Fixing Your Creations - Episode 4 - Stormworks
Вставка
- Опубліковано 14 жов 2024
- Join MrNJersey in this new series where he takes a look at your broken creations and fixes them here in Stormworks.
Want to get your creation fixed? Join my discord and submit your creation under the "Fix-my-creation" channel or tweet me on twitter with the workshop link and whats broken.
-----------------------------------------------------------------------------------
👨👩👦👦 MrNJersey Gaming Offical Discord Server: / discord
👕 MrNJersey Gaming Offical Merch: tspr.ng/c/nj-g...
🐦 MrNJersey Twitter: / mrnjersey
🧡 MrNJersey Patreon Page: / mrnjersey
Join this channel to get access to perks:
/ @mrnjersey
-----------------------------------------------------------------------------------
Workstation & Gaming PC: www.amazon.co....
Audio Setup: www.amazon.co....
Please note that links above are affiliate links -- clicking them earns me a small commission if you make a purchase and helps support my UA-cam channel. Thank you!
-----------------------------------------------------------------------------------
Video Audio: UA-cam Audio Library
#MrNJersey #Stormworks
Nobody: Use a sharp curve to reduce drag
Developers: No it increases drag
I hope they fixed the multi-block wedges, that's absolutely tragic
weylin6 did they with 1.0 or not?
@@Quantum-Bullet They did not.
Thanks for the help. Regarding the first ship: exhaust reactively effects on movement. possibly exhaust on the left and its absence on the right, as opposed to the left, affects the constant roll to the right
For the last vessel, with the diesel electric system, i create a separate generator loop for the electric motors only, this way i can have a small or medium generator for the entire electric system and then drive the electric motors off large generators this way the motors can only use what the generators put out and you dont need large batteries to buffer the power
Luckely i dont need an expert to diognose my creations. But thanks for the tip on the wedges.
That second one... with the wedges...
EverBlue Gaming ya, it’s more about fix your wedges GAME.
yeah, I've read about it many times - but I didn't think it was _that_ bad.
Great vid NJ I'm loving the series!❤👍😋
Thanks for the advice, I'll change the drive system of my ship and see if that helps.
They need to fix the larger wedges and add more slanted window blocks
Really good series, keep it up NJ!
My suggestion is, if possible, devs actually can try to introduce block coefficient into the game. I know some shipbuilding game use this as a quick way to assist with calculating drag stuff but pretty messed up, worth a try anyway.
Great video, comrade!
I’ve been here since 200 subs, nice to see you have grown this far! Keep up the good work!
I would be interested to see if you simply replaced the fin that was opposite in its positive and negative if the problem would fix itself, I noticed if you have x-axis symmetry on when placing rudders and props that it inverts the +/- direction. Love the videos though new to the game and I definitely have a long way to go
I just found this game and i know that this video is six months old but I think that the problem might be single propeller design.
Using olnly one propeller that turns clockwise creates force that can turn ship counter-clockwise. It also creates different pressure on both size of the hull.
If this simmulation is accurate enough it may make effect
That's what I was thinking. Like in airplanes.
It’s not too much of an issue for ships.
For their immense size, weight, and resulting resistance in water, even the massive oil tankers, container ships, and more generally like to use 1 massive propeller because it’s cheaper and allows for a more efficient hull design.
Airplanes (specifically propeller airplanes and helicopters) suffer from the rotation issue because they have little resistance compared to their massive amounts of power and very light weights.
First off, let me say thank you for all these videos. Decided to try and tackle a Medium Small SAR Boat and now that I'm nearly done I'm working on the drivetrain and it feels like a dog with two medium engines. It's about 6k mass in total but after your little comment about the multi-block wedges I'm sure that's part of the problem and honestly makes me not even want to continue. I started with the hull and got the exact aesthetic I wanted but now I'm to understand that it's garbage because it uses multi-block angles? FRUSTRATING
To the guy who made the bomber, sometimes the wheels aren't strong enough/ are too small. They are greatly affected by weight so I would put bigger tires on it or double them up. Should look nice as well
I think a good general rule is if your plane weighs more than maybe 3000 kg or is expecting large amounts of impact, you need large hinges or magnets to hold the gear in place.
On the second one I could just feel the drag through my screen
Any reason why the wedges on boat #2 is slowing it down so much? I got similar edges and cornerblocks ETC on a pretty big boat and it would suck if im losing around 25-50% speed because i want it to look nice
HadHox in most cases you are. Sorry it break the news
But you just gotta look at this problem like Tim "The Tool Man" Taylor. The solution is "MOAR POWER!!!"
I regret nothing.
But that does suck. I've been making some aesthetically better crafts, but now they seem to lose all novelty. . . .
@@MrNJersey Well that truly sucks. You can make sooo much more with all these other pyramid/inverse pyramid and wedge blocks but what good does it do if you can barley drive your boat because for some reason they slow it down by a TON. Do the devteam know about this? Seems like something unintended IMO.
