: payhip.com/EngineeringGoneWild
Love your video so much but can you become self-taught mechanical engineer?
@@theworldismine7788 Technically yes. There are people who work as mechanical engineers who don't have a degree. But a degree is often required, so if you want to be a mechanical engineer you should get the degree. But beware that many people have the degree and cannot get employment in this field.
Finally an accurate video about a job that gives an idea what a mechanical engineer actually do.
Usually people do a "day in a life of ..."-video and then they just film themselves eating.
Yep they don't say anything important or the needed details like in the video, you will just see them working on their computers, or doing things without telling what they do, or the steps.
It's a very good video
Eating and checking emails
Those are the OnlyFan one weekend Mechanical Engineers boot camp graduates.
lol the realest thing I have seen today
$150k is absolutely not the base salary. That’s considerably a very very high salary that only big tech companies supply. Base salary is around $70k.
You high bruh? 150k is very little for Silicon Valley😂
Where can I get a mechanical engineer for 70k in the usa?
70k is salary for a fresh graduate with zero experience. You have to start somewhere.
$150k in silicon is absolutely base salary
@@armandmatossian2081Dam that beats architecture by a mile.
Very well done. I do manufacturing engineering work for medical device companies and have a lot of the same responsibilities. I wish universities taugh more of this and not just math/science theory.
Hey man, I'm thinking of doing MS mechanical engineering in the US. Would you suggest me to carry on, or try to switch to fields like industrial engineering?
@@joswa5251 Both degrees are good, but I would say that mechanical gives you a broader base. If you know that you definitely want to work as an industrial engineer, then that is fine too. To be honest, it does not matter that much anyways.
Same, I hated that college doesn't teach you useful stuff but drive your focus away into the theory math part, which, you can just learn/copy base on the case you got
Good job ...and which software do you use in drawing?
I have started my career at 1984. My the 1st project was to design a storage for neutrons to boost nuclear explosion. 1. Selection of materials to store neutrons for years before a missile would be launched.2. Guarantee neutrons would be stored for years but released simultaneously into active zone of the nuclear warhead to boost chain reaction 3.Drawing and tests at different environmental conditions 4. Selection of processes and development them to deliver neutrons to the active core of the warhead simultaneously etc. My manager used to help me with explosives because I wasn’t certified to work with hazardous materials.
How did it go? I have been wondering about a similar project.
@@Alan-mq9om IMHO, the 1st nuclear project met a similar problem. I’d like to say, it is few decades old science. I use deuterium as neutrons source. Major problem I had solved was to synchronize neutrons delivery to the core when critical mass formation gets started. Nanoseconds critical process. The 2nd important problem was number of neutrons delivered to the core should be as expected, about same as total number of neutrons stored in storage. Wasting of neutrons in the delivery path would be an issue for the entire project. Imho, such kind a project is kind of basic problem in modern course of physics at any U. I don’t know exactly, my degree belongs to 1984, this project was done by me right after graduation in KB-11 if you are familiar with Soviet era Ministry of Medium Machinery in 1984-1985. I guess, it should be used in ICBMs USSR developed that time. I was quickly moved to another design company to develop thermobaric weapons and I wasn’t a part of underground tests. But I had tested my work in special blast protected lab and that worked as expected. Imho, any student working on his/her master degree in physics doing something similar at lab work. I used to have more interest that time to computer model of such process to develop computer model based on my experiments to describe the phenomena as close as possible to my tests. It was fun project for me, and I’m proud even today about my work to improve ICBM performance. BTW, at some point I was certified to work with hazardous materials
the whole time I was watching this video, I kept thinking "This sounds so cool!"
I am heavily considering going back to university for mechanical engineering and this video is making me believe that's a good choice, because I always get so excited watching these videos.
if u consider going back to school either focus on robotics OR manufacturing OR do computer eng/sicence; NOT a typical mechanical eng. this video is a flat lie.
Crazy high quality content! The editing wasn't groundbreaking or anything, but you really focused on what the viewer needs to hear and edited around that. Subbed 👍
Agreed, I liked the subtle funny details at 10:46
Most people have little understanding of what engineering actually is. Engineers have to combine scientific and mathematical knowledge with pragmatic, practical solutions whilst applying commercial acumen. Engineering is a very demanding high paced profession that requires a strong intellect, inventiveness, acute concentration and consistent attention to detail. Engineers apply standards of professionalism to their work that is rarely matched by by other professionals.
I am an automotive mech engineer. I design automotive interior products.
Thank you for your video.
My long-time queries about how engieers’ jobs are in different industries finally got resolved👍🏻
Now I understand the same or similar development processes are taken in different industries as well.
Hey Idk if your gonna see this but I love cars and engineering and what you said you do is basically one of my dream jobs, if I may ask you how you got to where you're at? What sort of qualifications did you need to get that job?
I've been wondering what I could expect and you're the first person to clearly tell me. Thanks for that
This is the type of video I've been looking for for months, Thanks.
You are an inspiration, hugs from Brazil.
Appreciate the support!
this has to be one of the more helpful videos I have found on this subject thank you
Majoring in mechanical engineering and it’s nice to see what my potential future might hold.
I myself am wanting to opt for mechanical.....
I am in my junior year of high school and am a mid range student who would like to major in mechanical engineering. What does it take? What should I do now?
@@johnomacian5586 start learning CAD
Same bro
@@johnomacian5586work on your focus and be ready for a lot of math😤 I’m only my second year in and I’m gassed
Best video! I love the pics helps me see what I’ll be working with. Also helps me pinpoint which type of engineering degree I want to specialize in.
Good content right there. This video has all that a new student would need to know about how every thing learnt fits together! My school failed miserably at teaching where and when different subjects were needed. Every school ought to have similar discussions where product development phases are discussed along with the subjects that apply during different phases.
As an aspiring mechanical engineer this video is so damn helpful! Schools never seem to go into detail about the product development process
cool
this is my life too... this guy nailed it.
Excellent videos, you are very explicative about all the production chain and our role as mechanical engineers.
So right!; FMEA isn't taught in ME school much, yet it's so important. Same with GD&T, which is important for creating detail drawings which will dictate processes, fits, and tolerances across diverse supply chains.
I just got my ME degree and I'm taking a GD&T class on my own because my school didn't mention it. I don't think it was even an elective.
@@MisterBinx Good for you! A CAD model is essentially a platonic ideal, while 2D detail drawings are often what suppliers/vendors work with to produce individual real-world components. As such, these drawings essentially become legal documents which define terms of a contract. It's in everyone's interest to minimize confusion/ambiguity and ASME Y14.5 is the most comprehensive standard for this. Learning it is akin to acquiring a language. Once fluent, design intent can be communicated precisely and efficiently. Good luck to you!
I can’t speak for other MEEN programs, but about half of my senior design class covered FMEA at Texas A&M. They made us use FMEA so much that it became redundant at a certain point for my project, although I’m sure it greatly benefitted other teams. I can’t say we ever touched on GD&T though.
Thank you for this video. I was watching a movie a few days ago and got bothered by their oversimplification of our job. Hats off 👍👍💯
Exactly. Although Ironman, star trek, and the like are a HUGE inspiration for engineers, it isn't that easy, lol.
"Tont Stark was able to build this IN A CAVE! WITH A BOX OF SCRAPS!"
Lol I am not majoring in mechanical engineering but I wanted to until I got a clear understanding that you can build iron man looking suits that fast I also thought it would’ve been a 1 person job
This dude be speaking in semi formal for the whole video, and then suddenly its the validation stage and he goes "in this stage we test the sh** out of the product"
I have a PhD in mechanical engineering and can tell you that 150K is NOT a salary you will get even as a senior engineer. just a click bait.
Whats base?
@@polishherowitoldpilecki5521 my own experience + my colleagues + statistics (check ANY credible website). Rarely a mech eng will get 150K; or any other engineer with the exception of computer eng. just google it.
With bachelors it’s been about 70k for a while but goes maybe closer to 90 for higher cost of living areas. Many people don’t break 6 figures until they have a good chunk of experience.