@HadHox it's very likely because, in the game, those wedges are coded as solid blocks, not angular ones, likely due to a bug, when specifically interacting with water. So they have more mass than they're supposed to and the front face is likely treated as a flat wall in water and creating excessive amounts of drag as a result.
Physics engines have to do a lot of cheating to make them work in real-time, things like converting the drag of a vehicle from being each individual part to a simplified estimate for the entire vehicle so it doesn't have to be constantly re-run, and given the complex nature of the interface between 2 fluid mediums (water and air), even a very tiny bug in how a block is coded would completely break the game's interpretation of the drag of that part and its impact on the rest of the creation. It will likely be fixed eventually, but that's a poor man's introduction to physics engines and should help to give a basic understanding of why it might be slowing creations down so much.
@@MrNJersey Do the wedges cause aircraft to slow down in the game the or dies it just affect boats
I guess I am a little hater of the clutch / gearbox for the direct drive.
The reason is it is so clunky to drive direct drive boats, so when I drive a good diesel or turbine electric it is wonderful!
No worries with having to declutch if you need to slow down, it just plain works and is easier to drive.
Closest I have seen is one with an automatic transmission, but even that one for forcing a slow down caused weird behaviours to occur and the engine get stuck in high rev, but not engaging drive.
Man this series is great. Great content sir.
holy crap i had no clue larger wedges were such a drag
MrNJersey Will this series be going on next year, if so I might be starting creating for stormworks and most probably be submitting an aircraft I'm planning to create
Its really *changing* , and fixing
At the first creation is it not because of the propeller momentum? I would try adding one counter rotating.
MrNJersey have new welcome speech
When the custom engine will add to this game?
We don't know just yet. Next update is focused around handheld gear. This is really the wrong place to be asking that though, your best bet would be to check on the official discord.
Custom engines will probably not come anytime soon
@@masterofthelag8414yeah.I knew that. But I want to found someone thinking same things.
@@hayamizo2802 Fair. I'm pretty sure it was really high up on the community poll they did to pick new features (and I think there were some images for them too at some point?) so I wouldn't be surprised if it was maybe one of the next major updates
I also want custom engines
I'm really surprised that new wedges cause more drag part. So broken physics we have in game.
LOL that first creation was rolling on the gyros pitch
the rudders went from the function block to stabilized roll, no yaw
Thanks for featuring my creation! (The RHIB)
Great Video...as usual!! 🤟😎The link mentioned in Your intro on how to submit to "FIX MY CREATIONS" is where?🙄
Link is in description and click on my discord one
wow, I'm not the only one using the new doors in everything lol.
this dude is the best at fixing creations
:)
Keep going👍
I've never liked the new wedges but I did not realize how poor they are
Lovely video xd ❤️
I'm on the fence on buying this game or not, is it worth the current asking price at its current state?
bennysingsforkids it’s only £16, worth every penny, tons of users with more than 2000 hours in game. Also price might not stay this low for much longer.
MrNJersey can you please do a tutorial about how to make your builds look better as I am right now having some difficulty making a car look good
My propeller plane overheats it’s engines very fast and it doesn’t move fast enough to take off. Is there a solution?
How many engines do you think I need for a large ship?
I have something I want to get fixed. It is a massive sea plane. I built it with folding wings and can't get it to take off. It keeps diving into the water at full speed. I have the same user name on steam.
Mr NJersey. Isn't the problem with the 1st one caused by the spinning dongles on top of the craft? Those small pivots, even though they're small, are both creating torque that's centered to throw the middle of the boat towards starboard the way they're turning. If those were deleted and there weren't any spinning ornaments I think the roll would be gone and the stabilization wouldn't be overworked to try to correct a "mysterious roll".
Watch it again and see how the 2 dongles are spinning. They should theoretically cancel each other out, but Stormworks laughs at theoreticals. They're literally acting as a counter gyro to the gyro being used to stabilize the swaying of regular sailing. This means that a possible second gyro needs to be added to counter the radar/beacon/light dongles on top that are spinning.
PSA to new players and the community who didn't know. Spinning anythings on top of creations 1. create a weird torque twist force that might turn/list/flip your creation. and 2. Drains your electricity needlessly. If it must spin have it on a breaker or a relay so you can conserve power when you're not using it. Please be aware of this. Most of the time your aesthetics and gimmicks are what's causing issues.
It’s is possible but once again anything is possible in stormworks. Just have to take the good with the bad.
The higher spinning pivot is for the Lidar system, and ye, I added the other pivot to cancel out the "strange roll" but to no avail. I also already tried deleting the whole section on top, but that made no difference. I think that the interior, due to it not being sealed, and more objects of the right side, leads to more drag, cause when I removed all of the interior, if veers right slightly(due to the driver's seat)
(Yes I am the creator)
@@pikapika-zm1gf Okay cool. I'm definitely not jabbing at you or anything. I just am going off of my own experience of having something set to spin on top of a creation and then instead my creation is spinning. . . . as if it was claimed by Mother Russia.😆
But it was just a thought. I think if the main hull isn't 100% sealed, then that could definitely be an issue. The other thing you could try is adding another prop with a small amount of power going to it. See if that will counter act it. (I'm spitballing.) Another thing, just spitballing again, could possibly be your gear boxes if you have a dual system in it (2 transmission systems going to each prop). One might be set to a different ratio than the other (I'm guilty of this and have wasted a few hours trying to fix a tank for this 1 simple slip up of mine.)