That’s because you guys only work 40 hours a week 😂
Dude, the video isn’t click.. Bait . The video isn’t about how much the engineer will make. It’s about what he does as a mechanical engineer, just read the title.
Awesome Video!
every great work needs a team 🙌🙌
Batman: say what?
Great videos ! Keep it up ! Please share something on Medical Devices Engineering sector. Product development part is almost the same, but to understand job markets over the globe.
I've been looking for this topic for years! You are very informative! Please make more videos further breaking down the steps, like a series! Thank you so much! SUBSCRIBED!!!
What's crazy is how much testing is needed for mass production, it's unbelievable.
ok
yes, and different levels of testing at various stages of design and production.
@@angelachanelhuang1651ok
There is no way you work at that desk with it being THAT clean
Great video. Currently a ME major, its tough, but going to be so worth it!
You got this!
4-6 years of hell for what? 70k salary and maybe touching 6 figures later into career, nah i don't think it's worth it.
@@ianarnold4653just why
@@ianarnold4653maybe for him it’s worth it, a lot of opportunities for ME graduates too
@@ianarnold4653u lowkey rught I finished my first year but the next 3 are hell fs
I’m halfway thru 3rd year and this is super exciting to me 😂
I made the same hauling nitrogen and I got a CDL but a lot of certifications and many hours at the steering wheel.
yeah engineering doesn't pay jack
Nice video. Subscribed
There is also a misconception that engineering work is interesting. I think one needs to have a high tolerance for excruciatingly tedious and mind-numbing work to be an engineer. I hated every engineering job I had and wished that I had not spent the time, money, and work on getting a BSME. Went back to school for several years in my 30's and became a biology professor for much less money.
This is the first videos thats explained what I actually want to know before I sign up for school😭 Thank you!!
How long do you typically spend on a project, start to finish? Also do you usually work on multiple projects at a time?
Run away as far as you possibly can from engineering. IT IS HELL. Remember, I warned you
@@christoesterhuyse5328can you specify what you mean?
@@christoesterhuyse5328elaborate
@@christoesterhuyse5328what should i do then
Nice video! I'm a mechanical engineer with product design myself.
Please how do I design my first product? I can use CAD software
Finally a non CS bandwagon mechanical engineer
I do 160k a year as a vehicle collision technician with a GED. It's very hard work and very stressful though.
Most people of that background will never reach that salary anyway
Very interesting video. Interesting using an iPhone as an example
For the people in the comments who are in their first years of school or aren't yet in school for ME I recommend joining clubs such as student racing teams. I joined one of those and even though I didn't give everything I could've given to it, there are some experiences I'd taken for granted that apparently are not that common, such as FMEA analysis, and other things you just don't learn in class, like talking to suppliers, talking to people from other disciplines, talking about money...
I specifically say "student racing teams" because the one I was a part of had an "industrialization" component of the project, even though you worked on a physical prototype, you were supposed to think about it with this industrial-production mindset. Some other competitions like robotics etc may differ a bit but they're probably a good idea too.
Thanks bruh for the details. u r a life Saver/Light Saber
Really good content , it was very informative and I learned bunch of new things, Thank you :)
I express my sincere interest in pursuing a bachelor's degree in mechanical engineering. Given my technical college experience in 2016, I seek guidance on recommended courses to commence my academic journey in 2023.
Thank you.
Realistic video 👍
easy video to follow, easy sub, very interesting thank you!
Thanks for the video!!!
This video gave me PTSD. Spent most of my early career as a Mechanical Engineer doing product design in the mining and oil and gas industries. Loss my interest in engineering and moved on to Project Management. Occasionally I still have to put on my Mechanical Engineer hat but overall I am glad I got out of it.
Glad to have found this channel 🎉
Hello, can you please make a video on the best industries to work for?
Should I join a smartphone company, a construction company or join a different industry. Which has the highest room for opportunity and growth?
That was very useful, thank you
Every work needs a team!
Very detailed , explained and conceptual video
Good video! Thank you!
Last 20% of the mechanical engineer work sounds exciting! 😄
What’s the part of the product life cycle where they’re engineered to fail shortly after the warranty expires? Which engineers are responsible for making products unserviceable? Or for using proprietary accessories and connectors instead of ones that use universal formats?
High voltage electrical power engineer here with about 20 years experience - the quoted salary is more for an experienced engineer.
Engineering itself is high stress and high liability. Work load is high and no one but you and your fellow engineers understand the complexity and consequences of the work you do.
Your MBA and accountant management tell you how slow you are and how much you overspent.
But if a catastrophic incident happens, you will be the one responsible.
Switched to project management, best career move ever.
All careers need hard work and endure some level of risk. Medicine pays 5 times higher.
Would you recommend pharmacy over engineering?
LOL My wife is a pharmacist. She completed her doctorate 20+ years ago and now practices in clinical pharmacy.
The nature of work is very different to engineering. Scope of practice is well defined and solutions are established, regulated, and repeatable in daily work. Consequences of mistakes can be severe but generally not catastrophic (death of a patient). The schooling of pharmacy is memory based and trains to follow guidelines and instructions as with most professions in healthcare. Engineering requires the understanding of core physics and technical fundamentals, and then promotes the creative application of these fundamentals. In other words, pharmacy requires one to put in the hours to study. Engineering can be understood with little studying if you just “get it”. But if you don’t, you can spend weeks and months studying and you still fail.
Work life balance is variable for both careers depending where you end up. Salaries are comparable.
Both careers require team work (peer to peer) and counselling skills (end user/patient).
Hope this sheds a bit of light.
One supplemental point - an engineer’s reward to doing a good job is that the design is built and “it works”. You can pat your self on the back. “No news is good news” because your end users just expect your build or product to WORK.
In clinical pharmacy, if you help with the health care of your patient, they will be very thankful. In retail pharmacy, maybe less because you do not get to know the patient.
10:30 took me out with the administrative section
10:48 "Ignoring Emails" HAHAHAHAH!!!
Definitely had a similar experience in my career. I've worked at a handful of engineering companies in product design and the common denominator is that the majority of my engineering time is spent on manufacturability. Knowing in-house capabilities, knowing supplier capabilities and designing the product using that knowledge to meet requirements. Depending on the size of company and production turnover there's a varying emphasis on cost control, how stressful the deadlines are and how much administrative BS there is. Hands-on prototyping in the workshop is what I consider the fun part and paperwork (or meetings where nobody takes responsibility) is the least fun.
Definitely agree with you! Meetings are the worst and prototyping is always a blast 💯
Agree. Cpk tests for manufacturability often reflect wishful thinking rather than capability and cost. I think physical (not just fe) modeling of concepts should be considered a discreet step in design, before prototyping, and design engineers should gain experience with this _and_ on the shop floor.
thanks ....This was very helpful
good man right here
Great work done
0:40 No one stops you from building your own stuff like engines or anything, it will just be for hobby
The thing that has been bothering me for quite a while is how underpayed (Mech) Engineers are. everytime you design and create something saving the company hunderds of thousands , if not millions. You might get a little bonus and still only get paid your hourly wage. Whats your opinion on this?
maybe in USA, but in AUS, usually Industrial designers take it from 0-100.
I wanted to do engineering however I got humbled in my first physics course. I struggled hard as hell.
I figured if I couldn’t do that, I couldn’t do engineering.
Really upset about it too.
I definitely can relate and bombed my first physics exam in university. If you are still interested in engineering, you could invest in a 3D printer and do some cool side projects💪
Some classes are designed to be weedouts. It’s easy to make a straightforward concept arbitrarily difficult to filter out people with weak trig,algebra, and calculus foundations.
@@Rudenbehr passed but barely but yea. My issue was mainly how to start the problem.
Thank you so much!
In UK it is called Design and Technology.
You considered doing mechanical design on the side?
For sure! I love designing things😁
I have looked for the similar video about mechanical engineer in Chinese website，but that is blank，thank you！
Mechanical engineer don't do much hands-on work in factory right?
Not really (I’m could be lying but idk) from what I understand they do most work in offices
mechanical engineering is really cool
My decision to study mechanical engineering feels even better now
Great in depth video thank you sir
as an unofficial Mechanical Engineer, how should I go about getting my bike produced in Canada?