All in all though, it looks great and in the end I hope you get it going as you want it to. Most creations are for fun, but when they're as functional as that one seems to be headed towards, it makes them that much better. Good luck with that and sincere congrats on building it that far.
@@pikapika-zm1gf Maybe you should rotate the prop to spin to the left?
@@MrNJersey Mr Jersey,I would like to send in my boat which has a listing problem, but I don't have discord. I've tried everything to counter act the boat from listing to starboard, but it will either list to starboard or port, no sweet spot to it. How do I send it to you without Discord or Social Media sites?
I think it's great what you do but what is a real shame that you don't put the link in the description of the ships or boats or whatever else you can't find
Most of these are only uploaded as unlisted for the purpose of fixing. Then once fixed creators will then finish and do public release.
@@MrNJersey ok thx :)
Hey, question: every time when i build a ship (most with a flat bottom) its capsizes when i place superstructure, how to make its right and what is requirements?
If someone help, thanks for help.
It most likely has something to do with the weight distribution. If your center of gravity (the pink square) is too high up it will make the ship capsize. If you want to share a link to your creation I can maybe explain more
Linus Rieger is correct. You're probably putting too much on the superstructure, causing the weight distribution to rise over the waterline. If you want to "test" it to make sure, cut off your super structure and paste it back on as flat as you can to the deck. All you need is the mass of the superstructure. Spawn in your ship and see where the waterline comes up to.
Mark that area, roughly, with paint and then from there on out make sure the center of gravity marker is always below that. The further below that line it is, the more stable your ship will be. It's a lot of work, but once you build a bunch more, you'll get the "sense" of things.
Turn on the center of mass indicator in the workshop, a little pink box will appear somewhere in the middle of your creation. If that box is too high up it will cause massive instability, even stabilizers cant fix.
Paint a rainbow up the side of your ship near the COM and spawn it into the world. Before it capsizes - but after it settles to a steady level) go to camera mode to pause the game and note which colour is at the water line. Go back into the workship and see where your COM is in relation to that water line.
try to keep the COM as far bellow waterline as possible using a weighted keel. But don't forget that every componant has weight. Add a rail stabilizer if you want it low down in the ship (which in itself will also bring the COM down) , and I'd recomend putting your batteries on the stabilizer for extra mass. If you've only built the hull so far dont forget you'll be adding weight with interiors, logic blocks, exterior decoations, engines, fuel tanks, etc etc. So don't judge your creations stability purely off it's hull.
my ship is relatively flat bottomed too, but I have a keel on it that houses another forward/backward stabilizer (in adition to my tilt stabilizer) to resist tilt while ballast tanks fill up, it doesnt add much drag and helps with stability, both in actually resisting tilt due to drag of the block, and the weight so far bellow the rest of the ship drags the COM down pretty far.
Could u fix my creation my generator isn’t working
Hi Jersey can you fix nothing my creation ( it's actually the Ebon Hawk ) I can't use w key and pump b or a makes some strange noises.
Plane problem seams to be a physics being not on high problem
Why do the new wedges reduce speed by so much? Are they just "bugged?"
They have more drag
@@MrNJersey Wouldn't they have less drag if you placed them in the other orientation (horizontally instead of vertically)?
Wheels are glitched... period!.. Any thing on wheels will never be stationary over time.. brakes on or not :P
Someone from the discord channel asked if o would like my creating to be featured in the video, I agreed but my creation wasn't featured?
How long in between asking and getting confirmed?
21:42 Are the wedges still an issue on 1.0?
After I watched this video, I replaced all my wedges and my boat's speed increased from around 20 kts to over 40 kts. So I would say: "Yes, wedges are very much still an issue." It took me only a week of pointless trial and error to stumble over this video. 😜🤔
@@bonham1981 Thank you for testing that. What were the developers smoking when they programmed hydrodynamic wedges to have more water resistance. Goddamn hippies.
He opens the micro controller and I'm here like, okay it's cool and all but what the fuck
nice
More pls!!!
32:46 він обертається через те що в кокпіті панель що на шарнірі впирається в текстуру.
Please fix my Speedboat! It’s my first one ever!
Second
i dont need anything fixed, all i need is to make my apc look better
Wow
Hello
Lol vector runer like rune-er instead of runner
22:58 why does this work
Believe it or not, for pivots, 1:32 is the weakest and 1:1 is strongest
Other way around
@@MrNJersey I did test, in real life 1:1 would be weakest, but the devs made it weird
Pofg
Search- ' I need your help mrnjersey!2 he needs your help, his boat is too narrow and has stabilizing issues, anyone who can help, please do, I'm also trying my best, Thank you
first!
haya mizo NO
can you plz fix my creation