Thank you for this video it is a very good breakdown of what you do
Thank you
Great brother.. I'm a product designer in India & my job is v. similar to you. Agreed these things ain't taught in schools until we enter in Industries scratching our heads.
Also I'm looking for a job in US, please let me know if there is any opportunity for Product designer or conduct an iv.
I can definitely relate to what you said about engineering change notices bro! Every company's workflow seems very convoluted and un-streamlined that causes us to scratch our hands. On average, one simple ECN takes 2 months to complete at our company. Just thinking about it gives me high blood pressure😡
The workflow definitely reminds me of a black hole that leads to nowhere😅
Actually the role of Tony Stark is like the Product Architect - they have the entire product in their mind and they need a team to execute that. A team without an architect is like a cruiser with a captain 😂!
Anyways I hate the part where you have to send constant email and other admin/ bureaucracy type work as it actually eats away your time 😂
Agreed😂
It really is a lot to consider, hard to find people of this caliber...😊
Please can you make a video about engineering physics?
Wait I thought you guys just complained about going over budget for a living?
currently studying mechanical engineering and just cant wait to be part of this way of living knowing that even if its in the smallest way something i could do could impact how we advance on a whole around the world
So I want to be a mechanical engineer but I’m horrible at math so does it take like lots of math to be a mechanical engineer
you have some impressive projects under your belt, how do you tell recruiters that you left foxconn? a red flag for recruiters can be getting a sense that the engineer might not stay long enough to be an effective hire so they'd rather not hire them at all
For more content like this!!
Good I love your job
How do I take this course? Am in Nigeria.
in industrial engineering you are in the production area or semiconductor fab area a lot, collaborating with team members and figuring out problems. Then back to the standing desk to fire off some emails about the various issues and unresolved concerns, such as I.C.S. orders
Question.. what do you mean by “process design oriented”?
go on
I majored in Biochemistry when I was in school and now I am thinking of going back to school for a MS in Mechanical Engineering. Thank you for the information!
Sounds like it would not be a great career for me !! Personally the pie chart made me reconsider mechanical engineering :( like I want to be able to come into work everyday designing something cool like a rocket engine strapped to a vehicle lol
I really enjoyed this video and i I am currently 14 and years old and will be taking engineering class in high school. Just like you i want to be a mechanical engineer and designing roller coasters using CAD for the manufacturers. I've always been interested in how things work and I love learning about roller coasters and designing them on video games and I feel that mechanical engineering is my purpose on this earth. I am proud to be a nerd and to get a's and b's in school!
@future2387 yes I know but that won't necessarily change my mind about being a mechanical engineer
Don't listen to this guy. He's salty. Hone your skills, always find ways to make yourself irreplaceable, and find a good employer. I wish him the best of luck👌
@EngineeringGoneWild thank you man I appreciate the advice and support. I won't change my passion for anyone unless it's for the better. I will be an engineer and there's no doubt in my mind that I won't become one
i want to do mechanical engineering when i an older
Unrelated to video, can you please tell me what the difference between Mechatronics from Mechanical Engr department and Mechatronics from Electrical Engr department? If you could, please make a video?
I've never heard of a school offering two mechatronics programs. EE departments tend to be more rigorous, so I'd go there. Most schools don't even offer mechatronics. Usually, you go to the ECE college and get a job in the mechatronics field from there. Some also come from an ME background, but it's usually more difficult since they don't have the computing background which is integral.
Pie chart was beautiful 😂😂
Which company are you working for?
I want to design the product as well as build it
Hi dude I have some doubt according to the fea analysis, In this analysis for an object(Electrical flying object) how can we analysis the object like full assemble or half an assemble???
comsol multiphysics for full assembly, or subroutines using Abaqus for partial assemblies; all depending upon what kind of physics you are capturing, and what boundary conditions you are assuming. if not, all can still be done in Simcenter or Ansys Mechanical
Why not to have own game ? Not to follow boss interests Money can not you get happy Who some day notice smart people names on production of them ? Not a few of them .